10" x 8" Boat Leveler Trim Tab Set Boat Outfitting

Features:

Wiring

Color-coded wiring in lengths from 25' to 40' with quick-connect fittings, meets federal standards for heat, traction and insulation, making installation easy.

Solenoids

They are custom designed for Insta-Trim Boat Leveler Co., epoxy sealed and moisture resistant, preventing short circuits. Solenoids lock tabs in any position, eliminating drift Barbed-style hose fittings provide tight, secure connections.

Motor

A powerhouse with coated wiring and thermal overload that resists temperature and amperage buildup. 1 3/4" battery windings and top mounting eliminate leakage. 'oil. The motor is mounted with stainless steel nuts and bolts anddisassembles easily.

Brackets

The swivel type brackets allow the cylinders to be mounted and adjusted to any what angle. Knockout pins act as shear pins when the tab hits an object.

Pump

Designed and manufactured exclusively by Instatrim . The built-in bypass is factory set at 400 P.S.I. tolerance maintained at 0.00025. The amperage does not exceed 16 because the unit circulates the oil, rather than stalling or trying to pump out extra pressure.

Motor Cover

4 1/2" D x 6" W x 11" H, impact-resistant ABS plastic cover with integrated oil tank mounts easily with two screws. Filler is located at the front Our cover protects the engine from occasional washes down

Cylinders

The cylinders are made of reinforced nylon. impact-resistant fiberglass eliminatest expansion and resist ultraviolet rays. , along with an O-ring, eliminate high and low pressure leaks. The barbed cylinder connection and an inserted tubular rod prevent explosion and breakage of the pipe.
A stainless steel spring retracts the cylinder when the boat is not moving.

Compensating tabs

12 gauge 304 stainless steel trim mats are available in standard and custom lengths. They are guaranteed against electrolysis, remaining strong and secure. Insta-Trim's hinges prevent most splashing and can be used for transom or bottom mounting.

Hose

Designed and manufactured exclusively for Insta-Trim with reinforced nylon webbing and protective PVC coating. Rated at 2,000 lbs burst pressure, 15' of hose is provided for your system. When entering the transom 6" beyondAbove the waterline, the hoses are held securely with a hose packing.
Stainless steel clamps hold the hose to the barbed fitting at the solenoid.

Toggle Type Controls

Mounted on the dashboard, they are easy to use. The 2TP microswitch with silver contact points adjusts the tabs for maximum control and performance.

A quart of Insta-Trim biodegradable transmission oil, a funnel and mounting hardware are provided.

Features: Color-coded wiring, 25' to 40' in length, with quick connect accessories, meets federal heat standards , voltage and insulation and is easy to install. The solenoid valve is Insta-Trim Boat Leveler Co. ,...
PRODUCT ID: 16208
SKU: NVN-16208
CSKU: CWR-16208
REWRITE: 27319-boat-leveler-10 -x-8-trim-tab
MPN: N108000
UPC: 000000162081
ASIN: B00FSC5AHI
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: Trim Tab Set for 10" x 8" boat leveler
NAME_EX: 10X8 INSTA TRIM Boat Leveler Trim Tab SET PN# N108000
PTITLE: 10" x 8" Boat Leveler Trim Tab Set
TYPE: Boat fitting | Trim Tabs
SELLER: Boat Leveler Co.
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> WATERCRAFT PARTS & ACCESSORIES
PC Accessory

Title Google:
PC Accessories
Gtags:

GSpecs:

10" x 8" Boat Leveler Decorative Tab Set Product Description Features:

Wiring

b>

Color-coded wiring in 25' to 40' lengths with quick-connect fittings, meets federal standards for heat, tensile and insulation, making installation easy.

Solenoid

They are custom designed for Insta-Trim Boat Leveler Co., epoxy sealed and moisture resistant, preventing short circuits Solenoids lock tabs in any position, eliminating drift Barbed type hose fittings provide tight, secure connections.

Motor

A powerhouse with coated wiring and thermal overload that resists temperature and amperage buildup in the battery windings. 1 3/4" and top mount eliminate leaksites of oil. The motor is mounted with stainless steel nuts and bolts and is easily disassembled.

Mounts

Type brackets Swivel allow cylinders to be mounted and adjusted to any angle Kn. Locking pins act as shear pins if the tab hits an object.

Pump

Designed and manufactured exclusively by Instatrim. The built-in bypass is factory set at 400 P.S.I. tolerance maintained at 0.00025. The amperage does not exceed 16 because the unit circulates the oil, rather than stalling or trying to pump out extra pressure.

Motor Cover

4 1/2" D x 6" W x 11" H, impact-resistant ABS plastic cover with integrated oil tank mounts easily with two screws. Filler is located at the front Our cover protects the engine from occasional down washes

Cylinders<.br>

Impact-resistant fiberglass-reinforced nylon cylinders eliminate expansion and resist ultraviolet rays. , along with an O-ring, eliminate high and low pressure leaks. The barbed cylinder connection and an inserted tubular rod prevent explosion and breakage of the pipe.
A stainless steel spring retracts the cylinder when the boat is not moving.

Compensating tabs

12 gauge 304 stainless steel trim tabs are available in standard and custom lengths. They are guaranteed against electrolysis, remaining strong and secure. Insta-Trim's hinges prevent most splashing and can be used for transom or bottom mounting.

Hose

Designed and manufactured exclusively for Insta-Trim with reinforced nylon webbing and protective PVC coating. Rated at 2,000 lb burst pressure,15' of pipe is provided for your system. Entering the transom 6" above the waterline, the hoses are held securely with a hose trim.
Stainless steel clamps hold the hose to the barbed fitting at the solenoid.

Toggle Type Controls

Mounted on the dashboard, they are easy to use The 2TP micro switch with contact points. Silver adjust tabs for maximum control and performance.

One quart of Insta-Trim biodegradable transmission oil, funnel and mounting hardware are provided.

Features: WirColor-coded wiring, 25 to 40 feet in length, with quick-connect accessories, meets federal heat, voltage and insulation standards, and easy to install. The solenoid valve is Insta-Trim Boat Leveler Co.,...

10" x 8" Boat Leveler Set.Related Products12vdc Boat Leveler Universal Trim Tab Pump with Oil and Hose Fittings
Boat Leveler Solenoid Valve - White Wires
Boat Leveler Solenoid Valve - Green Wires
Hydraulic Hose boat leveler - Sold by the foot
Boat Leveler Hydraulic Cylinder
Boat Leveler Tab Locator - Black
Boat Leveling Tab Locator - White
Rudder Anode Tecnoseal R1 - Zinc - 1-7/8" diameter
Tecnoseal R2 rudder anode - Zinc - 2-13/16" diameter
Tecnoseal R3 rudder anode - Zinc - 3-3/4 " in diameter

Frequently Asked Questions (FAQ) about the 10" x 8" Boat Leveler Who is the Boat Leveler Co.?
How to Describe the 10 Boat Leveler "; x 8" Trim Tab Set?
What is the construction of the product?
What is the actuator type?
Who is Boat Leveler Co.? Insta-Trim is the boat leveleroriginal hydraulic that delivers a better ride every time you leave the dock. Easy to install, Insta-Trim boat levelers are strong, durable and come in lengths to fit most boats, so any boating enthusiast can enjoy a superior Insta ride. -Trim has been committed to the marine industry for over 40 years, always ensuring you a quality conduit with excellent performance. How to Describe the 10" x 8" Boat Leveler Trim Tab Set Features: Color Coded Wiring, 25' to ? 40' long, with quick-connect accessories, meets federal heat, voltage and insulation standards, and is easy to install. The solenoid valve is Insta-Trim Boat Leveler Co.. ..What is the construction of the product? Stainless SteelWhat is the type of hydraulic actuator?

Save $305 on acat's 10" x 8" Boat Level Compensating Tab Set for only $474 at NVN Marin! Same day dispatch before 3 p.m. 10" x 8" Boat Leveler Compensating Tab Set Technical Specifications

Type:	Boat Equipment \| Trim Tabs
Seller:	Boat Leveler Co.
Weight:	21.4 lbs
Construction:	Stainless steel
Actuator type:	Hydraulic
User Guide:	Download PDF
Product Manual:	Download PDF
Product installation:	Download PDF

Boat Leveler 10" x 8" Trim Tab Set User ReviewsBoat Leveler 10" x 8" Trim Tab Set Shipping & Returns

Shipping Weight:	21.4 lbs
Box Sizes:	9.00 (h) x 14.00 (w) x 19.00 (w)
Cubic feet:	2394.0
Returnable:	Yes