Airmar SS175C-0-HW 0d CHIRP High and Wide Tilt with 14-Pin Humminbird Marine Navigation & Instruments

Airmar SS175C-0-HW 0d Tilt

Wide and High CHIRP with Humminbird 14 Pin

Model: SS175C-0- HW

Fast response depth and water temperature sensor
1 kW with a maximum depth of 152 m (500')
High frequency: 150 kHz to 250 kHz = constant 25° beamwidth
100 kHz total bandwidth from a single transducer
Covers popular fishing frequency of 200 kHz plus everything else in the bandwidth
High frequency provides superior shallow water performance, bottom detail and target separation from fish
The High beam width provides greater coverage under the boat to detect fish in the upper water column
Low profile Through-hull housing provides good resolution at high speeds when installed correctly
Stainless steel housing for useon stepped, planing or displacement hulls made of fiberglass, wood or metal
Recommended boat size: Up to 11 m (36')
Also available in transom mount (TM185HW), in hull (M285HW) and bronze housing (B175HW)
Exclusive Xducer ID technology

Get more coverage under your boat thanks to Airmar's unique Chirp-ready wide-beam, high-frequency transducers. The high band operates over a frequency range of 150 to 250 kHz and has a fixed 25° beam for all frequencies. The high frequency band allows higher resolution. The constant wide beamwidth provides twice the coverage under the boat and excellent fish arches on display compared to most high frequency narrow beam transducer options.

The top wide is the ideal choice for inshore and pelagic fishing, where resolution and coverage maximals under the boat are essential up to 500'.

Tilted element transducers have the element fixed at an angle of 20°, 12° or 0° in the transducer housing. Because the transducer is installed almost flush with the hull, when the transducer is installed, the tilt corrects hull deadrise and orients the ceramic element horizontally to ensure maximum stability. The echo returns to the transducer .

Specifications

Model: SS175C-0-HW 1 kW fast response water depth and temperature sensor, maximum depth of 152 m(500') High frequency: 150 kHz to 250 kHz = constant 25° beamwidth 100 k-one transducer The total bandwidth of the device is Hz, covering the popular fishing frequency of 200 kHz-all others Bandwidth signals provide excellent shallow water performance, bottom detail and target separation from fish. The width of the driving lights provides greater coverage and can be used under the boat. The short column of water above the detected fish penetrates the hull. If installed correctly, it can provide good speed resolution. The stainless steel hull can be used for ladders, sliding or draining hulls made of fiberglass, wood or metal. Recommended hull size: up to 11 m (36'). Rear mount (TM185HW), hull (M285HW) and bronze hull (B175HW) models are also provided. Exclusive Xducer ID technology. The single beam sensorwide and high frequency Chirp-ready from Airmar can be used for you. The boat provides greater coverage. The high frequency band operates in the frequency range of 150 to 250 kHz and has a fixed 25° beam at all frequencies. The high frequency band provides excellent resolution. Compared to most high-frequency narrow beam transducer options, the constant wide beamwidth provides twice the under-vessel coverage and presents excellent fish arches on display. The height and width are ideal for offshore and offshore fishing. In the case of resolution as low as 500', resolution and maximum coverage are both crucial. The inclined element transducer has elements fixed in the transducer housing at an angle of 20°, 12° or 0°. Because the installation position of the transducer is almost flush with the hull, when the transducer is installed, the tilt phad to correct the blind spot of the hull and orient the ceramic element horizontally to ensure maximum return of the echo to the transducer. - Specific weight: heavy shell 2.7 kg (6 lbs) - Soundproof windows up to 24° - Polyurethane hole size 98 mm (3-7/8 inches)
PRODUCT ID: 1001678
SKU : NVN-1001678
CSKU: CWR-1001678
REWRITE: 1012789-airmar-ss175c-0-hw-0d-tilt-high-wide-chirp
MPN: AIRSS175C0HW14HB
UPC:
ASIN:
WSKU: AIRSS175C0HW14HB
SSKU:
NAME: Airmar SS175C-0-HW 0d Tilt High Wide CHIRP with Humminbird 14 pin
PTITLE: Airmar SS175C-0-HW 0d Tilt High Wide CHIRP with Humminbird 14 pin
TYPE: Navigation and Marine Instruments -> Transducers
SELLER: Airmar
Airmar SS175C-0- HW 0d Tilt High Wide Chirp with Humminbird 14-Pin

Gtags:

GSpecs:

Weight	2.7 kg (6 lb)
Deadrise shell	Up to 24°
Acoustic window	Urethane
Hole size	98 mm (3-7/8"")
An internal ceramic assembly

Airmar SS175C-0-HW 0d Tilt High Wide CHIRP with 14-pin Humminbird Product Description

Airmar SS175C-0-HW 0d Tilt

High Wide CHIRP with Humminbird 14 pin

Model: SS175C-0-HW

Fast response depth and water temperature sensor
1 kW with a maximum depth of 152 m (500')
High frequency: 150 kHz to 250 kHz = constant 25° beamwidth
100 kHz total bandwidth from 'one transducer
Covers the popular fishing frequency of 200 kHz plus everything else in the bandwidth.
High frequency provides superior shallow water performance, details bottom and target separation from fish
High beam width provides greater coverage under the boat. for detecting fish in the upper water column
Low profile through-hull housing provides good resolution at high speeds when usedt installed properly
Stainless steel housing for use on stepped, planing or displacement hulls made of fiberglass, wood or metal
Recommended boat size: Up to 11m(36')
Also available in transom mounted (TM185HW), in-hull (M285HW) and bronze housing (B175HW) models
Exclusive Xducer technology ID

Get more coverage under your boat with Airmar's unique Chirp-ready, wide-beam, high-frequency transducers. The high band operates over a frequency range of 150 to 250 kHz and has a fixed 25° beam for all frequencies. The high frequency band allows higher resolution. The consistent wide beamwidth provides twice the coverage under the boat and excellent fish arches on display compared to most high frequency narrow beam transducer options.

The wide top is the ideal choice for inshore and pelagic fishing, where resolution and maximum coverage under the boat are essential up to 500'.

The inclined element transducers have the element fixed at an angle of 20°, 12° or 0° in the transducer housing. Since the transducer is installed almost flush with the hull, when the transducer is installed, the tilt correction tilts to the hull and orients the ceramic element horizontally to ensure maximum echo returns to the transducer. /p>Specifications

Model: SS175C-0-HW fast response depth and water temperature sensor 1 kW, maximum depth of 152 m (500') High frequency: 150 kHz to 250 kHz = constant 25° beamwidth 100 k-transducer one The total bandwidth of the device is Hz, covering the popular fishing frequency of 200 kHz - all other bandwidth signals provide excellent water performance, bottom detail and target separation from Pisces. The width of the driving lights provides greater coverage and can be used on the boat. The short column of water above the detected fish penetrates the hull. If installed correctly, it can provide good speed resolution. The stainless steel hull can be used for ladders, sliding or draining hulls made of fiberglass, wood or metal. Recommended hull size: up to 11 m (36'). Rear-mount (TM185HW), shell (M285HW) and shell modelsin bronze (B175HW) are also supplied. Exclusive Xducer ID technology. Airmar's unique Chirp-ready high-frequency wide beam sensor can be used for you. The boat provides greater coverage. The high frequency band operates in the frequency range of 150 to 250 kHz and has a fixed 25° beam at all frequencies. The high frequency band provides excellent resolution. Compared to most high-frequency narrow beam transducer options, the constant wide beamwidth provides twice the under-vessel coverage and presents excellent fish arches on display. The height and width are ideal for offshore and offshore fishing. In the case of as low as 500', resolution and maximum coverage are both crucial. The inclined element transducer has elements fixed into the transducer housing at an angle of 20°, 12° or 0°. Because the installation position of thetransducer is almost flush with the hull, when the transducer is installed, the tilt can correct the dead angle of the hull and orient the ceramic element horizontally to ensure the maximum echo return to the transducer. - Specific weight: heavy shell of 2.7 kg (6 lbs) - Soundproof windows up to 24° - Polyurethane hole size 98 mm (3-7/8 inches)

Frequently asked questions (FAQ) About the Airmar SS175C-0-HW 0d Tilt High Wide CHIRP with Humminbird 14 pin Who is the Airmar?
How to describe the Airmar SS175C-0-HW 0d Tilt High Wide CHIRP with Humminbird 14 pin?
What is the hole? product size?
Who is Airmar? The right transducer improves the performance of any echo sounder, regardless of power level or price. From small jet ski sensors to large steel tank transducers, Airmardepth, speed and temperature sensors are the most responsive on the market. Airmartakes pride in the little extras added to products that make a big difference in performance and customer satisfaction. How to describe Airmar SS175C-0-HW 0d Tilt High Wide CHIRP with Humminbird 14 pin? Model: SS175C-0-HW fast response water depth and temperature sensor 1 kW, maximum depth of 152 m (500') High frequency: 150 kHz to 250 kHz = constant 25° beamwidth Transducer 100 k-one The device's total bandwidth is Hz, covering the popular fishing frequency of 200 kHz. All other signals in the bandwidth provide excellent shallow water performance, bottom detail and target separation from fish. The width of the driving lights provides greater coverage and can be used under the boat. The short column of water above the detected fish penetrates the hull. If installed correctly, it can provide good speed resolution. The hullstainless steel can be used for ladders, sliding or draining hulls made of fiberglass, wood or metal. Recommended hull size: up to 11 m (36'). Rear mount (TM185HW), hull (M285HW) and bronze hull (B175HW) models are also provided. Exclusive Xducer ID technology. Airmar's unique Chirp-ready high frequency wide beam sensor can be used for you. The boat provides greater coverage. The high frequency band operates in the frequency range of 150 to 250 kHz and has a fixed 25° beam at all frequencies. The high frequency band provides excellent resolution. Compared to most high-frequency narrow beam transducer options, the constant wide beamwidth provides twice the under-vessel coverage and presents excellent fish arches on display. The height and width are ideal for offshore and offshore fishing. In theIn the case of resolution as low as 500', resolution and maximum coverage are both crucial. The inclined element transducer has elements fixed into the transducer housing at an angle of 20°, 12° or 0°. Because the instThe alignment position of the transducer is almost flush with the hull, when the transducer is installed, the tilt helps correct the dead angle of the hull and orients the ceramic element horizontally to ensure the maximum return of the echo to the transducer. - Specific weight: heavy hull of 2.7 kg (6 lbs) - Soundproof windows up to 24° - Polyurethane hole size 98 mm (3-7/8 inches)

The Airmar SS175C-0 -HW is a 0D wide and tilt chirper with 14 pin Humminbird model.
With a fast response depth and water temperature sensor, 1 kW, depth maximum range of 152 m (500') and high frequency of 150 kHz to 250 kHz, this fish finder is perfect for all yourneeds.

4-inch (10.2 cm) high-resolution LCD display
DualBeam Sonar PLUS and CHIRP
Integrated GPS and automatic chart plotting
Waterproof depth sensor and fast response water temperature sensor

The Airmar SS175C-0 -HW CHIRP high tilt and wide 0d with 14-pin Humminbird model: SS175C-0-HWDepth and f1 kW ast response water temperature sensor with a maximum depth of 152 m (500') High frequency: 150 kHz at 250 kHz = Constant 25& 176; 100kHz beam width is the best choice for fishing enthusiasts who want to

What is the hole size of the product? 98 mm (3-7/8")

The Airmar SS175C-0-HW is a wide, 0d tilt chirp with a 14-pin Humminbird pattern.
With a depth and a fast response water temperature sensor, 1 kW, maximum depth of 152 m (500') and high frequency of 150 kHz to 250 kHz, this detectorfish monitor is perfect for all your needs.
4 inch (10.2 cm) high resolution LCD screen
DualBeam PLUS sonar and CHIRP
GPS and plotting Integrated Chart Automation
Waterproof Depth Sensor and Fast Response Water Temperature Sensor
Airmar SS175C-0-HW 0d Tilt High Wide CHIRP with 14-Pin Humminbird Model: SS175C-0-HW
1 kW fast response depth and water temperature sensor with a maximum depth of 152 m (500')
High frequency: 150 kHz at 250 kHz = Constant 25 & 176; 100 kHz beamwidth
High-resolution sonar.
Wide beamwidth.
Fast-response water temperature sensor with depth of up to 'at 500 feet.

Save $820when you purchase the Airmar SS175C-0-HW 0d Tilt High Wide CHIRP with Humminbird 14 Pinfor only $1,269from NVN Marine! Free same day delivery before 3pmh. Airmar SS175C-0-HW 0d CHIRP High and Wide Tilt with Humminbird 14 Pin Technical Specifications

Weight	2.7 kg (6 lb)
Deadrise Shell	Up to 24°
Acoustic window	Urethane
Hole size	98 mm (3-7/8"")
An internal ceramic assembly
Type:	Marine Navigation & Instruments \| Transducers
Supplier:	Airmar
Weight:	11.0 lbs

Airmar SS175C-0-HW 0d high and wide tilt CHIRP with Humminbird 14 Pin User ReviewsAirmar SS175C-0-HW 0d Tilt High Wide CHIRP with Humminbird14 Pin Shipping & Return

Shipping Weight:	11.0 lb
Box sizes:	1.00 (h) x 1.00 (w) x 1.00 (l)
Cubic feet:	1.0
Returnable:	Yes
USPS First Class:	Yes
P65:	Yes

To know the shipping conditionsition, please see our shipping policy and you can find our return and refund policy here.