Airmar B75C-0-M 0d Medium Tilt Cable CHIRP Furuno 12 Pin Airmar
Airmar B75C 0° Angled Element Medium CHIRP Bronze Thru Hull with 12-Pin Furuno Mix-N-Match Cable
Model: B75C-0-M-12F- Fast response depth and water temperature sensor
- 600W of power with a maximum depth of 274m (900')
- Average frequency: 80 to 130 kHz
- 24° to 16° beamwidth
- Mid frequency provides good shallow water performance, bottom detail and deeper performance than high frequency band
- Low profile, thru-hull housing provides good display resolution at high speeds when installed correctly
- Bronze housing for use in a fiberglass or wood hull
- Patented Xducer ID Technology
Airmar's low-profile, Chirp-ready transducer models are the perfect complement to small boats such as center consoles. Running on a pRanging from 80 to 130 kHz, the B75M offers up to 50 kHz of total bandwidth in a single installation. This transducer shows amazing bottom details in shallow and medium depths down to 274 m (900').
When the transducer is installed almost flush with the hull, the tilt of the element corrects the deadrise of the hull, directing the beam directly downward. This ensures maximum echo return to the transducer and more accurate depth readings.
Specifications| Dead rise range | 0° to 7° |
| Hole Size | 70 mm (2-13/16"") |
| Case Material | Bronze |
| Deadrise | 0° to 7° |
| Maximum depth | 900 feet |
| Medium frequency | 80 to 130 kHz |
Box contents:
- B75C-0-M-MM
- MMC-12F Cable
Airmar B75C 0° Tilt Element Medium CHIRP Bronze Thru-Shell with 12 Pin Furuno Mix-N-Match Cable
Model: B75C-0-M-12F- Fast response water depth and temperature sensor
- 600W of power with a maximum depth of 274 m (900')
- Mid frequency: 80 to 130 kHz
- Beam width of 24° to 16°
- Mid frequency offers good shallow water performance, bottom detail and performance deeper than the high frequency band
- Low profile through-hole housing provides good display resolution at high speeds when installed correctly
- Bronze housing for use in fiberglass or wood hull
- li>
- Patented Xducer ID technology
Low-profile, Chirp-ready transducer modelsAirmar are the perfect complement to small boats such as center consoles. Operating over a frequency range of 80 to 130 kHz, the B75M offers up to 50 kHz of total bandwidth in a single installation. This transducer shows amazing bottom detail at shallow and medium depths down to 274 m (900').
When the transducer is installed almost flush with the hull, the tilt of the transducer The element corrects the dead center of the hull, directing the beam directly downward. This ensures maximum echo return to the transducer and more accurate depth readings.
Specifications| Dead rise range | 0° to 7° |
| Hole Size | 70 mm (2-13/16"") |
| Case Material | Bronze |
| Deadrise | 0° to 7° |
| Maximum depth | 900 feet |
| Medium frequency | 80 to 130 kHz |
Box contents:
- B75C-0-M-MM
- MMC-12F cable
Save $89 when you purchase the Airmar B75C-0-M 0d Tilt Medium CHIRP Furuno 12 Pin Cable for only $741 at NVN Marine Same day shipping before 3pm Airmar B75C-0-M 0d Tilt Medium CHIRP Furuno 12 Pin Cable Technical SpecificationsType:
| Navigation and marine instruments | Transducers | |
| Supplier: | Airmar |
|---|---|
| Weight: | 5.0 lbs |
| Shipping Weight: | 5.0 lbs |
|---|---|
| Box Sizes: | (h) x (l) x (l) |
| Cubic Feet: | 0 |
For detailed shipping terms, please see our Shipping Policy and you can find our return and refund policy here.
- Airmar B75C-0-M 0d Tilt Medium CHIRP Bare Wire Cable
- Airmar B75C-0-L 0d Tilt with 8-Pin Si-Tex Cable
- Airmar B75C-0-L 0d Tilt with Raymarine 11 pin cable
- Airmar B75C-0-L 0d Tilt with Mix-n-Match Plug
- Airmar B75C-0-L 0d Tilt with 8-pin Garmin cable
- Airmar B75C-0-L 0d Tilt with Garmin 12 pin cable
- Airmar B75C-0-L 0d Tilt with bare cable
