Sale!

Ancor 12-10 Gauge - #8 Heat Shrink Ring Terminal - 3 Pack

$1

SKU: Ancor 12-10 Gauge - #8 Heat Shrink Ring Terminal - 3 Pack
Category:

Ancor 12-10 Gauge - #8 Heat Shrink Ring Terminal - 3 Pack Electrical

Ancor heat shrink connectors offer heat activated adhesive built into the heat shrink sleeve. When heated, these connectors form a watertight seal and provide ultimate vibration and stress relief.

Ancor 312203 Attributes
  • Type: #8 Ring Terminalli>
  • Wire Gauge: 12-10 Gauge
  • Color: Silver End with Yellow Boot
  • Material: Copper
  • Quantity: Pack of 3
Ancor 312203 Features and Benefits
  • Tin plated for corrosion resistance
  • Pure copper for maximum current flow
  • Brazed seam for maximum strength
  • Heat activated adhesive embedded in the sleeve of the heat shrink tubing
  • Shrinks to form a watertight seal and ultimate relief from vibration and stress
  • No Supplier Warranty
Ancor Technical Bulletins 312203
  • 313938-9193.pdf

12-10 Gauge - #8 Heat Shrink Ring Terminal - Pack of 3

Gauge Size: 12-10
Screw Size: #8
Quantity: 3

Product Features:
  • Cross-linked polyolefin tubing is much stronger than PVC tubing and does not burn like PVC.
  • The heat-activated adhesive liner heat provides impervious seal to salt water, oil, acids and sunlight, as well as strain relief.
  • Nylon insulation, preferred by the experts, for marine-grade resistance to sunlight, water, oil, chemicals, vibration and cut damage.
  • Listed UL and CSA recognized
  • Highest shrink rate - shrinks to 1/3 of original size.
  • Shrinks to 257 degrees. F/125 degrees. C.
  • Operating temperature rangeheating 40°C. C at 110 degrees. C.
  • ANCOR heat shrink connectors offer heat activated adhesive embedded in the heat shrink tubing sleeve
  • Shrinks to form a watertight seal water and ultimate vibration and strain relief.
  • Tin plated for corrosion resistance.
  • Pure copper for maximum current flow.
  • Brazed seam for maximum strength.
  • Thread range: 12-10
  • mm: 3-5
  • This product can expose you to chemicals including di(2-ethylhexyl) phthalate (dehp), known to the State of California to cause cancer, birth defects or other reproductive problems. For more information,



    The Ancor heat shrink ring terminal has a heat activated adhesive embedded in the heat shrink sleeve. DuringWhen heated to 275°F (135°C), the connector shrinks to...
    PRODUCT ID: 55435
    SKU: NVN-55435
    CSKU: CWR-55435
    REWRITE: 66546-ancor-12-10-gauge-8-heat-shrink
    MPN: 312203
    UPC: 091887316025
    ASIN: B000NHZYJC
    WSKU:
    SSKU:
    KSKU: A4V312203
    GSKU:
    MSKU: 1-312203
    LSKU: 639-312203
    NAME: Ancor caliber 12-10 - #8 Heat Shrink Ring Terminal - Pack of 3
    NAME_EX: ANCOR 12- 10 #8 HEAT SHRINK RING TERMINAL 3PK
    PTITLE: Ancor 12-10 Gauge - #8 Heat Shrink Ring Terminal - Pack of 3
    TYPE: Electric | Terminals
    SELLER: Ancor
    VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> POWERWATER PARTS & ACCESSORIES

    Ancor Heat Shrink Ring Terminals
    Google Title : Ancor 12-10 Gauge - Heat Shrink Ring Terminal #8 - Pack of 3

    Gtags:
    Ancor

    GSpecs:

Ancor 12-10 Gauge - #8 Heat Shrink Ring Terminal - Pack of 3 Product Description

Ancor heat shrink connectors offer heat activated adhesive embedded in the heat shrink sleeve. When heated, these connectors form a watertight seal and provide ultimate relief from vibration and stress.

Ancor 312203 Attributes
  • Type: #8 Ring Terminal
  • Gauge Wire: 12-10 Gauge
  • Color: Silver end with yellow boot
  • Material: Copper
  • Quantity: Pack of 3
Ancor 312203 Features and Benefits
  • Tin plated for resistance to corrosion
  • Pure copper for maximum current flow
  • Brazed seam for maximum strength
  • Heat activated adhesive integrated intoHeat shrink tubing sleeve
  • Shrinks to form a watertight seal and ultimate vibration and tension Relief
  • No Vendor Warranty
Bulletins Ancor Technical 312203
  • 313938-9193.pdf

12-10 Gauge - #8 Heat Shrink Ring Terminal - Pack of 3

Gauge Size: 12-10
Screw Size: #8
Quantity: 3

Product Features:
  • Cross-linked polyolefin tubing is much stronger than PVC tubing and does not burn like PVC.
  • Heat activated adhesive liner provides waterproof seal against salt water, oil, acids and sunlight, as well as strain relief.
  • Nylon insulation, preferred by experts, for marine quality. resistance to sunlight, water, oil, chemicals, vibration and damage caused byar cuts.
  • UL Listed and CSA Recognized
  • Highest shrinkage rate - shrinks to 1/3 original size.
  • Shrinks to 257 degrees. F/125 degrees. C.
  • Operating temperature range 40°C. C at 110 degrees. C.
  • ANCOR heat shrink connectors offer heat activated adhesive embedded in the heat shrink sleeve.g
  • Shrinks to form a waterproof seal water resistant and ultimate relief from vibration and stress.
  • Tin plated for corrosion resistance.
  • Pure copper for maximum current flow .
  • Brazed seam for maximum strength.
  • Thread range: 12-10
  • mm: 3-5
  • This product can expose you to chemicals including di(2-ethylhexyl) phthalate (dehp), known to the State of California to cause cancer . , malformations congenital or other reproductive disorders. For more information,



    The Ancor heat shrink ring terminal has a heat activated adhesive embedded in the heat shrink sleeve. When heated to 275°F (135°C), the connector shrinks to...

    Frequently Asked Questions (FAQ) about Ancor 12-10 Gauge - Heat Shrink Ring Terminal #8 - 3-Pack Who is Ancor?
    How to describe Ancor 12-10 Gauge - Heat Shrink Ring Terminal #8 - 3-Pack?
    What is the product type?
    What is the material of Ancor 12-10 Gauge - #8 Heat Shrink Ring Terminal - Pack of 3?
    What is the gauge of the product?
    What is the weight of the product?
    What color is the Ancor 12-10 Gauge - #8 Heat Shrink Ring Terminal - 3 Pack?
    What is the post size of the product?
    Who is the Ancor? Ancorwas founded over 20 years ago to resouder the electrical problems encountered by sailors when they ventured offshore in large numbers. General purpose wires and components designed for shore applications have caused significant problems as electrical systems have become more sophisticated and demanding. How to describe Ancor 12-10 Gauge - #8 Heat Shrink Ring Terminal - 3 Pack? The Ancorheat shrink ring terminal has a heat activated adhesive embedded in the heat shrink sleeve. When heated to 275°F (135°C), the connector shrinks to... What is the product type? #8 Ring Terminal What is the material of the Ancor 12-10 Gauge - #8Heat Shrink Ring Terminal - Pack of 3? CopperWhat is the gauge of the product? 12-10 AWGWhat is the weight of the product? 1What is the color of the Ancor 12-10 Gauge Heat Shrink Ring Terminal - #8 - Pack of 3? YellowWhat is the size of the product? #8

    Save $2when you purchase the Ancor 12-10 Gauge - #8 Heat Shrink Ring Terminal - 3 Packfor only $2from NVN Marine! Same day dispatch before 3 p.m. Ancor 12-10 Gauge - #8 Heat Shrink Ring Terminal - 3 Pack Technical Specifications
    Type:

    Electric | Terminals

    Supplier:

    Ancor

    Weight:

    0.1 lbs

    Heat shrink:

    Yes

    Type:

    Ring terminals

    Size of post:

    #8

    Quantity per package:

    3

    Gauge:

    12-10 AWG

    Guide User Information:

    Download PDF

    Ancor 12-10 Gauge - Heat Shrink Ring Terminal # 8 - Pack of 3

    0.1 lb

    Box sizes:

    1.00 (h) x 1.00 (w) x 1.00 (l)

    Cubic feet:

    1.0

    Returnable:

    Yes

    USPS First Class:

    Yes

    P65:

    Yes

    For detailed shipping terms, please see our shipping policy and you can find our return and return policy refund here.