ANDERSEN 46 ST FS - 2 speed Self-Tailing manual winch - Entirely in stainless steel Sailing
40 ST FS - 2-Speed Self-Tailing Manual Winch - Fully Stainless Steel
If you pride yourself on having your yacht at its best, the fully automatic Winch ANDERSEN's stainless steel Tailing Winch creates the dock stop appeal you desire. It combines all the convenience and power of the ANDERSEN self-tailing winch with a great all-stainless steel look.
From top to bottom, the drive shaft stripper arm, jaws self-tailing, drum and upper and lower trim rings. are made from the highest quality 316 stainless steel and beautifully polished. The spectacular result is a highly reflective winch that becomes a highlight of the boat and a true reflection of your yachting pride. We like to say "Full Stainless – Beyond Good Looks".
Like all ANDERSEN™ winches, our fully stainless Self-Tailing winch features the exclusive Power Rib™ drum.stainless steel for maximum power and extended line. life. This model also uses our exclusive self-tailing feature which automatically adapts to Wi-Fi. A range of different line sizes.
Materials
Andersen winch drums are produced from grade 316L stainless steel, cold formed in stages during manufacturing to further increase strength. and the hardness when it takes its final form. The resulting construction is lightweight, yet rigid and inflexible.
The drive shafts are made from grade 329 duplex stainless steel. The pawls are cut from a cold-pressed profile of grade 316 stainless steel and are virtually unbreakable.
The upper center rods are made from aluminum bronze for ultimate durability. The combination of materials and design contributes to a lightweight and rigid final assembly that highlights. the mechanical efficiency of the hoisthe. Andersen winces are similar in weight to winches equipped with aluminum drums, but are much more durable.
Power Rib™
ANDERSEN© winches are equipped with the Power Rib™. Unlike other winches with abrasive drum surfaces, ANDERSEN winch drums have vertical ribs rising up the surface. This, combined with the polished, smooth stainless steel, gives maximum grip and minimal rope wear, reducing the costs of replacing sheets and halyards. In addition, the Power Rib principle simply makes navigation more pleasant. Fewer turns on the winch make tacking easier. Leaves can be removed gently without harsh tearing and the risk of overhangs and stuck leaves is significantly reduced. The grip provided by the ribs will remain the same year after year, unlike many other winches that have an abrasive surface orsimilar to sandpaper. Such surfaces tend to wear on both the strings and themselves.
Power ratio
The power ratio is the mechanical advantage of the winch and is calculated as follows:
handle length x gear ratio
drum radius
Winch pull is based on power ratio and not just physical winch size or drum diameter. The power ratio is used to determine the load that the winch can handle is: handle pull (kg x power ratio = winch pull (kg).
This means that in applying a load of 10kg, using a standard 10" handle, on a 40:1 power ratio winch, the winch can pull 400kg, assuming the winch is 100% efficient, this which is not possible in practice because the efficiency is reduced by mechanical friction lossesinternal ues.
Characteristics.
Anderson winch drums incorporate the distinctive Power Rib which ensures controlled grip on the line at all times, whether adjusting or easing. The highly polished stainless steel surface minimizes vertical friction and allows cable loading. rotates to easily slide up as the drum rotates, without the shaking and excessive cable wear seen on winches that rely on a rough surface finish for grip.
Stainless steel roller and ball bearings support the highest drum loads for the winch center rod, minimizing efficiency losses due to friction.
The self tailingle arm can be rotated 360 degrees for optimal positioning (40ST and above). Self-tailing stainless steel jaws automatically adjust to accommodate different rope sizes.
Andersen winches are designed for simple, straightforward installation and maintenance. Maintenance is only required approximately every two years, under normal conditions of use.
Specifications:
Drum Ø:75 mm (3-1/2")
Base Ø:152 mm(7-1/16")
Height:174 mm(8-1/4")
Line entry:71 mm(3-9/16")
Line size:8-14 mm( 1/8 - 11/16")
Weight;4.9 kg(17.2lbs)
1st gear gear ratio2.8:1
2nd gear gear ratio:8.4:1
1st gear power ratio:15.7:1
2nd gear power ratio:47.1:1
It combines all the convenience and powerful functions Andersen self-winding winches with superb all-steel housingstainless.appearance.
PRODUCT ID: 55006
SKU: NVN-55006
CSKU: CWR-55006
REWRITE: 66117-andersen-46-st-fs-2-speed-self-tailing
MPN: RA2046010000
UPC: 9316800467778
ASIN: B00QL5PGYI
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: ANDERSEN 46 ST FS - Manual Self-Tailing Winch 2 Speeds - Completely Stainless Steel
NOM_EX: ANDERSEN 46 SELF TAILING WINCH 2 SPEEDS FULL INOX
PTITRE: ANDERSEN 46 ST FS - Manual Self-Tailing Winch 2 Speeds - Complete Stainless Steel
> TYPE: Sailing | Winches
SELLER: ANDERSEN
SPORTING GOODS> OUTDOOR RECREATION> BOATING & WATER SPORTS
Cordless
Andersen 46 ST FS Self-Tailing 2-Winch Winch gears - Full Stainless Steel
Andersen 46 St Fs 2Speed SelfTailing Manual Winch Full Stainless S by HodgesMarine
Cordless
Gtags:
GSpecs:
ANDERSEN 46 ST FS - 2-speed Self-Tailing manual winch - Completely in stainless steel Product description
40 ST FS - 2-speed Self-Tailing manual winch - Completely in stainless steel
If you pride yourself on having your yacht looking its best, ANDERSEN's fully stainless self-tailing winch creates the dock stopping appeal you desire. It combines all the convenience and power of the ANDERSEN self-tailing winch with a great all-stainless steel look.
From top to bottom, the drive shaft stripper arm, jaws self-tailing, drum and upper and lower trim rings. are made from the highest quality 316 stainless steel and beautifully polished. The spectacular result is a highly reflective winch that becomes a highlight of the boat and a true reflection of your yachting pride. We like to say "Full Stainless – Beyond Good Looks".
Like all winschs ANDERSEN™, our Self-Tailing Full Stainless winch features the exclusive Power Rib™ stainless steel drum for maximum power and extended life.in my life. This model also uses our exclusive self-tailing device which automatically adapts to a wide range of different line sizes.
Materials
The drums of Andersen winch are made from quality 316L stainless steel, cold formed in stages during manufacturing to further increase strength and hardness as it takes its final shape. The resulting construction is lightweight, yet rigid and inflexible.
The drive shafts are made from grade 329 duplex stainless steel. The pawls are cut from a cold-pressed profile of grade 316 stainless steel and are virtually unbreakable.
The upper center rods are made from aluminum bronze for ultimate durability. The combinationn materials and design contribute to a light and rigid final assembly that highlights. the mechanical efficiency of the winch. Andersen winces are similar in weight to winches equipped with aluminum drums, but are much more durable.
Power Rib™
ANDERSEN© winches feature the Power Rib™. Unlike other winches with abrasive drum surfaces, the drums ANDERSEN winches have vertical ribs that run across the surface. This, combined with the polished, smooth stainless steel, gives maximum grip and minimal rope wear, reducing the costs of replacing sheets and halyards. In addition, the Power Rib principle simply makes navigation more pleasant. Fewer turns on the winch make tacking easier. Leaves can be removed gently without harsh tearing and the risk of overhangs and stuck leaves is significantly reduced. Adhesion assurede through the ribs will stay the same year after year, unlike many other winches that have an abrasive or sandpaper-like surface. Such surfaces tend to wear on both the strings and themselves.
Power ratio
The power ratio is the mechanical advantage of the winch and is calculated as follows:
handle length x gear ratio
drum radius
Winch pull is based on power ratio and not just the physical size of the winch or drum diameter. The power ratio is used to determine the load the winch can handle as follows: handle pull (kg x power ratio = winch pull (kg).
This means that by applying a 10kg load, using a standard 10" handle, on a Power Ratio 40:1 winch, the winch can pull 400kg, assuming the winch is efficientace 100%. This is not possible in practice because efficiency is reduced by internal mechanical friction losses.
Features
Anderson winch drums incorporate the distinctive Power Rib which ensures controlled grip on the line at all times, whether for tuning or easing. The highly polished stainless steel surface. minimizes vertical friction and allows loaded cable turns to slide easily upward as the drum rotates, without the shaking and excessive cable wear seen on winches that rely on a rough surface finish for grip.
Stainless steel roller bearings and ball bearings support the highest drum loads on the winch's center rod, minimizing efficiency losses due to friction.
The self tailing arm can be rotated 360 degrees for optimal positioning (40ST and above). THESelf-tailing stainless steel jaws automatically adjust to accommodate different rope sizes.
Andersen winches are designed for simple, straightforward installation and maintenance. Maintenance is only required approximately every two years, under normal conditions of use.
Specifications:
Drum Ø:75 mm (3-1/2")
Base Ø:152 mm(7-1/16")
Height:174 mm(8-1/4")
Line entry:71 mm(3-9/16")
Line size:8-14 mm( 1/8 - 11/16")
Weight;4.9 kg(17.2lbs)
1st gear gear ratio2.8:1
2nd gear gear ratio:8.4:1
1st gear power ratio:15.7:1
2nd gear power ratio:47.1:1
It combines all the conveniencesce and powerful functions of Andersen self-winding winches with a stunning all-stainless steel appearance.
ANDERSEN 46 ST FS - 2-speed Self-Tailing manual winch - Fully stainless steel Related productsRonstan Quick-Lock winch handle - Single handle - Length 200 mm (8")
Ronstan Quick-Lock Winch Handle - Single Handle - 250mm (10") Length
Ronstan Quick Lock Winch Handle - Palm Handle - 200mm (8") Length
Quick-Lock Winch Handle Ronstan quick lock - Palm handle - 250 mm (10") Length stainless steel Who is ANDERSEN?
How to describe ANDERSEN 46 ST FS - 2 Speed Self-Tailing Manual Winch - All Stainless Steel?
Who is ANDERSEN? Beautifully elegant inside and out, ANDE sailboat winchesRSENreflects the functional needs and aesthetic requirements of premium sailboats worldwide. Developed using state-of-the-art production techniques carefully refined over more than 60 years, each of ANDERSEN winches reflects a sincere dedication to providing customers with the most exceptional performance from the highest quality winches. How to describe ANDERSEN 46 ST FS - Self-Tailing 2 speed manual winch - Entirely in stainless steel? It combines all the convenience and powerful features of Andersen self-winding winches with a stunning all-stainless steel appearance.
- If you own a yacht and want it to look its best, this winch is perfect for you.
- It has a stainless steel finish that will make your boat stand out from the rest.
- The self-tailing function makes it easy to use and the 2 speeds allow different types of applications. .
- If you pride yourself on having your yacht looking its best, the ANDERSEN fully stainless self-tailing winch creates the appeal that it you need. desire.
- It combines all the convenience and reliability of a self-tailing winch with the beauty and durability of stainless steel.
- As for appearance, it's the only winch you can trust to always perform at its best.
- 40 ST FS - 2-Speed Self-Tailing Manual Winch - Fully Stainless Steel
- If you pride yourself on having your yacht looking its best, ANDERSEN' S Fully Stainless Self-Tailing Winch creates the dock stopping appeal you desire. It combines all the practical and safety features of a self tailing winch with the elegant lines of an all stainless steel design.
Save $169 when you buy the ANDERSEN 46 ST FS - Self-Tailing manual winch for 2Gears - Full Stainless Steelfor only $1,526 at NVN Marine! Free same day delivery before 3 p.m. ANDERSEN 46 ST FS - Self-Tailing 2-speed manual winch - Fully stainless steel technical specifications
| Type: | Sail | Winches |
|---|---|
| Supplier: | ANDERSEN |
| Weight: | 17.2 lbs |
| User Guide: | Download PDF |
| Product Manual: | Download PDF |
| Shipping weight: | 17.2 lbs |
|---|---|
| Sizes of boxes: | 8.00 (h) x 8.00 (w) x 9.00 (l) |
| Cubic feet: | 576.0 |
| Returnable: | Yes |
For detailed shipping terms , please review our shipping policy and you will find our return and refund policies.and here.
- ANDERSEN 46 ST BT - Self-Tailing 2-speed manual winch - Black trim
- FS ANDERSEN 40ST E1 electric winch - 24V
- FS ANDERSEN 40ST E1 electric winch - 12V
- ANDERSEN 40ST Compact FS electric winch under deck variable speed - 24 V
- FS compact electric winch under deck ANDERSEN 40ST variable speed 12 V
- ANDERSEN 40ST Compact Electric Above Deck Variable Speed FS Winch - 24V
- ANDERSEN 40ST Compact Electric Above Deck Variable Speed FS Winch - 12V
