Sale!

ANDERSEN 34 ST FS - 2 speed Self-Tailing manual winch - Entirely in stainless steel

$133

SKU: ANDERSEN 34 ST FS - 2 speed Self-Tailing manual winch - Entirely in stainless steel
Category:

ANDERSEN 34 ST FS - 2 speed Self-Tailing manual winch - Entirely in stainless steel Sailing

34 ST FS - 2-Speed Self-Tailing Manual Winch - Fully Stainless Steel

If you pride yourself on having your yacht at its best, the fully automatic Winch ANDERSEN's stainless steel Tailing Winch creates the dock stop appeal you desire. It combines all the convenience and power of the ANDERSEN self-tailing winch with a great all-stainless steel look.

From top to bottom, the drive shaft stripper arm, jaws self-tailing, drum and upper and lower trim rings. are made from the highest quality 316 stainless steel and beautifully polished. The spectacular result is a highly reflective winch that becomes a highlight of the boat and a true reflection of your yachting pride. We like to say "Full Stainless – Beyond Good Looks".

Like all ANDERSEN™ winches, our fully stainless Self-Tailing winch features the exclusive Power Rib™ drum.stainless steel for maximum power and extended line. life. This model also uses our exclusive self-tailing feature which automatically adapts to Wi-Fi. A range of different line sizes.

Materials

Andersen winch drums are produced from grade 316L stainless steel, cold formed in stages during manufacturing to further increase strength. and the hardness when it takes its final form. The resulting construction is lightweight, yet rigid and inflexible. 

The drive shafts are made from grade 329 duplex stainless steel. The pawls are cut from a cold-pressed profile of grade 316 stainless steel and are virtually unbreakable. 

The upper center rods are made from aluminum bronze for ultimate durability. The combination of materials and design contributes to a lightweight and rigid final assembly that highlights. the mechanical efficiency of the hoisthe. Andersen winces are similar in weight to winches equipped with aluminum drums, but are much more durable. 

Power Rib™

ANDERSEN© winches are equipped with the Power Rib™. Unlike other winches with abrasive drum surfaces, ANDERSEN winch drums have vertical ribs rising up the surface. This, combined with the polished, smooth stainless steel, gives maximum grip and minimal rope wear, reducing the costs of replacing sheets and halyards. In addition, the Power Rib principle simply makes navigation more pleasant. Fewer turns on the winch make tacking easier. Leaves can be removed gently without harsh tearing and the risk of overhangs and stuck leaves is significantly reduced. The grip provided by the ribs will remain the same year after year, unlike many other winches that have an abrasive surface orsimilar to sandpaper. Such surfaces tend to wear on both the strings and themselves.

Power ratio

The power ratio is the mechanical advantage of the winch and is calculated as follows:

handle length x gear ratio

        drum radius

The pull of the winch is based on the power ratio and not just on the physical size of the winch. the winch or the diameter of the drum. The power ratio is used to determine the load that the winch can handle as follows: handle pull (kg x power ratio = winch pull (kg).

This means that by applying a 10kg load, using a standard 10" handle, on a 40:1 winch power ratio, the winch can pull 400kg, assuming the winch is 100% efficient, which does not is not possible in practice because the efficiency is reduced by mechanical friction lossesinternal e.

Features

The Anderson winch drums incorporate the distinctive Power Rib which ensures controlled grip on the line at all times, whether for adjustment or relaxation. The highly polished stainless steel surface minimizes vertical friction and allows the loaded cable to rotate. slide up easily as the drum rotates, without the shaking and excessive cable wear seen on winches that rely on a rough surface finish for grip.

Stainless steel roller and ball bearings support the highest drum loads toward the center. winch rod, minimizing efficiency losses due to friction. 

The auto-tail arm can be rotated 360 degrees for optimal positioning (40ST and above). Self-tailing stainless steel jaws automatically adjust to accommodate different rope sizes. 

Winchess Andersen are designed for simple, straightforward installation and maintenance. Maintenance is only required approximately every two years, under normal conditions of use. 

Specifications:

Drum Ø:70 mm (2-3/4")

Base Ø:125 mm(4-15/16")

Height:151 mm(5-15/16")

Line entry:65 mm(2-9/16")

Line size:8-14 mm( 1/8 - 11/16")

Weight;4.1 kg(9.0lbs)

1st gear gear ratio1.3:1

2nd gear gear ratio:4.7:1

1st gear power ratio:9.5:1

2nd gear power ratio:33.8:1



More importantly, the Power Rib principle makes navigation more pleasant Such a surface tends to wear out the rope and the rope itself.odel uses equal.ment our...
PRODUCT ID: 55004
SKU: NVN-55004
CSKU: CWR-55004
REWRITE: 66115-andersen-34-st-fs-2-speed-self -tailing
MPN: RA2034010000
UPC: 9316800528486
ASIN: B00QL5P7W4
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: ANDERSEN 34 ST FS - 2 speed Self-Tailing manual winch - Entirely in stainless steel
NAME_EX: ANDERSEN 34 SELF TAILING WINCH 2 SPEEDS FULL INOX
PTITRE: ANDERSEN 34 ST FS - 2 speeds Self-Tailing manual winch Tailing - Completely stainless steel
TYPE: Sailing | Winches
SELLER: ANDERSEN
SPORTING GOODS> OUTDOOR LEISURE> BOATING AND WATER SPORTS
Sports
Anderson Marine Andersen 34 ST FS - 2-Speed Self-Tailing Manual Winch - Fully Stainless Steel
ANDERSEN 34 ST FS - 2 Speed Self-TailingManual Winch - Fully Stainless Steel - RA2034010000
Amazon Category : Sports
Gtags:

GSpecs:

ANDERSEN 34 ST FS - Self-Tailing manual winch with 2 speeds - Completely in stainless steel Product description

34 ST FS - Self-Tailing manual winch with 2 speeds - Completely in stainless steel

If you pride yourself on having your yacht looking its best, ANDERSEN's fully stainless self-tailing winch creates the dock stopping appeal you desire. It combines all the convenience and power of the ANDERSEN self-tailing winch with a great all-stainless steel look.

From top to bottom, the drive shaft stripper arm, jaws self-tailing, drum and upper and lower trim rings. are made from the highest quality 316 stainless steel and beautifully polished. The spectacular result is a highly reflective winch that becomes a highlight of the boat and a true reflection of your yachting pride. We like to say "Full Stainless – Beyond Good Looks".

Like all winschs ANDERSEN™, our Self-Tailing Full Stainless winch features the exclusive Power Rib™ stainless steel drum for maximum power and extended life.in my life. This model also uses our exclusive self-tailing device which automatically adapts to a wide range of different line sizes.

Materials

The drums of Andersen winch are made from quality 316L stainless steel, cold formed in stages during manufacturing to further increase strength and hardness as it takes its final shape. The resulting construction is lightweight, yet rigid and inflexible. 

The drive shafts are made from grade 329 duplex stainless steel. The pawls are cut from a cold-pressed profile of grade 316 stainless steel and are virtually unbreakable. 

The upper center rods are made from aluminum bronze for ultimate durability. The combinationn materials and design contribute to a light and rigid final assembly that highlights. the mechanical efficiency of the winch. Andersen winces are similar in weight to winches equipped with aluminum drums, but are much more durable. 

Power Rib™

ANDERSEN© winches feature the Power Rib™. Unlike other winches with abrasive drum surfaces, the drums ANDERSEN winches have vertical ribs that run across the surface. This, combined with the polished, smooth stainless steel, gives maximum grip and minimal rope wear, reducing the costs of replacing sheets and halyards. In addition, the Power Rib principle simply makes navigation more pleasant. Fewer turns on the winch make tacking easier. Leaves can be removed gently without harsh tearing and the risk of overhangs and stuck leaves is significantly reduced. Adhesion assurede through the ribs will stay the same year after year, unlike many other winches that have an abrasive or sandpaper-like surface. Such surfaces tend to wear on both the strings and themselves.

Power ratio

The power ratio is the mechanical advantage of the winch and is calculated as follows:

handle length x gear ratio

        drum radius

The pull of the winch is based on the power ratio and not just on the physical size of the winch or the diameter of the drum. The power ratio is used to determine the load the winch can handle as follows: handle pull (kg x power ratio = winch pull (kg).

This means that by applying a 10kg load, using a standard 10" handle, on a Power Ratio 40:1 winch, the winch can pull 400kg, assuming the winch is efficient100%. This is not possible in practice because efficiency is reduced by internal mechanical friction losses.

Features

Anderson winch drums incorporate the distinctive Power Rib which ensures controlled grip on the line at all times, whether for tuning or easing. The highly polished stainless steel surface. minimizes vertical friction and allows loaded cable turns to slide easily upward as the drum rotates, without the shaking and excessive cable wear seen on winches that rely on a rough surface finish for grip. 

Stainless steel roller bearings and ball bearings support the highest drum loads according to CE inside the winch shaft, minimizing efficiency losses due to friction. 

The self tailing arm can be rotated 360 degrees for optimal positioning (40ST and above). Self-tailing stainless steel jaws automatically adjust to accommodate different rope sizes. 

Andersen winches are designed for simple, straightforward installation and maintenance. Maintenance is only required approximately every two years, under normal conditions of use. 

Specifications:

Drum Ø:70 mm (2-3/4")

Base Ø:125 mm(4-15/16")

Height:151 mm(5-15/16")

Line entry:65 mm(2-9/16")

Line size:8-14 mm( 1/8 - 11/16")

Weight;4.1 kg(9.0lbs)

1st gear gear ratio1.3:1

2nd gear gear ratio:4.7:1

1st gear power ratio:9.5:1

2nd gear power ratio:33.8:1



More importantStill, the Power Rib principle makes navigation more pleasant. Such a surface tends to wear out the rope and the rope itself. The model also uses our...

ANDERSEN 34 ST FS - 2 Speed Self-Tailing Manual Winch - Fully Stainless Steel Related ProductsRonstan Quick Lock Winch Handle - Single Handle - Length 200mm ( 8")
Ronstan Quick Lock Winch Handle - Single Handle - Length 250mm (10")
Ronstan Quick Lock Winch Handle - Palm Handle - Length 200mm (8")
Ronstan Quick Lock Winch Handle - Palm Grip - 250mm (10") Length


Frequently Asked Questions (FAQ) about ANDERSEN 34 ST FS - Manual Winch 2-Speed Self-Tailing - Fully Stainless Steel Who is ANDERSEN?
How to describe ANDERSEN 34 ST FS - 2-Speed Self-Tailing Manual Winch - Fully Stainless Steel?
What is the policy of guarantee for ANDERSEN 34 ST FS - 2 speed Self-Tailing manual winch - Entirely in stainless steel?
What is the type of the product?
What is the height of the product?
What is the weight of the product ?
What is the diameter of the product?
What is the activation method for ANDERSEN 34 ST FS - Self-Tailing 2 speed manual winch - Full Stainless steel?
Who is ANDERSEN? Beautifully stylish inside and out, ANDERSEN sailboat winches reflect the functional needs and aesthetic demands of premium sailboats around the world. Developed using cutting-edge production techniques carefully refined over more than 60 years, each ANDERSEN winch reflects a sincere commitment to delivering the most exceptional performance, from the highest quality winches to customers.How to describe ANDERSEN 34 ST FS - Self-Tailing 2-speed manual winch - completely stainless steel? More important incore, the Power Rib principle makes navigation more pleasant. Such a surface tends to wear out the rope and the rope itself. The model also uses our...
  • Extremely easy to use
  • Looks great on your boat
  • No need to worry about the winch sticking
  • All stainless steel construction and durable hardware will withstand the harshest marine environments.
  • Easily controlled with a simple turn of the knob, this winch is the perfect choice for any boat owner.
  • A two-speed option allows you to control how quickly you want your line to retract.
  • 34 ST FS - 2-speed Self-Tailing manual winch
  • Fully stainless steel
  • If you pride yourself on having your yacht at its best, The fully stainless Self-Tailing winch from ANDERSEN creates the dockside appeal you desire. It combines all the commodity and performance of a self-tailing winch with the elegant appearance of stainless steel.
What is the warranty policy for ANDERSEN 34 ST FS - 2-speed Self-Tailing manual winch - Completely stainless steel? Three years (original owner)
  • Extremely easy to use
  • Looks great on your boat
  • No need to worry about stuck thumb
  • All stainless steel construction and durable hardware will withstand the harshest marine environments.
  • Easily controlled with the turn of a button, this winch is the perfect choice for any boat owner.
  • A two-speed option lets you control how fast you want your line to come in.
  • 34 ST FS - 2-Speed Self-Tailing Hand Winch
  • Fully stainless steel
  • If you pride yourself on having your yacht at its best, the fully stainless steel self-tailing winchANDERSEN stainless steel creates the dock stop appeal you desire. It combines all the convenience and performance of a self-tailing winch with the elegant appearance of stainless steel.
What is the type of product? Above DeckHow high is the product? 5 15/16"What is the weight of the product? 9 PoundsWhat is the diameter of the product? 4 15/16"What is the activation method for ANDERSEN 34 ST FS - 2-Speed Self-Tailing ManualWinch - fully enclosure stainless steel? Manual

Save $119 on the purchase of the ANDERSEN 34 ST FS - 2-speed Self-Tailing manual winch - Entirely in stainless steel for only $1,079 from NVN Marine! Same day dispatch before 3 p.m. ANDERSEN 34 ST FS - Self-Tailing 2-speed manual winch - Fully stainless steel technical specifications
Type:

Sail | Winches

Supplier:

ANDERSEN

Weight:

9.0 lbs

Guide user:

Download PDF

ANDERSEN 34 ST FS - 2-speed Self-Tailing manual winch - Fully stainless steel User ReviewsANDERSEN 34 ST FS - 2 Speed Self-Tailing Manual Winch - Complete Stainless Steel Shipping & Returns
Shipping Weight:

9.0 lbs

Box sizes:

5.00 (h) x 6.00 ( l) x 7.00 (l)

Cubic feet:

210.0

Returnable:

Yes

For conditions detailed shipping policies, please review our Shipping Policy and you can find our Return and Refund Policy here.