B&G hydraulic cylinder at 12V Marine Navigation & Instruments
Hydraulic cylinder up to 12 V
High-power, efficient drive units for maximum power with minimum consumption. Actuator drives allow the Pilot's Power Steer mode to be used in the event of manual steering failure. Fully integrated hydraulic system (T0, T1 and T2 units), without external hoses, tanks, etc. Always remember to use the full load displacement of your boat. when selecting a driver. Typically, a fully provisioned yacht with full water and fuel tanks can be up to 20% larger than the expected displacement. If your boat falls between two driver types, choose the larger driver type: an underrated driver might not be able to perform properly when you need it most. If in doubt, please check with an authorized B&G dealer. If you are using a Ram drive, a rotary driveif or an existing drive unit from another manufacturer, these will, in most cases, be compatible with B & G units.
Features:
- Maximum boat size: 19,000 lbs (9,000 kg)
- Stroke: 7.87 in (200mm)
- Tough over time : 12 seconds
- Tiller arm: 6.89 in (175 mm)
- Thrust: 771.6 lb (350 mm)
- Rudder torque : 136.6 lbs (62 kg)
- Computer required: AC12, NAC-2
- *Typical average cruise consumption
The hydraulic gate is up to 12V with a high power, high efficiency drive unit to achieve maximum power with minimum consumption. The Ram drive allows the use of Power Steer mode on the Pilot in the following situations
PRODUCT ID: 86959
SKU: NVN-86959
CSKU: CWR-86959
REWRITE: 98070-b-g- hydraulic -ram-to-12v
MPN: 000-13902-001
UPC:
ASIN:
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: B&G 12V Hydraulic Cylinder
NAME_EX: B&G 12V HYDRAULIC Cylinder
br> PITTER: B&G 12V Hydraulic Cylinder
TYPE: Navigation & Marine Instruments | Autopilots
SELLER: B&G
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> WATERCRAFT PARTS & ACCESSORIES> WATERCRAFT STEERING PARTS> WATERCRAFT STEERING CABLES
Gtags:
GSpecs:
B&G hydraulic cylinder up to 12 V Product description
Hydraulic cylinder up to 12 V
High-power and efficient drive units for maximum power with low consumption minimal. Actuator drives allow the Pilot's Power Steer mode to be used in the event of manual steering failure. Fully integrated hydraulic system (T0, T1 and T2 units), without external hoses, tanks, etc. Always remember to use the full load displacement of your boat. when selecting a driver. Typically, a fully provisioned yacht with full water and fuel tanks can be up to 20% larger than the expected displacement. If your boat falls between two driver types, choose the larger driver type: an underrated driver might not be able to perform properly when you need it most. If in doubt, please check with an authorized B&G dealer. SIf you are using a Ram drive, rotary drive or existing drive unit from another manufacturer, these will, in most cases, be compatible with the B & G units.
Features:
- Max Boat Size: 19,000 lb (9,000 kg)
- Stroke: 7.87 in (200 mm)
- Hard over time: 12 seconds
- Tiller arm: 6.89 in (175 mm)
- Thrust: 771.6 lb (350 mm)
- Rudder torque: 136 .6 lb (62 kg)
- Computer required: AC12, NAC-2
- *Typical average cruise consumption
The hydraulic gate is up to 12V with high power and high efficiency drive unit to achieve maximum power with minimum consumption. The Ram Drive allows the use of power steering mode on the pilot in the following situations
Frequently Asked Questions (FAQ) about B&G 12V Hydraulic Cylinder Who is B&G?
How declaugh B&G Hydraulic cylinder at 12V?
Who is the B&G? B&G systems have been at the forefront of advanced marine electronics for over 50 years. B&G prides itself on providing only the highest quality products and services. Ambitious technical achievements and carefully proven solutions have been the company's brand. B&G is used by the best sailors in the world. How to describe the B&G 12V hydraulic cylinder? The hydraulic gate is up to 12V with a high power, high efficiency drive unit to achieve maximum power with minimum consumption. The Ram Drive allows Power Steer mode to be used on the Pilot in the following situations
- The hydraulic ram is a mechanical device that converts the linear motion of a liquid-filled cylinder into the rotary motion of a motor hydraulic.
- The hydraulic cylinder is used in some steering systems to provide assistanceelectric in the event of manual steering failure.
- Hydraulic cylinders are also used in other applications where electrical assistance is required, such as agricultural and construction equipment.
- Hydraulic cylinder up to 12 V Efficient, high-power drive units for maximum power with minimum consumption.
- Cylinder drives enable power steering mode on the driver to be used in case of manual steering failure
- Fully integrated (T0, T1 and T2) hydraulic
Buy at the best price Cylinder B&G hydraulics at 12V for only $1699 from NVN Marine! Free same day delivery before 3 p.m. B&G 12V Hydraulic Cylinder Technical Specifications
| Type: | Navigation & Marine Instruments | Autopilots |
|---|---|
| Supplier: | B&G |
For detailed shipping policy, please see our shipping policy and you can find our return & return policy refund here.
