Airmar DT812BV-235-N2 Tilt Element 235 kHz Smart Sensor 12° Tilt Bronze NMEA 2000 Marine Navigation & Instruments

The DT800 uses Airmar's proven tilted element and broadband technologies in this intelligent depth and temperature sensor. The DT800 is a retractable, low-profile through-hull sensor that accurately calculates depth and temperature data and sends it to the NMEA 2000 network. Airmar's smart sensors incorporate microelectronics: the transducer element and the signal processor are only a few millimeters apart. The depth transducer signal is processed directly inside the sensor itself. All that is needed to receive depth and temperature data is a simple cable to a compatible network or display.

The ceramic is angled inside the housing, compensating for the dead state of the hull and directing the transducer beam downward. This results in strong echo returns and accurate depth readings. The DT800 is sold with a choiceix of robust housings – in plastic, bronze or stainless steel – to adapt to any type of vessel or hull material. These low profile housings do not affect the performance of the case.nd will give accurate readings at high speeds. The housing features a water valve that minimizes water entry into the boat when the retractable insert is removed and replaced with the blanking plug.

The DT800 is available in three models of inclined elements:

Fixed version inclined at 20° for hull angles from 16° to 24°
Fixed version inclined at 12° for hull angles from 8° to 15°
Fixed version inclined at 0° for hull angles from 0° to 7°

Airmar DT812BV- 235-N2 235 kHz Low Profile Tilted Element Smart Sensor 12° Tilt Bronze NMEA 2000

Airmar has taken its proven tilted element and broadband technologies and applied them to its leading range of smart sensors. The DT800 is a low-profile, retractable thru-hull sensor that calculates precise depth and temperature data and sends it to any NMEA 0183 or NMEA 2000 display. The DT800 operates at a frequency of 235 kHz and can operate simultaneously with other Airmar 50/200 kHz trans.Ducers on board without interference. Broadband ceramic provides depth readings up to 183M (600'), as well as accurate shallow water readings down to 500mm (1.6').

Airmar's Smart sensors integrate microelectronics: the transducer element and the signal processor are only a few millimeters apart. The depth transducer signal is processed directly inside the sensor itself. All you need to receive depth and temperature data is a single cable to a compatible device or display. Since the ceramic is angled inside the housing, the beamof the transducer faces downward, resulting in strong bottom echo returns and accurate depth readings. Retractable housing with self-closing valve reduces water flow into the container when the transducer is removed for cleaning.

Smart Sensor Features

Improved depth performance
Maximum depth range: 180M (594 ft)
Minimum range: 0.5M (1.6 ft)
Urethane face provides better sensitivity
Excellent high speed performance
Fixed 20° tilt for one angle tilt from 16° to 24°
Fixed 12° Tilt for tilt from 8° to 15°
Fixed tilt from 0° to tilt from 0° to 8°
NMEA 2000 output
Power 100 W RMS
Frequency: 235 kHz
Cone: 12°
All models have depth and temperature
235 kHz eliminates interference with fishfinders
Retractable insert makes maintenance easier
Usable shaft length: 57 mm (2.25")
0.6 M (19.8 ft) NMEA 2000 Devicenet cable and connector
51 mm housing ( 2")
Blanking plug included
Suitable for hull thicknesses up to 54 mm (2-1/8")
Suitable for minimum shell thicknesses of 6.3 mm (0.25")

Airmar DT812BV-235-N2 Slim 235 kHz inclined element, intelligent sensor, 12° inclined bronze, NMEA 2000 Airmar applied its mature inclined element. €ž¢ and broadband technology for its leader...
PRODUCT ID: 59744
SKU: NVN-59744
CSKU: CWR-59744
REWRITE: 70855-airmar-dt812bv-235-n2 -235-khz-tilted-element -153-smart-153
MPN: DT812BV-235-N2
UPC: 098377518808
ASIN:
WSKU:
SSKU:
KSKU:
GSKU: DT812BV-235 -N2
MSKU:
LSKU:
NAME: Airmar DT812BV-235-N2 Tilted Element 235 kHz Smart Sensor 12° Tilt Bronze NMEA 2000
EX_NAME: AIRMAR DT800 12 DEGREE TILTED NMEA2000 DEPTH AND TEMP SMART
PTITLE: Airmar DT812BV-235-N2 Tilted Element 235 kHz Smart Sensor Tilt 12° Bronze NMEA 2000
TYPE: Navigation and Marine Instruments | Transducers
SELLER: Airmar
ELECTRONICS> MARINE ELECTRONICS> FISH FOUNDERS Airmar DST810 235 kHz Plastic Smart Sensor - NMEA 2000 - Bluetooth
AmazonCategory:
Gtags:

GSpecs:

Airmar DT812BV-235-N2 Tilted Element 235 kHz Smart Sensor Tilt 12° Bronze NMEA 2000 Product Description

The DT800 uses Airmar's proven tilted element and wideband technologies in this intelligent depth and temperature sensor . The DT800 is a retractable, low-profile through-hull sensor that accurately calculates depth and temperature data and sends it to the NMEA 2000 network. Airmar's smart sensors incorporate microelectronics: the transducer element and the signal processor are only a few millimeters apart. The depth transducer signal is processed directly inside the sensor itself. All that is needed to receive depth and temperature data is a simple cable to a compatible network or display.

The ceramic is angled inside the housing, compensating for the dead state of the hull and directing the transducer beam towardsthe bottom. This results in strong echo returns and accurate depth readings. The DT800 is sold with a choice of rugged housings: plastic, bronze or dye-less steel - to suit any vessel type or hull material. These low profile housings do not affect hull performance and will give accurate readings at high speeds. The housing features a water valve that minimizes water entry into the boat when the retractable insert is removed and replaced with the blanking plug.

The DT800 is available in three models of inclined elements:

Fixed version inclined at 20° for hull angles from 16° to 24°
Fixed version inclined at 12° for hull angles from 8° to 15°
Fixed version inclined at 0° for hull angles from 0° to 7°

Airmar DT812BV- 235-N2 235 kHz Low Profile Tilt Element Smart Sensor 12° Tilt Bronze NMEA 2000

Airmar ahas taken its proven tilted element and broadband technologies and applied them to its leading range of smart sensors. The DT800 is a discreet, retractable through-hull sensor that calculates precise depth and temperature data and sends it to any NMEA 0183 or NMEA 2000 display. The DT800 operates at a frequency of 235 kHz and can operate simultaneously with other onboard Airmar 50/200 kHz transducers without interference. Broadband ceramic provides depth readings up to 183M (600'), as well as accurate shallow water readings down to 500mm (1.6').

Airmar's Smart sensors integrate microelectronics: the transducer element and the signal processor are only a few millimeters apart. The depth transducer signal is processed directly inside the sensor itself. All you need to receive depth and temperature data is a single ccable to a compatible device or display. Because the ceramic is angled inside the housing, the transducer beam is aimed downward, resulting in strong bottom echo returns and accurate depth readings. Retractable housing with self-closing valve reduces water flow into the container when the transducer is removed for cleaning.

Smart Sensor Features

Improved depth performance
Maximum depth range: 180M (594')
Minimum range 0.5M (1, 6')
Urethane face provides better sensitivity
Excellent high-speed performance
Fixed tilt of 20 ° for a tilt of 16° to 24°
Fixed Tilt of 12° for an elevation of 8° to 15°
Fixed tilt of 0° for an elevation of 0° to 8°
NMEA 2000 output
Power 100 W RMS
Frequency: 235 kHz
Cone: 12°
All models have depth and temperature
235 kHz eliminates interference with fishfinders
Retractable insert makes maintenance easier
Usable shaft length: 57 mm (2.25")
0.6M (19.8') NMEA 2000 Devicenet Cable and Connector
51mm (2") housing
Shutter plug included
Fits a maximum shell thickness of 54 mm (2-1/8")
Accepts minimum shell thickness 0.25" (6.3mm)

Airmar DT812BV-235-N2 235kHz Slim Angled Element IntelligentSensor ¢ 12° Angled Bronze NMEA 2000 Airmar applied its mature inclined element and high flow technology to its leading...

Airmar DT812BV-235-N2 Tilted Element 235 kHz Smart Sensor Tilt 12° Bronze NMEA 2000 Related ProductsSudbury Elastomeric Marine Sealant - 10 oz cartridge - White
Elastomeric marine sealantSudbury - 10 oz Cartridge - Black
Sudbury Elastomeric Marine Sealant - 10 oz Cartridge - Clear
3 oz (89 ml) Sudbury Elastomeric Sealant Tube - White
3 oz Sudbury Elastomeric Sealant Tube (89 ml) - Clear
Sudbury Elastometric Sealant Tube 3 oz (89 ml) - Black
BoatLIFE Life-Calk Tube Sealant – Non-Shrink – 2.8 FL. Oz - White
BoatLIFE Life-Calk Putty Tube - Non-Shrink - 2.8 FL. Oz - Black
BoatLIFE Life-Calk Putty Tube - Non-Shrink - 2.8 FL. Oz - Mahogany
BoatLIFE Life-Calk Cartridge - White

Frequently asked questions (FAQ) about the Airmar DT812BV-235- N2 Tilt Element 235 kHz Smart Sensor Tilt 12° Bronze NMEA 2000 Who is Airmar? How to describe the Airmar DT812BV-235-N2 Tilt Element 235 kHz Smart Sensor Tilt 12° Bronze NMEA 2000? What is the operating voltage of the product?
What is the rated power of the product?
What are the transducer functions of the product?
In which country is this product manufactured in?
What is the frequency band of the product?
What are the dimensions and the weight of Airmar DT812BV-235-N2 235 kHz Tilted Element Smart Sensor 12° Tilt Bronze NMEA 2000?
How long does the product last? (Feet)
What is the gauge of the product?
Is this product single or dual frequency?
Can this product read temperature?
How to assemble or what is the assembly Airmar Style DT812BV-235-N2 Tilt Element 235 kHz Smart Sensor Tilt 12° Bronze NMEA 2000?
What is the tilt angle of the product?
Where is the product commonly used?
br/> What is the display connector of the product?
What is the cable length?
What is the housing material of the product?
What is the communication method of the product?
What is the maximum depth of the product?
What ist the Deadrise product line?
What is the hole size of the product?
Does this product have an inclined element?
What shell material is suitable for this product?
br/> What is the usable shaft length of the product?
What is the maximum tilt angle of the product?
What is the maximum tilt angle of the product?
What are the manufacturer's ratings for Airmar DT812BV-235-N2 Tilt Element 235 kHz Smart Sensor Tilt 12° Bronze NMEA 2000?
Who is the Airmar? The right transducer improves the performance of any echo sounder, regardless of power level or price. From small jet ski sensors to large steel tank transducers, Airmar depth, speed and temperature sensors are the most responsive on the market. Airmar prides itself on the little extras added to products that make a big difference in performance and customer satisfaction. How to describe Airmar DT812BV-235-N2 Tilt Element 235 kHz Smart Sensor 12° Tilt Bronze NMEA 2000?

The DT800 uses Airmar's proven tilted element and broadband technologies in this intelligent depth and temperature sensor. The DT800 is a retractable, low-profile through-hull sensor that accurately calculates depth and temperature data and sends it to the NMEA 2000 network. Airmar smart sensors integrate microelectronics: the transducer element and the signal processor are only a few millimeters apart. The depth transducer signal is processed directly inside the sensor itself. All that is needed to receive depth and temperature data is a simple cable to a compatible network or display.

The ceramic is angled inside the housing, compensating for deadrise of the hull and directing the transducer beam downward. CThis results in strong echo returns and accurate depth readings. The DT800 comes with a choice of rugged housings – plastic, bronze or stainless steel – to suit any vessel type or hull material. These low profile housings do not affect hull performance and will give accurate readings at high speeds. The housing features a water valve that minimizes water entry into the boat when the retractable insert is removed and replaced with the blanking plug.

The DT800 is available in three models of inclined elements:

Fixed version inclined at 20° for hull angles from 16° to 24°
Fixed version inclined at 12° for hull angles from 8° to 15°
Fixed version tilted at 0° for hull angles from 0° to 7°

What is the operating voltage of the product? 9 to 16 VDC What is the power rating of the product? 100 WWhat is the transducer functions of the prodduct? Depth, temperatureIn which country is this product manufactured? USAWhat is the frequency band of the product? 235 kHzWhat is the Airmar DT812BV-235-N2 235 kHz Intelligent Tilt Element Sensor, 12° Tilt, Bronze, NMEA 2000 Package Dimensions and Weight? 9 (l) X 7 (h) X 14 (w) inches and the weight is: 3.6 lbs. What is the length of the product? (Feet) 100'What is the gauge of the product? 16/4 AwGIIs this product single or dual frequency? Conventional Single FrequencyThis product can read temperature? YesHow to mount or what is the mounting style of the Airmar DT812BV-235-N2 Tilted Element 235 kHz Smart Sensor 12° Tilt Bronze NMEA 2000? Low Profile Thru-HullWhat is the tilt angle of the product? 12°What is the common place of use of the product? Cruising/Racing, Leisure/Yachting, Fishing SailboatsWhat is the product display connector? N2 MicroWhat is the length of the cable? 6 m (20')What is theproduct housing material? BronzeWhat is the product's mode of communication? NMEA 2000What is the maximum depth of the product? NMEA 2000: 0.5 to 183 m (1.6 to 600')What is the Deadrise product line? 8° to 15°What is the hole size of the product? 51 mm (2")This product has an inclined element? YesWhich shell material is suitable for this product? Fiberglass or woodWhat is the usable shaft length of the product? 57mm (2.25")What is the maximum height of the product? Up to 24°What is the maximum tilt angle of the product? 24°What are the manufacturer's notes for the Airmar DT812BV-235-N2 Intelligent Tilt Element 235 kHz, 12° Tilt Bronze NMEA 2000 Sensor?

The DT800 uses Airmar's proven tilted element and broadband technologies in this intelligent depth and temperature sensor. The DT800 is a retractable, discreet through-hull sensor that accurately calculates prof datainverter and temperature and sends them to the NMEA 2000 network. Airmar smart sensors integrate microelectronics – the transducer element and the signal processor are only a few millimeters apart. The depth transducer signal is processed directly inside the sensor itself. All that is needed to receive depth and temperature data is a simple cable to a compatible network or display.

The ceramic is angled inside the housing, compensating for the dead state of the hull and directing the transducer beam downward. This results in strong echo returns and accurate depth readings. The DT800 comes with a choice of rugged housings – plastic, bronze or stainless steel – to suit any vessel type or hull material. These low profile housings do not affect hull performance and will give accurate readings at high speeds.The housing features a water valve that minimizes water entry into the boat when the retractable insert is removed and replaced with the blanking plug.

The DT800 is available in three models of inclined elements:

Fixed version inclined at 20° for hull angles from 16° to 24°
Fixed version inclined at 12° for hull angles from 8° to 15°
Fixed version inclined by 0° for hull angles from 0° to 7°

Save $119 when you purchase the Airmar DT812BV-235-N2 235 kHz Tilt Smart Sensor 12° Bronze NMEA 2000 for only $401 from NVN Marine! Same day dispatch before 3 p.m. Airmar DT812BV-235-N2 Tilt Element 235 kHz Smart Sensor Tilt 12° Bronze NMEA 2000 Technical Specifications

Type:	Marine Navigation & Instruments \| Transducers
Supplier:	Airmar
Weight:	3.8 lbs
Temperature:	Yes
Product Manual:	Download PDF
Product brochure:	Download PDF
Product installation:	Download PDF

Airmar DT812BV-235-N2 Tilt Element 235 kHz Smart Sensor 12° Tilt Bronze NMEA 2000 User ReviewAirmar DT812BV-235-N2 Tilt Element 235 kHz Smart Sensor 12° Tilt Bronze NMEA 2000 Shipping & Returns

Shipping Weight:	3.8 lb
Box sizes:	4.00 (h) x 8.00 (l) x 10.00 (l)
Cubic feet:	320.0
Returnable:	Yes

For more shipping policy details please view our policy of experienceedition and you can find our returns and refund policy here.