Attwood Hood Fan Marine Hardware
Attwood hull mounted vents are designed to be bolt installed as a complete unit from inside or outside the hull. The vent pipe wraps around the bottom of the box to form a raised water barrier. Plastic vents are corrosion resistant and will not fade. All header boxes and vents are designed for intake or exhaust and meet ABYC H-2 cross section requirements.
Attwood Marine 1364A3 Attributes- Compatibility: Vent pipe supported by a 3 inch inside diameter wire
- Type: Hood
- Finish: Chrome
- Color: Silver
- Material: Zinc
- With Clips: Yes
- li>
- Includes a flexible hose clamp that is screwed onto the hose and then attached vent snaps onto flange
- Constructed of chrome-plated die-cast Perma-Plate ZAMAK
- Flange is non-corrosive plastic
- For use with 3 inch inside diameter metal-backed vent pipe
- 1-year limited warranty
- 69219-b-cowl-vent-1364a.pdf
- Attwood Warranty 2009.pdf
Hood Vent
Attwood hull mounted vents are designed to be installed by bracket as a complete unit from either inside or outside the hull. The vent hose (not included) wraps around the bottom of the box to form a raised water barrier. Plastic vents are corrosion resistant and will not fade. All header boxes and vents are designed for intake or exhaust and meet ABYC H-2 cross section requirements.
For use with metal-supported vent pipeallique 3" ID. Features a flexible pipe flange that screws onto the pipe. , then the vent snaps onto the flange. The vent made from chrome-plated die-cast Perma-Plate ZAMAK is plastic non-corrosive. Installs with #8 screws.
Installation hole size: 3-1" to 3-1/2"
The Attwood cape fan hull mounted vent is designed to be installed as a complete unit from inside or outside the hull by attaching Vent Hose (not included)...
PRODUCT ID. : 69878
SKU: NVN-69878
CSKU: CWR-69878
REWRITE: 80989-attwood-cowl-ventilator
MPN: 1364A3
UPC: 022697136497
ASIN: B0000AZ81O
WSKU:
SSKU:
KSKU: A7J1364A3
GSKU:
MSKU: ATT1364A3
LSKU: 23-1364A3
NAME: Attwood Hood Fan
NAME_EX: HOOD FAN ATTWOOD
PTITLE: Attwood Hood Ventilator
TYPE: Marine Hardware | Vents
SELLER: Attwood Marine
SPORTING GOODS> OUTDOOR RECREATION> BOAT & WATER SPORTS
Sports
attwood 1364A3 Marine Cowl Ventilator, One Size
Attwood Cowl Ventilator, 6 inches, Size: 2.25 inches H x 7 inches W x 9.75 inches Wide
Sports
Gtags:
| Attwood |
GSpecs:
Attwood Hood Vent Product Description
Attwood hull mounted vents are designed to be bolt-on installed as a complete unit from the interior or exterior of the hull. The vent pipe wraps around the bottom of the box to form a raised water barrier. Plastic vents are corrosion resistant and will not fade. All header boxes and vents are designed for intake or exhaust and meet ABYC H-2 cross section requirements.
Attwood Marine 1364A3 Attributes- Compatibility: 3 Inch ID Wire Supported Vent Hose
- Type: Hood
- Finish: Chrome
- Color: Silver
- Material: Zinc
- With fasteners: Yes
- Includes a flexible pipe flange that is screwed onto the pipe and then the vent snaps onto it. The flange
- Constructed of die-cast Perma-Plate ZAMAK chrome plated
- Flange is non-corrosive plastic
- For use with 3 inch ID wire -Vent pipe supported
- Limited warranty one year
- 69219-b-cowl-vent-1364a.pdf
- Attwood Warranty 2009.pdf
Hood Ventilator
Attwood Hull Mounted vents are designed to be installed by attaching as a complete unit from inside or outside the hull. The vent hose (not included) wraps around the bottom of the box to form a raised water barrier. Plastic vents are corrosion resistant and will not fade. Alls collector boxes and vents are designed for intake or exhaust and meet ABYC H-2 cross-sectional requirements.
For use with 3" metal-supported vent pipe inside diameter. Features a flexible pipe flange that screws onto the pipe, then the vent snaps onto the flange. The flange is made of non-corrosive plastic. installs with #8 screws.
Installation hole size: 3-1/4" to 3-1/2"
The vent installed on The Attwood cape fan shell is designed to be installed as a complete unit from inside or outside the shell by attaching ventilation pipe (not included)...
Frequently Asked Questions. Questions (FAQ) about Attwood Hood Fan Who is Attwood Marine?
How to describe Attwood Hood Fan?
What is the product type?
What is the material of the fan Attwood Cowl?
What is the weight of the product?
What is the size?
What is the color of the Attwood Cowl Fan?
How compatible is this product?
What is the finish of the product?
Who is Attwood Marine? For over 100 years, Attwood has proudly served the parts and accessories needs of the marine industry. Attwood has worked with you to design, manufacture, test and distribute a complete line of products that are part of your tradition. The folks at Attwood pride themselves on being more than just a "middleman" who buys and sells components. How to describe the Attwood hood fan? The Attwood Cape Fan Hull Mounted Vent is designed to be installed as a complete assembly from the inside or outside of the hull by fastening. Ventilation hose (not included)...What is the type of product? CowlWhat is the material of the Attwood Cowl fan? ZincWhat is the pweight of the product? 0.83What is the size? 6" L x 5-5/16" W x 2-1/4" HWhat is the color of the Attwood Hood Fan? SilverHow compatible is this product? 3" ID Metal Bracket Vent HoseWhat is the product finish? Chrome Plated
Save $11 when you purchase the Attwood Hood Fan for only $20 at NVN Marine! Same day dispatch before 3pm Attwood Hood Vent Technical Specifications
| Type: | Marine Hardware |
|---|---|
| Seller: | Attwood Marine |
| Weight: | 0.65 lbs |
| Product Installation: | Download PDF |
| Shipping Weight: | 0.65 lbs |
|---|---|
| Box sizes: | 3.00 (h) x 7 .00 (l) x 10.00 (l) |
| Cubic feet: | 210.0 |
| Returnable: | Yes |
| USPS First Class: | Yes |
| P65: | Yes |
