Airmar B175C-20-HW-10F - B175 Wide and High Chirp 1 kW 20° Tilt 10 Pin Furuno DT Marine Navigation & Instruments

Get more coverage under your boat with Airmar's unique, wide-beam, high-frequency, Chirp-compatible transducer. The high band operates over a frequency range of 150 to 250 kHz and has a fixed 25° beam for all frequencies. The high frequency band allows higher resolution. The consistently wide beam provides twice the coverage and excellent fish arches on display compared to most narrow beam high frequency transducer options.

The high wide is the ideal choice for inshore and pelagic fishing, where resolution and maximum coverage under the boat are essential up to 152 m (500').

Tilted Element™ transducers have the element fixed at an angle of 20°, 12° or 0° in the housing. Since the transducer is installed almost flush with the hull, the tilt corrects the dead center of the hull and orients the ceramic element horizontally to ensureshooting maximum echo returns to the transducer.

The B175HW is available in three inclined element models:

Fixed 20° tIlated version for an angle of hull from 16° to 24°
Fixed version inclined by 12° for a hull angle of 8° to 15°
Fixed version inclined by 0° for a hull angle of 0° to 7°

Get more coverage under your boat with Airmar's unique, wide-beam, high-frequency, Chirp-ready transducer. The high band operates over a frequency range of 150 to 250 kHz and has a fixed 25° beam for all frequencies. The high frequency band allows higher resolution. The consistently wide beam provides twice the coverage and excellent fish arches on display compared to most narrow beam high frequency transducer options.

The high wide is the ideal choice for coastal and pelagic fishing, where the resolution andMaximum coverage under the boat is essential up to 152 m (500').

Tilted Element™ transducers have the element fixed at an angle of 20°, 12° or 0° in the housing . Since the transducer is installed almost flush with the hull, the tilt corrects the dead center of the hull and orients the ceramic element horizontally to ensure maximum echo returns to the transducer.

The B175HW is available in three inclined element models:

20° inclined fixed version for 16° to 24° hull inclination
Version fixed inclined by 12° for 8° to 15° hull inclination
Fixed version inclined by 0° for 0° to 7° hull inclination

Fast response water depth and temperature sensor
1 kW with a maximum depth of 152 m (500')
High frequency: 150 to 250 kHz
- 25° constant beam
100 kHz total bandwidthe from a transducer
Covers the popular fishing frequency of 200 kHz plus everything else in the bandwidth
High frequency provides superior shallow water performance , bottom details and separation between fish and targets
Large beam width provides greater coverage to detect fish in the upper water column.
Low profile through-hull housing provides good resolution at high speed when installed correctly
Bronze housing for use on stepped, planing or displacement hulls
Also available in stainless steel housing (SS175HW) and as transom (TM185HW) or in hull (M285HW) support
Exclusive Xducer ID™ technology

PRODUCT ID: 3000560
SKU: NVN-3000560
CSKU: CWR-3000560
REWRITE: 3011671 -airmar-b175c-20-hw-10f-b175-high-wide-chirp-1kw
MPN : B175C-20-HW-10F
UPC:
ASIN:
WSKU:
SSKU:
KSKU:
GSKU: B175C-20-HW-10F
MSKU:
LSKU:
NAME: Airmar B175C-20-HW-10F - B175 High Wide Chirp, 1 kW, 20° Tilt, Furuno 10 pin, DT
NAME_EX:
PTITLE: Airmar B175C-20-HW-10F - B175 High Wide Chirp, 1 kW, 20° tilt, Furuno 10 pin, DT
TYPE: Navigation and marine instruments | Transducers
SELLER: Airmar

Gtags:

GSpecs:

Airmar B175C-20-HW-10F - B175 High Wide Chirp, 1 kW, 20° Tilt, Furuno 10 Pin, DT Product Description

Get more coverage under your boat with Airmar's unique wide beam, high frequency , ready for the Chirp transducer. The high band operates over a frequency range of 150 to 250 kHz and has a fixed 25° beam for all frequencies. The high frequency band allows higher resolution. The consistently wide beam provides twice the coverage and excellent fish arches on display compared to most narrow beam high frequency transducer options.

The high wide is the ideal choice for inshore and pelagic fishing, where resolution and maximum coverage under the boat are essential up to 152 m (500').

Tilted Element™ transducers have the element fixed at an angle of 20°, 12° or 0° in the housing. Since the transducer is installed almost flush with the cockue, the tilt corrects the dead center of the hull and orients the ceramic element horizontally to guarantee maximum echo returns to the hull. transducer.

The B175HW is available in three models 'inclined elements:

Fixed version inclined at 20° for a hull grip angle of 16° to 24°
Fixed Version inclined at 12° for a hull grip hull from 8° to 15°
Fixed inclined version at 0° for hull grip from 0° to 7°

Get more coverage under your boat with Airmar's unique, wide-beam, high-frequency, Chirp-ready transducer. The high band operates over a frequency range of 150 to 250 kHz and has a fixed 25° beam for all frequencies. The high frequency band allows higher resolution. Consistently wide beam provides twice the coverage and excellent fish arches on screen compared to most high transducer optionste narrow beam frequency.

The high wide is the ideal choice for inshore and pelagic fishing, where resolution and maximum coverage under the boat are essential out to 152 m (500').

Tilted Element™ transducers have the element fixed at an angle of 20°, 12° or 0° in the housing. BSince the transducer is installed almost flush with the hull, the tilt corrects the dead center of the hull and orients the ceramic element horizontally to ensure maximum echo returns to the transducer.

The B175HW is available in three inclined element models:

Fixed version inclined at 20° for a hull angle of 16° to 24°
Fixed version inclined at 12° for a hull angle of 8° to 15°
Fixed version inclined at 0° for a hull inclination angle of 0° to 7°

Fast response depth and water temperature sensor
1 kW with maximum depthe of 152 m (500')
High frequency: 150 to 250 kHz
- 25° constant beam
100 kHz of total bandwidth from a single transducer
Covers the popular 200 kHz fishing frequency plus all the rest of the bandwidth
High frequency provides superior performance in shallow water, bottom details and separation of fish and targets
High beamwidth provides greater coverage for detecting fish in upper water pass
Low profile through-hull housing provides good resolution at high speed when installed correctly
Bronze housing for use on a stepped, planing or displacement hull
li>
Also available in a stainless steel housing (SS175HW) and as a transom (TM185HW) or hull mount (M285HW)
Exclusive Xducer ID™ technology

Frequently Asked Questions (FAQ) about Airmar B175C-20-HW-10F - B175 High Wide Chirp, 1kW, 20° Tilt, Furuno 10-Pin, DT Who is the Airmar?
How to describe it Airmar B175C -20-HW-10F - B175 High Wide Chirp, 1 kW, 20° tilt, Furuno 10 pin, DT?
Which mix and match cable is useful for this product?
What is the power rating of the product?
What are the transducer functions of the product?
In which country is this product manufactured?
What is the frequency band of the product?
What is what is the Airmar B175C-20 -HW-10F - B175 High Wide Chirp, 1kW, 20° tilt, Furuno 10 pin, DT package dimensions and weight?
What is the sensor connector of the product?
How to mount or what is the mounting style of the Airmar B175C-20-HW-10F - B175 High Wide Chirp, 1kW, 20° Tilt, Furuno 10-Pin, DT?
Is this product single or dual frequency?
What is the tilt angle of the product?
What is the display connector of theproduct?
Where is the product commonly used? product?
What is the connector type of the product?
What is the cable length?
What is the housing material of the product?
What is the maximum depth of the product? ? product?
What is the dead height range of the product?
What is the hole size of the product?
What is the high beam width of the product?
What is the high beamwidth of the product?
What is the high beamwidth of the product?
What is the frequency level of the product?
Does this product have an inclined element?
What Shell material is suitable for this product?
What is the usable shaft length of the product?
What is the maximum tilt angle of the product?
What do I is the maximum height of the product?
What are the manufacturer's ratings for Airmar B175C-20-HW-10F - B175 High Wide Chirp, 1kW, 20°Tilt, Furuno 10-Pin, DT?
Who is the Airmar? The right transducer improves the performance of any echo sounder, regardless of power level or price. From small jet ski sensors to large steel tank transducers, Airmar depth, speed and temperature sensors are the most responsive on the market. Airmar prides itself on the little extras added to products that make a big difference in performance and customer satisfaction. How to describe Airmar B175C-20-HW-10F - B175 High Wide Chirp, 1 kW, 20° Tilt, Furuno 10 pin, DT?

Get more coverage under your boat with Airmar's unique, wide-beam, high-frequency, Chirp-compatible transducer. The high band operates over a frequency range of 150 to 250 kHz and has a fixed 25° beam for all frequencies. The high frequency band allows higher resolution. Constantly wide beam delivers twicemore coverage and excellent fish arcs on display compared to most narrow beam high frequency transducer options.

The wide top is the ideal choice for inshore and pelagic fishing, where resolution and maximum coverage under the boat are essential up to 152 m (500').

Tilted Element™ transducers have the element fixed at an angle of 20°, 12° or 0 ° in the housing. Since the transducer is installed almost flush with the hull, the tilt corrects the dead center of the hull and orients the ceramic element horizontally to ensure maximum echo returns to the transducer.

The B175HW is available in three inclined element models:

Fixed version inclined at 20° for a hull angle of 16° to 24°
Fixed version inclined at 12° for a hull angle of 8° to 15°
Fixed version inclined at 0° for a hull deadrise of 0° to 7°

Which cable mix and match utile for this product? Chirp 12 Pin

Get more coverage under your boat with Airmar's unique, wide-beam, high-frequency, Chirp-compatible transducer. The high band operates over a range of freqsuences from 150 to 250 kHz and has a fixed 25° beam for all frequencies. The high frequency band allows higher resolution. The consistently wide beam provides twice the coverage and excellent fish arches on screen compared to most narrow beam high frequency transducer options.

The High Wide is the ideal choice for inshore and pelagic fishing, where resolution and maximum coverage under the boat are essential up to 152 m (500').

The B175HW is available in three inclined element models:

Fixed version inclined at 20° for an anglehull angle from 16° to 24°
Fixed version inclined at 12° for a hull angle of 8° to 15°
Fixed version inclined at 0° for an angle of hull inclination from 0° to 7°

$240

Airmar B175C-20- HW -10F - B175 High Wide Chirp, 1 kW, 20° Tilt, Furuno 10 Pin, DT

$1,089

Type:	Navigation and marine instruments \| Transducers
Supplier:	Airmar
Weight:	10.79 lbs

Shipping Weight:	10.79 lbs
Box sizes:	10.00 (h) x 8.00 (w) x 11.00 (w)
Cubic feet:	880.0
Returnable:	Yes

For a detailed shipping policy, please see our shipping policy and you can find our return and refund policy here.