Automatic Load Relay Plus Egis - 160A - 24V Electrical

Plus automatic load relay - 160 A - 24 V

This Egis 160 A automatic load relay eliminates dead starts by sharing the load on one of the two batteries and isolating the batteries when not charged. sources are present.

Applications:

Supports multiple independent motors or charging systems by incorporating two independent start or start inputs Motor isolation to allow isolation of load sources when both are active to maximize charging performance.
Protects electrical system cascading faults with an optional interlock against closing if a terminal is connected to a battery with a short-circuited cell

Features:

Ultra low power consumption by compared to conventional ACRs (7-10 mA) compared to 7610 ACR at 1.3 mA will not drain the batteries, meven after extended downtime of the electrical system.
Simple and robust installation: integrated sealed plug eliminates corrosion; includes Deutsch/Amphenol DTMess connector harness
Start assist input option to ensure maximum cranking amps are available by allowing batteries to be manually connected via remote switch
Bulletproof construction - sealed unit, stainless steel hardware and high-temperature resistant materials allow mounting anywhere; Built-in thermal overload protection
An additional low-amperage output can be used to report device status remotely or drive a secondary relay to charge a battery bank without a charging source (see examples)

Specifications:

Continuous current amps: 160
Voltage range (VDC ): 16 - 36
Off-state current consumption (mA): 1.3
Interrupt current (amps): 240
AC closing voltage range (VCC): 25.8 -27.2
AC opening voltage (VCC) range: 24.2-25.6

Focal characteristics:

Top side DIP switches

Accessible after assembly to program voltage settings and determine active features. Protected by self-retaining cover.

Self-locking stainless steel hardware

100% non-ferrous, corrosion-resistant materials. All mounting screws and nuts are self-locking.

Integrated I/O connector

Sealed Molex MX-150 connector eliminates susceptibility to corrosion and to vibrations. of 1/4" quick connect terminals on competitive products.

Connection options

Comes standard with a Deutsch D style connector harnessT/AT. Provides three connection options (MX-150, DT/AT and wires).

Easy integration with RT fuse blocks (24 HR circuits)

Optional EasyLink bus The bars reduce the space and cost of connecting the TH series relays to RT series fuse blocks.

LED Diagnostics

Indicates relay standby, under voltage, overvoltage/temperature, isolation/start assist and on/off status of the output.

PRODUCT ID: 103484
SKU: NVN-103484
CSKU: CWR-103484
REWRITE: 114595-egis-automatic-charge-relay- plus-160a
MPN: 7610-24
UPC:
ASIN:
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU :
NAME: EGIS PLUS-160A AUTOMATIC LOAD RELAY 24V
NAME_EX:
PTITLE: Egis Plus automatic load relay - 160A - 24V
TYPE: Electric | Accessories
SELLER: Egis Mobile Electric
VEHICLES AND PARTS> PARTS AND ACCESSORIES DE VEHICLES> PARTS AND ACCESSORIES FOR WATERCRAFT

Gtags:

GSpecs:

Egis Plus automatic charging relay - 160 A - 24 V Product description

Plus automatic charging relay - 160 A - 24 V

This Egis 160 automatic charging relay A eliminates dead starts by sharing the load. on one of the two batteries and isolating the batteries when no charging source is present.

Applications:

Takes support multiple independent motors or charging systems by incorporating two independent motor start or isolation inputs to allow isolation of the charging sources when both are active to maximize charging performance.
Protects cascading electrical system faults with optional interlock against closing if a terminal is connected to a battery with a shorted cell

Features:

Ultra low power consumption compared to typical ACRs (7-10 mA) pin relation to. the 7610 ACR at 1.3 mA will not drain the batteries, even after extended electrical system downtime.
Simple and robust installation - integrated waterproof socketg eliminates corrosion; includes Deutsch/Amphenol DTM connector harness
Crank-assist input option to ensure maximum cranking amps are available by allowing batteries to be manually connected via remote switch
Bulletproof construction - sealed unit, stainless steel hardware and high temperature materials allow mounting anywhere; Built-in thermal overload protection
An additional low-amperage output can be used to report device status remotely or drive a secondary relay to charge a battery bank without a charging source (see examples)

Specifications:

DC amps: 160
Voltage range (VDC): 16 - 36
Off-state current consumption (mA): 1.3
Interrupting current (amps): 240
AC closing voltage range (VCC): 25.8-27.2
AC opening voltage range (VCC): 24.2-25.6

Focal Features:

Top Side DIP Switches

Accessible after mounting for proparameters weight voltage and determination of active functionalities. Protected by a self-retaining cover.

Self-locking stainless steel hardware

100% non-ferrous, corrosion-resistant materials. All mounting screws and nuts are self-locking.

Integrated I/O connector

Sealed Molex MX-150 connector eliminates susceptibility to corrosion and to vibrations. of 1/4" quick-connect terminals on competitive products.

Connection options

Delivered as standardwith Deutsch DT/AT style connector harness. Provides three connection options (MX-150, DT/AT and wires).

Easy integration with RT fuse blocks (24 HR circuits)

Optional EasyLink bus The bars reduce the space and cost of connecting the TH series relays to RT series fuse blocks.

LED Diagnostics

Indicates relay standby, under voltage, overvoltage/temperature, isolation/start assist and on/off status of the output.

Save $51 on the purchase of the Plus Egis automatic load relay - 160A - 24V b> for only $94 from NVN Marine! Same day dispatch before 3 p.m. Egis Plus automatic charging relay - 160A - 24V Technical specifications

Type:	Electric \| Accessories
Supplier:	Egis Mobile Electric

RelayEgis Plus automatic charging - 160 A - 24 V /p>