Attwood Stainless Steel Thru-Hull Standard Straight Barbed Wire - 1-1/8" Inside Diameter Marine Plumbing & Ventilation

Polish your image with these beautiful, durable stainless steel fittings. Each through valve and scupper is available with a new silicone seal.

Attwood Marine 665493 Attributes

Type: Barbed Thru-Hulls
Hose Diameter: 1-1/8 Thumb
Color: Silver
Material: Stainless Steel
Quantity: Single

Attwood Marine 665493 Features and Benefits

Cast from certified enhanced #316 stainless steel for strength
Lifetime corrosion resistance
Polish all visible areas to a mirror finish, then each part via passivation for added protection
Heavy gauge steel sidewalls resist continuous stress and pipe flexing
Seal is dimensionally stable: will not deteriorate or will not shrink over time
Excellent resistance to UV and climatic aging
Jointone-piece waterproof and foolproof
Eliminates the need to form and apply sealant or caulking
No more solvent-soaked chemicals, rags or cleaning
Limited Lifetime Warranty

Attwood Marine 665493 Installation Instructions

069373g ssthruhullscupper.pdf

Warranties Attwood Marine 665493

Warranty Attwood 2009.pdf

Attwood Marine Technical Bulletins 665493

66540.pdf

Stainless Steel Barbed Steel Thru-Hull Standard Straight - 1-1/8" ID

Polish your image with these beautiful, durable stainless steel fittings. Why specify plastic parts when these fittings will last the life of the boat?

Robust stainless steel construction:

Cast from certified enhanced 316 stainless steel alloy for added strength and lifetime corrosion resistance
AllVisible areas are polished to a mirror finish, then passivate each piece for added protection
Thick steel sidewalls resist continuous stress and pipe flexing

Faster and simpler installation:

Every time - The case is available with a new silicone seal
A channel under the flange holds a bead of sealant, making it easy to apply a joint without any hassle
All models have flats or end notches to hold as a gripping surface; an installer can tighten all connections from inside the hull
Barbed rear ends provide ample space to hold multiple clamps

Through-hole hulls straight stainless steel, Barbed

Standard thread model has full-length thread for thick hulls and easy tighteningthe

Specifications:

Pipe Size: (inches) 1-1/8" inside diameter
Flange Diameter: (inches) 2-1/4"
Thread O.D. (Outside Diameter): (inches) 1-3/8"
Flange Length thread: (inches) 2-3/8"
Barb length: (inches) 1-1/ 4"
Overall length: (inches) 3-7/ 8"
Install Hole Saw Size: (inches) 1-1/4"
NPSM Thread: (inches) 1"
Maximum Thickness Hull Length: (inches) 1-3/4"

*Stainless Steel Thru-Hull CoConnectors are designed to be installed above the waterline only

PRODUCT ID: 98091
SKU: NVN-98091
CSKU: CWR-98091
REWRITE: 109202- attwood-stainless-steel-standard-straight-shell- barbed wire
MPN: 66549-3
UPC:
ASIN:
WSKU:
SSKU:
KSKU: A7J665493
GSKU:
MSKU:
LSKU:
NAME: Attwood Stainless Steel Thru-Hull Standard Straight Barbed - 1-1/8" Inside Diameter
NAME_EX: ATTWOOD SS THRU-HULL 1 1/ 8" STANDARD STRAIGHT BARBED ID
PTITLE: Attwood Stainless Steel Hull Loop Standard Straight Barbed - 1-1/8" Diameter interior
TYPE: Marine Plumbing & Ventilation
SELLER: Attwood Marine
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> WATERCRAFT PARTS & ACCESSORIES

Gtags:

GSpecs:

Attwood Standard Straight Barbed Stainless Steel Fitting - 1-1/8" ID Product Description

Polish your image with these beautiful, durable stainless steel fittings. Each Scupper Thru-Hull and Valve is available with a new gasket in silicone

Attwood Marine 665493 Attributes

Type: Barbed hulls
>Pipe Diameter: 1-1/8 inch
Color: Silver
Material: Stainless steel
Quantity: Single

Attwood Marine 665493 Features and Benefits

Cast from certified enhanced #316 stainless steel allowing for strength
Lifetime corrosion resistance
Polish all areas visible on a mirror finish, then each part goes through passivation for added protection.
The side walls inthick steel resists continuous stress and bending of the pipe
Joint is dimensional.Stable - will not deteriorate or shrink over time
Excellent UV and weather resistance weathering
One-piece watertight, foolproof seal
Eliminates the need to form and apply sealant or caulking
No more chemicals , solvent or cleaning cloths
Limited lifetime warranty

Attwood Marine 665493 Installation Instructions

069373g ssthruhullscupper.pdf

Attwood Marine 665493 Warranties

Attwood Warranty 2009.pdf

Attwood Marine 665493 Technical Bulletins

66540.pdf

Stainless Steel Thru-Hull, Standard Straight Barbed - 1-1/8" ID

Polish your image with these beautiful, durable stainless steel fittings. Why specify parts in pdurable while these fittings will last the life of the boat?

Robust stainless steel construction:

Cast from a premium alloy Enhanced 316 stainless steel certified for added strength and lifetime corrosion resistance
All visible areas are polished to a mirror finish, then passivate each part for added protection
Thick steel sidewalls resist continuous stress and pipe flexing

Faster, simpler installation:

Each Thru-Hull is available with a new silicone gasket
A channel under the flange contains a bead of sealant, making it easy to apply a gasket without hassle.
All models feature key flats or end notch to hold as a gripping surface; an installer can tighten all connections from inside the hull
Barbed rear ends provide ample space to hold multiple pliers

Stainless Steel Straight Through Shells, Barbed

The standard thread model has full length thread for thick hulls and easy tightening

Specifications:

Size Pipe Size: (inches) 1-1/8" ID
Flange Diameter: (inches) 2-1/4"
Thread O.D. (Outer Diameter): (inches) 1-3/8"
Thread Length: (inches) 2-3/8"
Barb Length: (inches) 1-1/4 "
Overall Length: (inches) 3-7/8"
Installation Hole Saw Size: (inches) 1-1/4"
NPSM Thread: (inches) 1"
Maximum Shell Thickness: (inches) 1-3/4"

*Stainless steel through-hole connectors are designed for installation above the waterline only

FairQuestions (FAQ) about Attwood Stainless Steel Standard Straight Thru-Hulls - 1-1/8" ID Who is Attwood Marine?
What is the product type?
What is the material Attwood Standard Straight Barbed Stainless Steel Thru-Hull - 1-1/8" ID? What is the color of the Attwood Standard Straight Barbed Stainless Steel Thru-Hull - 1-1/8" ID? interior?
Who is Attwood Marine? For over 100 years, Attwood has proudly served the parts and accessories needs of the marine industry. d distribute a full range of products that are part of your tradition The people of Attwood pride themselves on being more than just a "middleman" who buys and sells components Barbed Wire Passers What is the material of the Attwood standard stainless steel straight bar thru-hull fittingbelé - 1-1/8" ID? Stainless SteelWhat is the color of the Attwood Standard Stainless Steel Straight Barbed Thru-Hull Fitting - 1-1/8" ID? Money

Save $13 when you purchase the Attwood Stainless Steel Thru-Hull, Standard Straight Barbed - 1-1/8" Inside Diameter for only $26 from NVN Marine! Same day shipping before 3:00 p.m. Attwood stainless steel thru-hull, standard straight barbed - 1-1/8" ID

Type. :	Marine plumbing and ventilation \| Through-hull fittings
Supplier:	Attwood Marine
Pipe Size:	1-1/8"
Material:	Stainless Steel
User Guide:	Download PDF
Product installation:	Download PDF

Attwood Stainless Steel Thru-Hull Standard Straight Barbed - 1-1/8" Inside Diameter User Reviews Attwood Stainless Steel Through-Hull Standard Straight Barbed - 1-1/8" Inside Diameter Shipping and return