Attwood Tsunami MK2 T500 Manual Bilge Pump with Installation Kit - 500 GPH and 12V Marine Plumbing & Ventilation

Tsunami MK2 T500 Manual Bilge Pump with Installation Kit - 500 GPH and 12V

This is a complete kit (includes bilge pump ) to install a manual bilge pump with a 3/4" ID hose outlet. The Tsunami Mk2 is the only manual bilge pump that eliminates airlocks. This is achieved by the patented X-Air™ impeller, which ejects air trapped in the pump and piping Additionally, the Tsunami Mk2 is the most reliable manual bilge pump in freshwater applications, as it offers 40% greater protection against ingress of air. water and electrolysis compared to the Mk1 pump.

Kit includes:

Attwood Tsunami Mk2 500 GPH Pump
Washer / Check Valve
90 degree outlet
Straight outlet
3/4" x 5' pump hose
3/4" thru-hull fitting
2-way on/off switch with bezel plate
Snap-Hose Clamps
Wiring Kit
Installation Kit

Easy Installation and Service

GPH (gallons per hour): 500
90° rotating elbow outlet allows users to install the pump anywhere in a full 360° orientation
Backward compatible hole pattern and motor cartridges of Tsunami Mk1 bilge and aerator pumps
External mounting feet and integrated outlet reduce time and effort
Service pump cartridges in hard-to-reach areas using one hand

Specifications:

Volt rating DC: 12V
Fuse Size: 3A
Wire Length: (inch) 29" / (mm) 735
Pipe Diameter: ( inches) 3/4" and 1"

*Caution: bilge pump switches are not protected against external ignition

PRODUCT ID: 98324
SKU: NVN-98324
CSKU: CWR-98324
REWRITE: 109435-attwood-tsunami-mk2-t500-manual-bilge-pump
MPN: 5614 -7
UPC:
ASIN:
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: Attwood Tsunami MK2 T500 Manual Bilge Pump with Installation Kit - 500 GPH and 12V
NAME_EX: ATTWOOD TSUNAMI MK2 MANUAL BILGE PUMP T500 500 GPH 12V
PTITLE: Attwood Tsunami MK2 T500 Manual Bilge Pump with Installation Kit - 500 GPH and 12V
TYPE: Marine Plumbing & Ventilation | Bilge Pumps
SELLER: Attwood Marine
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> WATERCRAFT PARTS & ACCESSORIES

Gtags:

GSpecs:

Attwood Tsunami MK2 T500 Manual Bilge Pump with Installation Kit - 500 GPH and 12V Product Description

Tsunami MK2 T500 Manual Bilge Pump with Installation Kit - 500 GPH and 12V

This is a complete kit (includes bilge pump) to install a manual bilge pump with a 3/4" ID hose outlet. The Tsunami Mk2 is the only manual bilge pump which eliminates airlocks This is achieved by the patented X-Air™ impeller, which ejects air trapped in the pump and piping. In addition, the Tsunami Mk2 is the most reliable manual bilge pump in applications. fresh water, as it offers 40% greater protection against water ingress and electrolysis compared to the Mk1 pump. p>Kit includes:

Attwood Tsunami Mk2 500 GPH Pump
Washer / Check Valve
90- Degree Outlet
Straight Outlet
Pump hose 3/4" x 5'
3/4" thru-hull fitting
2 On/off switch with bezel plate
Snap-It clamps
Cable kit
InstallationIon kit

Easy installation and maintenance

GPH (gallons per hour): 500
90° Rotatable elbow outlet allows users to install the pump anywhere in a full 360° orientation
Backward compatible hole pattern and motor cartridges of pumps Tsunami Mk1 Wedge and Aerator
External and integrated mounting feet Outlet reduces time and effort
Service pump cartridges in hard-to-reach areas using a one hand

Specifications:

Nominal DC Volts: 12V
Fuse Size: 3 A
Wire length: (inches) 29" / (mm) 735
Pipe diameter: (inches) 3/4" and 1"

*Caution: the bilge pump switches do not soundt not protected against external ignition

Frequently Asked Questions (FAQ) about Attwood Tsunami MK2 T500 Manual Bilge Pump with Installation Kit - 500 GPH and 12 V Who is Attwood Marine?
Who has been Attwood Marine for over 100 years? proud to serve the parts and accessories needs of the maritime industry. Attwood has worked with you to design, manufacture, test and distribute a complete line of products that are part of your tradition. The folks at Attwood pride themselves on being more than just a "middleman" who buys and sells components.

Save $25 on the purchase of the Attwood Tsunami MK2 T500 Manual Bilge Pump with Installation Kit - 500 GPH and 12V for only $49 from NVN Marine! Same day dispatch before 3 p.m. Attwood Tsunami MK2 T500 Manual Bilge Pump with Installation Kit - 500 GPH and 12V Technical Specifications

Type:	Plommarine construction and ventilation \| Bilge pumps
Seller:	Attwood Marine
Gallons per hour:	500
Type:	Pumps/ drives
Volts:	12
User Guide:	Download PDF
Product Installation:	Download PDF

Attwood Tsunami MK2 T500 Manual Wedge Pump with Installation Kit - 500 GPH and 12V Policy here.