Sale!

Ancor 16-14 Heat Shrink Butt Connectors - Pack of 3

$1

SKU: Ancor 16-14 Heat Shrink Butt Connectors - Pack of 3
Category:

Ancor 16-14 Heat Shrink Butt Connectors - Pack of 3 Electrical

Ancor heat shrink connectors offer heat activated adhesive built into the heat shrink sleeve. When heated, these connectors form a watertight seal and provide ultimate vibration and stress relief.

Ancor 309103 Attributes
  • Type: Heat Shrink Step Down Butt
  • Wire Gauge: 16-14 Gauge
  • Color: Blue
  • Material: Copper
  • Quantity: Pack of 3
Ancor 309103 Features and Benefits
  • Tin plated for corrosion resistance
  • Pure copper for maximum current flow
  • Brazed seam for maximum strength
  • Heat activated adhesive embedded in heat shrink sleeve Tubing
  • Shrinks to form a watertight seal and ultimate relief from vibration and stress
  • >No Supplier Warranty
Ancor Technical Bulletins 309103
  • 313938 -9193.pdf

16-14 Heat Shrink Butt Connectors - Pack of 3

Gauge Size: 16- 14
Quantity: 3

Product Features:
  • Cross-linked polyolefin tubes are much stronger than standard tubes made of PVC and does not burn like PVC.
  • Heat activated adhesive liner provides impervious seal to salt water, oil, acids and sunlight . while providing strain relief.
  • Expert-preferred nylon insulation for marine-grade resistance to sunlight, water, oil, chemicals, vibration and cut damage.
  • UL Listed and CSA Recognized
  • Highest shrinkage rate: shrinks to 1/ 3 of original size.
  • Shrinks to 257 degrees. F/125 degrees. C.
  • Operating temperature range 40°C. C at 110 degreesés. C.
  • ANCOR heat shrink connectors offer heat activated adhesive embedded in the heat shrink tubing sleeve
  • Shrinks to form a watertight seal water and ultimate vibration and strain relief.
  • Tin plated for corrosion resistance.
  • Pure copper for maximum current flow.
  • Brazed seam for maximum current flow.
  • Brazed seam for maximum current flow.
  • resistance.
  • Wire range: 16-14
  • mm: 1-2
  • This product may expose you to to chemicals including di(2-ethylhexyl) phthalate (dehp) which is known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information,



    Heat activated adhesive liner can seal out salt water,oil, acid and sunlight, and relieve stress. Nylon insulators, the experts' first choice, used for...
    PRODUCT ID: 55426
    SKU: NVN-55426
    CSKU: CWR-55426
    REWRITE: 66537-ancor-16-14 - Pack of 3 heat shrink butt connectors
    MPN: 309103
    UPC: 091887307924
    ASIN: B00144DEPE
    WSKU:
    SSKU:
    KSKU: A4V309103
    GSKU:
    MSKU: 1-309103
    LSKU: 639-309103
    NAME: Ancor 16-14 Heat Shrink Butt Connectors - Pack of 3
    EX_NAME: ANCOR 16-14 Heat Shrink Butt CONNECTORS 3PK
    PTITLE: Ancor 16 -14 Heat Shrink Butt Connectors - Pack of 3
    TYPE: Electrical | Terminals
    SELLER: Ancor
    VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> POWERWATER PARTS & ACCESSORIES

    Ancor Heatshrink Butt Connect 16-16
    Title Google: Ancor 16-14 AWG Heat Shrink Butt Connector, Blue 3-Pack

    Gtags:
    Ancor

    GSpecs :

Ancor 16-14 Heat Shrink Butt Connectors - 3 Pack Product Description

Ancor heat shrink connectors offer heat activated adhesive embedded in the heat shrink tubing sleeve. When heated, these connectors form a watertight seal and provide ultimate relief from vibration and stress.

Ancor 309103 Attributes
  • Type: Heat Shrink Step Down End
  • Gauge Wire: 16-14 Gauge
  • Color: Blue
  • Material: Copper
  • Quantity: Pack of 3
Ancor 309103 Features and Benefits
  • Tin plated for corrosion resistance
  • Pure copper for maximum current flow
  • Solder seam for maximum strength
  • Heat activated adhesive embedded in gain sleevee heat shrink
  • Shrinks to form a watertight seal and ultimate relief from vibration and stress
  • li>
  • No supplier warranty
Ancor 309103 Technical Bulletins
  • 313938-9193.pdf

16-14 Heat Shrink Butt Connectors - Pack of 3

Gauge Size: 16-14
Quantity: 3

Product Features:
  • Cross bonded polyolefin tubing is much stronger than PVC tubing and does not burn like PVC.
  • Heat activated adhesive liner provides a waterproof seal salt water, oil, acids and sunlight while providing tension relief.
  • Nylon insulation, preferred by experts, for marine-grade resistance to sunlight, water, oil, chemicals, vibration and damage caused by cuts.
  • HomolUL listed and CSA Recognized
  • Highest shrinkage rate: shrinks to 1/3 of original size.
  • Shrinks to 257 degrees. F/125 degrees. C.
  • Operating temperature range 40°C. C at 110 degrees. C.
  • ANCOR heat shrink connectors offer heat activated adhesive embedded in the heat shrink sleeve
  • Shrinks to form a watertight seal water and ultimate relief from vibration and stress.
  • Tin plated for corrosion resistance.
  • Pure copper for maximum current flow.
  • Brazed seam for maximum strength.
  • Thread range: 16-14
  • mm: 1-2
  • This product can expose you to chemicals including di(2-ethylhexyl) phthalate (dehp), known to the State of California to cause cancer, congenital or other malformationsreproductive problems. For more information,



    Heat activated adhesive liner can seal out salt water, oil, acid and light sun, and relieve stress. Nylon Insulators, the experts' first choice, used for...

    Frequently Asked Questions (FAQ) about Ancor 16-14 Heat Shrink Butt Connectors - Pack of 3 Who is Ancor?
    How to describe Ancor 16-14 heat shrink butt connectors - pack of 3?
    What is the product type?
    What is the material of Ancor 16-14 heat shrink butt connectors - pack of 3?
    What is the gauge of the product?
    What is the weight of the product?
    What is the color of the Ancor 16-14 heat shrink butt connectors - Pack of 3?
    br/>Who is Ancor? Ancorwas founded over 20 years ago to solve electrical problems encountered by sailors whenthey ventured offshore in large numbers. General purpose wires and components designed for shore applications have caused significant problems as electrical systems have become more sophisticated and demanding. How to describe Ancor 16-14 Heat Shrink Butt Connectors - 3 Pack? The heat-activated adhesive liner can seal out salt water, oil, acid and sunlight and relieve stress. Nylon insulators, the experts' first choice, used for...What is the type of product? Heat Shrink Step Down Butt What is the material of Ancor 16-14 Heat Shrink Butt Connectors - Pack of 3? CopperWhat is the gauge of the product? 16-14 AWGWhat is the weight of the product? 0.003What is the color of Ancor 16-14 Heat Shrink Butt Connectors -Pack of 3? Blue

    Save $1on Ancor 16-1 Heat Shrink Butt Connectors4 - 3 Packfor only $2from NVN Marine! Same day dispatch before 3 p.m. Ancor 16-14 Heat Shrink Butt Connectors - 3 Pack Technical Specifications
    Type:

    Electrical | Terminals

    Supplier:

    Ancor

    Weight:

    0.1 lbs

    Type:

    Butt Connectors

    Quantity per package:

    3

    Heat Shrink:

    Yes

    Gauge:

    16-14 AWG

    User Guide:

    Download PDF

    Ancor 16- 14 Heat Shrink Butt Connectors - Pack of 3 User ReviewsAncor 16-14 Heat Shrink Butt Connector - Pack of 3 Shipping & Returns
    Weight d 'shipping:

    0.1 lb

    TaiBox sizes:

    1.00 (h) x 1.00 (w) x 1.00 (w)

    Cubic feet:

    1.0

    Returnable:

    Yes

    USPS First Class:

    Yes

    P65:

    Yes

    For detailed shipping terms, please see our shipping policy and you can find our return and refund policy here.