Analytic Systems 2-Bank 40A AC Charger 24V Output 110V AC Input CSA/UL Electrical

2 Bank 40A AC Charger, 24V Output, 110VAC Input CSA/UL

This BCA1000 COTS AC source battery charger is designed to charge a battery at 24V DC.

Internally, the single-board design incorporates proven switching mode technology for unmatched efficiency and ultra-quiet operation. Additional stages of filtering. on the outputs reduce conducted and radiated EMI noise to very low levels.

This unit features a user selectable 2 or 3 stage charging profile, and the output voltage adjusts for optimal charging. Additionally, equalization mode and voltage temperature compensation increase the life of expensive battery systems.

Built for rugged use, this unit is built. Made from heavy duty anodized extruded billet aluminum with O-rings and all stainless steel fastenersThe.

Reliability features of this product line include LED status indicators, overheat shutdown, current limiting, reverse polarity battery, full connection protection, shutdown output short circuit protection with automatic recovery and output overvoltage protection.

Features:

Adjustable charging voltage
Single or dual pad charging
Ultra-quiet, low EMI operation
Bright LED indicators
Equalizer mode functionality
Robust and reliable

Specifications:

Input:

Rated voltage: 110 VAC
Actual voltage: 90-133 VAC
Frequency: 45-65
Input amps (maximum): 13 A
Input fuse (slow blow): MDA-20

Output:

Nominal voltage: 24 VDC
Floating voltage : 27.2 VDC
Absorption voltage: 28.8 VDC
Load amps: 40 A
Output fuses (parallel): 2x ATC - 30
Sinking to float switch: 6 A
Output overvoltage protection: 32 ± 1 V
Temperature compensation: -60 mV/°C
Equalization voltage: 31.0 VDC
Recommended Completed battery size (amp-hours): 160-240
Number supported. of Battery Banks: Charges up to two connected battery banks
Output Volt. Adjust: +/- 1.0 V
Charging stages (selectable): 2 stages (CC-Float) or 3 stages (CC-Absorption-Float), user selectable
Output Ripple & Noise: <50 mV
Transient Response: <1 V for 50% overvoltage
Regulation (line and load): <+/- 0 .5%
Service Cycle: Continuous (100% for 24 hours per day)
Efficiency:>75% at maximum output

Mechanics:

Length: 14.5 in / 36.8 cm
Width: 9.9 in / 25.1 cm
Height: 5.0 in / 12.7 cm
Clearance: 1.0 in / 2.5 cm all around
Weight: 12. 0 lb / 5.5 kg (approximately)
Material and finish: Black anodized marine grade aluminum
Fasteners: 18-8 stainless steel
Connection Input: 3m / 9.8ft 3xAWG14 power cord with NEMA 5-15 or CEE 7/VII compatible plug
Output Connection: 4-pin Molex BEAU terminal Strip
>Battery temperature sensor connection: RJ45 "phone jack" connector

Environment and safety:

Battery temperature operation: -25°C to +40°C at maximum output. Linear derating of 2.5% per °C from +40°C
Storage temperature: -40°C to +100°C
Humidity: 0 to 95% relative humidity (non-condensing) with standard conforming covering
Insulation: entre-output and input box: 1500 VDC; Output box: 500 VDC (1500 VDC at 48 V output)
Cooling: Two interior thermostatic cooling fans
Audible noise: 0 dB at 1 meter when fan is operating
Typical life:> 10 years (87,600 hours)
Warranty: Three years on parts and labor
Safety: engineered to meet UL458 and CSA 22.2.107.1 standards

This product cannot be returned to the original point of purchase. Please contact the manufacturer directly with any problems or concerns.

PRODUCT ID: 104279
SKU: NVN-104279
CSKU: CWR-104279
REWRITE : 115390-analytic-systems-ac-charger-2-bank-40a-24v
MPN: BCA1000-110-24
UPC:
ASIN:
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: ANALYTICAL SYSTEMS AC CHARGER 2-BANK 40A 24V OUTPUT 110VAC IN
EX_NAME:
PTITLE: AC ChargerAnalytical Systems Kit 2 Banks 40 A, 24 V Output, 110 V AC Input CSA/UL
TYPE: Electric | Battery Chargers
SELLER: Analytic Systems
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> WATERCRAFT PARTS & ACCESSORIES

Gtags:

GSpecs:

Analytic Systems 2 Bank 40 Amp AC Charger, 24 V Output, 110 V AC Input CSA/UL Product Description

2 Bank 40 Amp AC Charger, 24 V Output, 110 V AC Input CSA/UL

This BCA1000 COTS AC source battery charger is designed to charge a battery at 24V DC.

Internally, single board design incorporates proven switching mode technology for unmatched efficiency. and ultra-quiet operation. Additional stages of filtering on the outputs reduce conducted and radiated EMI noise to very low levels.

This unit features a user-selectable 2 or 3 stage charging profile, and the Output voltage adjusts for optimal charging. . Additionally, equalization mode and voltage temperature compensation increase the life of expensive battery systems.

Built for rugged use, this unit is constructed from extruded aluminumHeavy-duty anodized and machined from billet with O-rings and all stainless steel fasteners.

Reliability features of this product line include LED status indicators, overheat shutdown, power limitation current, reverse polarity battery connection protection, output short circuit shutdown with automatic recovery and output overvoltage protection.

Features:

Adjustable charging voltage
Charging on one or two banks
Ultra quiet, low EMI operation
Bright LED indicators
Equalizer mode functionality
Robust and reliable

Specifications:

Input :

Rated voltage: 110 VAC
Actual voltage: 90-133 VAC
Frequency: 45-65
Input Amps (Maximum): 13 A
Input Fuse (Slow Blow): MDA-20

Output:

Rated voltage: 24 VDC
Floating voltage: 27.2 VDC
Absorption voltage: 28.8 VDC
Load current: 40 A
Output fuses (parallel): 2x ATC-30
Sinking to float switch: 6 A
Output overvoltage protection: 32 ± 1 V
Temperature compensation: -60 mV/°C
Equalization voltage: 31 .0 VDC
Recommended battery size (amp-hours): 160-240
Supported number. of Battery Banks: Charges up to two connected battery banks
Output Volt. Adjust: +/- 1.0 V
Charging stages (selectable): 2 stages (CC-Float) or 3 stages (CC-Absorption-Float), user selectable
Output Ripple & Noise: <50 mV
Transient Response: <1 V for 50% overvoltage
Regulation (line and load): <+/- 0 .5%
Service Cycle: Continuous (100% duringt 24 hours per day)
Efficiency:>75% at maximum output

Mechanical:

Length: 14.5 in / 36.8 cm
Width: 9.9 in / 25.1 cm
Height: 5.0 in / 12.7 cm
Clearance: 1.0 in / 2.5 cm all around
Weight: 12.0 lb / 5.5 kg (approx.)
Material and finish : Black anodized marine grade aluminum
Mountings: 18-8 stainless steel
Input connection: 3 m / 9.8 ft 3xAWG14 in. Power cord with NEMA 5 compatible plug -15 or CEE 7/VII
Output connection: 4-pin Molex BEAU terminal block
Battery temperature sensor connection: RJ45 "telephone jack" connector

Environment and safety:

Operating temperature: -25°C to +40°C at maximum output. Linear derating of 2.5% per °C from +40°C
Storage temperature: -40°C to +100°C
Humidity: 0 to 95% relative humidity(non-condensing) with standard conformal coating
Isolation: input-output and input box: 1500 VDC; Output box: 500 VDC (1500 VDC at 48 V output)
Cooling: Two interior thermostatic cooling fans
Audible noise: 0 dB at 1 meter when fan is operating
Typical life:> 10 years (87,600 hours)
Warranty: Three years on parts and labor
Safety: engineered to meet UL458 and CSA 22.2.107.1 standards

This product cannot be returned to the original point of purchase. Please contact the manufacturerectly with any issues or concerns.

Save $177 when you purchase the Analytic Systems 2 AC Charger 40A Banks, 24V Output, 110V AC in CSA/ULfor only $1,179 from NVN Marine! Free same day delivery before 3 p.m. Analytic Systems AC charger 2 banks 40 A, outlet24V tie, 110V AC input CSA/UL Technical Specifications

Type:	Electric \| Battery Chargers
Supplier:	Analysis Systems
Charging banks:	2
Product brochure:	Download PDF

Analytic Systems 2 Bank 40A AC Charger, 24V Output, 110V AC Input User Reviews CSA/ULAnalytic Systems AC Charger 2 banks 40 A, 24 V output, 110 V AC In CSA/UL Shipping and Return

For detailed shipping policy, please see our Shipping Policy and you will find our Return and Refund policy here.