Airmar B175C-20-M 20d tiltable without MM cable connector Marine Navigation & Instruments

1 kW

The B175M's midrange frequency provides the right combination of underboat coverage, extended depth range, and the ability to produce targets and clean targets and precise. structure returns to mid to deeper water. Mid Frequency also provides excellent mid-depth performance, bottom detail and fish-target separation. Operating over a frequency range of 85 to 135 kHz, this transducer reveals fish at average depths of up to 1,500 ft (457 m) and provides ultra-clear target resolution.

L Airmar's inclined element^{™ transducers have the element fixed at an angle of 20°, 12°, or 0° in the housing. Since the transducer is installed almost flush with the hull, the tilt corrects the dead center of the hull. It orients the ceramic element horizontally to guarantee maximum echo returns to the transducteur.}

^{The B175M is available in three inclined element models:}

^{Fixed version inclined at 20° for 16 to 24° hull grip angles}
^{FixedVersion inclined at 12° for hull angles from 8 to 15°}
^{Fixed version inclined at 0° for hull angles from 0 to 7°}

^{Chirp Airmar B175 Mid-Frequency 20d Inclined Element with Bare Wire Mix-N-Match Cable}

^{Model: B175C-20-M-0}

^{Depth and fast response water temperature sensor}
^{Medium: CHIRPS from 85 kHz to 135 kHz}
^{Beam width from 24° to 16 °}
^{50 kHz total bandwidth of a transducer}
^{Covers the popular fishing frequencies of 88 and 107 kHz as well as everything else in the bandwidth}
^{Hull type: fiberglass or wood}
^{Boat size: 8 m (25') and above}

^{Rely on new transducers Airmar broadband for your ultimate fishing mission. That you are pêcommercial fisherman, charter captain or tournament fisherman, there's a new game in town! Chirp transducers provide bottom sensing down to 3,000 m (10,000') with 5 to 10 times greater detail and such fine resolution that it is possible to distinguish individual baitfish, game and structures beneath -marines. One transducer provides up to 50 kHz of total bandwidth in a single installation, saving customers time and money.}

^{Specifications}

Deadrise	16° to 24°
Acoustic window	Urethane
Rated power	1 kW at 1% duty cycle
Frequency	85-135 kHz

^{Box contents:}

^B175C-20-MM
^MMC-0

^{Airmar B175 chirp IF 20d incl elementinison, with bare -Matching N-type hybrid cable Model: B175C-20-M-0 Medium-CHIRPS Fast Response Water Depth and Temperature Sensor, Frequency 85kHz to 135kHz at 24° to 24° Beam 16° Width is 50 kHz in total. ...> MPN: B175C-20-M-0
UPC:
ASIN:
WSKU: AIRB175C20M0
SSKU:
KSKU:
GSKU: B175C-20-M-0
MSKU:
LSKU:
NAME: Airmar B175C-20-M 20d Tilt without MM Cable connector
NAME_EX:
PTITLE: Airmar B175C-20-M 20d Tilt with MM Cable without connector
TYPE: Navigation and marine instruments | Transducers
SELLER: Airmar
Airmar B175 Chirp Transducer - No Connector - 20 Deg Medium

Gtags:

GSpecs:

Airmar B175C-20-M 20d Tilt without Connector MM Cable Product Description}

^{1 kW}

^{The mid frequency of the B175M provides the right combination of coverage under the boat, a extended depth range and the ability to produce clean, accurate target and structure returns in mid to deeper waters. Mid Frequency also provides excellent mid-depth performance, bottom detail and fish-target separation. Operating over a frequency range of 85 to 135 kHz, this transducer reveals fish at average depths of up to 1,500 ft (457 m) and provides ultra-clear target resolution.}

^{L Airmar's inclined element^{™ transducers have the element fixed at an angle of 20°, 12°, or 0° in the housing. Since the transducer is installed almost flush with the hull, the tilt corrects the dead center of the hull. It orients the ceramic element horizontally to ensure maximum echo returns to the transducer.}}

^{The B175M is available in three inclined element models:}

^{FiVersion fixed inclined at 20° for hull angles from 16 to 24°}
^{Fixed version inclined at 12° for hull angles from 8 to 15°}
^{Fixed version inclined at 0° for 0 to 7° hull blind spots}

^{Airmar B175 Medium Frequency Chirp 20d Inclined Element with Bare Wire Mix-N-Match Cable}

^{Model: B175C-20-M-0}

^{Fast Response Water Depth and Temperature Sensor}
^{Medium: CHIRPS 85kHz to 135kHz}
^{24° up to 16° beamwidth}
^{50kHz total bandwidth from one transducer}
^{Covers popular fishing frequencies from 88 and 107 kHz plus everything else in the bandwidth}
^{Hull type: Fiberglass or wood}
^{Boat size: 8 m (25') and above}

^{Rely on new traAirmar broadband conductors for your ultimate fishing mission. Whether you're a commercial fisherman, charter captain, or tournament fisherman, there's a new game in town! Chirp transducers provide bottom detection down to 3,000 m (10,000') with 5 to 10 times more detail. And resolution so precise that it's possible to distinguish between individual baitfish, game and underwater structures. One transducer provides up to 50 kHz of total bandwidth in a single installation, saving customers time and money.}

^{Specifications}

Deadrise	16° to 24°
Acoustic window	Urethane
Rated power	1 kW at 1% duty cycle
Frequency	85-135 kHz

^{Contents ofthe box:}

^B175C-20-MM
^MMC-0

^{Airmar B175 chirp IF 20d element tilt, with bare -Matching N-type hybrid cable Model: B175C-20-M-0 Medium-CHIRPS fast response depth and water temperature sensor, frequency 85 kHz to 135 kHz at 24° beam 16° Width is 50 kHz in total. ..

Frequently asked questions (FAQ) about Airmar B175C-20-M 20d Tilt without MM cable connector Who is the Airmar?
How to describe the Airmar B175C-20-M 20d Tilt without MM cable connector?
Which mix and match cable is useful for this product?
What is the power rating of the product?
What are the transducer functions of the product?
In which country is this product manufactured?
What is the frequency band of the product?
What are the dimensions and weight of the Airmar B175C-20-M 20d Tilt cable without MM connector?
What is the sensor connector of the product?
How to mount orwhat is it What is the mounting style of the Airmar B175C-20-M 20d Tilt without MM cable connector?
Is this product single or dual frequency?
What is the tilt angle of the product?
What is the display connector of the product?
What is the common use location of the product?
What is the connector type of the product?
What is the length of the cable?
What is the housing material of the product?
What is the maximum depth of the product?
What is the deadrise range of the product?
What is the hole size of the product?
Does this product have inclined element?
What shell material is suitable for this product?
What is the average frequency level of the product?
What is the average frequency beam width of the product?
What is the usable shaft length of the product?
What is the height maximum dead angle of the product?
What is the maximum rise anglethe product?
What are the manufacturer's notes on the Airmar B175C-20- M 20d Tilt without MM cable connector?
Who is the Airmar? The right transducer improves the performance of any echo sounder, regardless of power level or price. From small jet ski sensors to large steel tank transducers, Airmar depth, speed and temperature sensors are the most responsive on the market. Airmar prides itself on the little extras added to products. It makes a big difference in performance and customer satisfaction. How to describe Airmar B175C-20-M 20d tilt without connector MM cable?}

^{1 kW}

^{The B175M's midrange frequency provides the right combination of underboat coverage, extended depth range, and the ability to produce targets and clean targets and precise. structure returns to mid to deeper water. The mid frequency also offersnt excellent deep to medium depth performance, bottom detail and fish-target separation. Operating over a frequency range of 85 to 135 kHz, this transducer reveals fish at average depths of up to 457 m (1,500') and provides ultra-clear target resolution.}

^{Airmar Angled Element^™ transducers have the element fixed at an angle of 20°, 12° or 0° in the housing. Since the transducer is installed almost flush with the hull, the tilt corrects the dead center of the hull. It orients the ceramic element horizontally to ensure maximum echo returns to the transducer.}

The B175M is available in three angled element designs:

Fixed version inclined at 20° for hull angles of 16 to 24°
Fixed version inclined at 12° for 8 to 15° hull grip angles
Fixed inclined version at 0° for hull grip angles from 0 to 7°

Airmar B175 Chirp Medium 20d frequency inclined element with bare wire Mix-N-Match cable Model: B175C-20-M-0Depth sensor and Fast Response Water Temperature Medium & 8212;CHIRPS from 85 kHz to 135 kHz 24 & 176; at 16& 176; beam width 50 kHz total
The Airmar B175 Chirp is an excellent choice for a wide variety of applications, including commercial fishing, recreational fishing, as well as research and rescue.
The Airm

Airmar's all-new B175 Chirp sonar offers the latest technology in deep water sensing.
The 20 degree angled element design and cable combination provide a variety of options for your boat.
The deep water temperature sensor Water provides readings of -2 degrees to 104 degrees Fahrenheit.

Which mix and match cable is useful for this product? Chirp

Airmar B175 12-pin chirp, element iMedium Frequency 20d Angled with Bare Wire Mix-N-Match Cable Model: B175C-20-M-0Medium&8212;CHIRPS Fast Response Depth and Water Temperature Sensor from 85kHz to 135kHz 24&176 ; at 16& 176; 50 kHz total beamwidth
The Airmar B175 Chirp is an excellent choice for a wide variety of applications, including commercial fishing, recreational fishing, and search and rescue.
The Airm
Airmar's all-new B175 Chirp sonar offers the latest technology in deep-water detection.
The 20-degree inclined element design and cable combination provide a variety of options for your boat.
Water temperature sensor provides accurate readings from -2 degrees to 104 degrees Fahrenheit.
The Airmar B175 Medium Frequency Chirp 20d Inclined Element with Bare Wire Mix-N-Matching Cable Model: B175C-20-M-0 The depth and temperature sensor of theFast response water is a very reliable and reliable product.
This product is capable of detecting sound up to 16 kilometers away.
Airmar B175 Chirp Inclined Element 20d to Medium Frequency with Bare Wire Mix-N-Match Cable Model: B175C-20-M-0Fast Response Water Depth and Temperature Sensor Medium&8212;CHIRPS 85kHz to 135kHz 24&176; at 16& 176; beamwidth 50 kHz total
Airmar's next generation CHIRP sonar is the latest innovation in high frequency sonar technology. Featuring a water depth and temperature sensor, this transducer can be

What is the power rating of the product? 1 kWWhat are the functions of the product transducer? Depth, temperatureIn which country is this product manufactured? USAWhat is the frequency band of the product? MediumWhat are the dimensions and weight of the Airmar B175C-20-M 20d tilt without MM connector? 8(l) X 10 (h) X 11 (w) inchesAnd the weight is: 11.03 lbs. What is the product sensor connector? MMCHow to mount or what is the mounting style of Airmar B175C-20-M 20d Tilt without connector MM cable? Angled Element Through HullIs this product single or dual frequency? CHIRP-Ready Single-BandWhat is the tilt angle of the product? 20°What is the display connector of the product? 0What is the common usage location of the product? FishingWhat is the connector type of the product? Bare wireHow long is the cable? 10 m (33')What is the material of the product casing? BronzeWhat is the maximum depth of the product? 1457 m (1500')What is the Deadrise product range? 16° to 24°What is the hole size of the product? Fiberglass or wood shell 95 mm (3-3/4"), Metal shell 105 mm (4-1/8")Does this product have an inclined element? YesWhich shell material is suitable for this product? Fiberglass or woodWhat is the fre levelaverage quality of the product? 85-135 kHzWhat is the mid-frequency beamwidth of the product? 16°-11°OWhat is the usable stem length of the product? 55 mm (2.18")What is the maximum height of the product? Up to 24°What is the maximum rise angle of the product? 24°What are the manufacturer's notes for the Airmar B175C-20-M 20d Tilt without MM Cable connector

1 kW

The mid frequency of the B175M provides the right combination of underboat coverage, extended depth range and ability to produce clean, accurate targets and structure returns in mid to deeper waters. Mid frequency also provides excellent performance, bottom detail and target fish separation Operating over a frequency range of 85 to 135 kHz. , this transducer reveals fish at average depths of 457 m (1,500') and offers ultra-clear target resolution.

The transducers.Airmar's Tilted Element^™ have the element fixed at an angle of 20°, 12° or 0° in the housing. Since the transducer is installed almost flush with the hull, the tilt corrects for the dead hull. It orients the ceramic element horizontally to ensure maximum echo returns to the transducer.

The B175M is available in three angled element designs:

Fixed version inclined at 20° for 16 to 24° hull grip angles
Fixed version inclined at 12° for hull grip angles from 8 to 15°
Version fixed tilted 0° for hull grip angles from 0 to 7°

Save $142 when you purchase the Airmar B175C-20-M 20d tilt without MM cable without connectorfor only $1,047 from NVN Marine! Same day dispatch before 3 p.m. Airmar B175C-20-M 20d Tilt without connector MM cable Technical specifications

Type:	Navigation and marine instruments \| Transducers
Supplier:	Airmar
Weight:	15.0 lbs
User Guide:	Download PDF
Product Manual:	Download PDF
Product brochure:	Download PDF
Product installation:	Download PDF

Airmar B175C-20-M 20d tilt without MM cable connector User reviewsAirmar B175C-20- M 20d tilt without connector MM Cable Shipping & Returns

Shipping Weight:	15.0 lbs
Box sizes:	1.00 (h) x 1.00 (w) x 1.00 (w)
Cubic feet:	1.0
Returnable:	Yes
USPS First Classe:	Yes
P65:	Yes

For more detailed shipping policy, please see our shipping policy and you can find our return and refund policy here.