Balmar 170 Amp Alternator 12 Volt 1-2" Single Leg K6 Pulley with Isolated Ground Electrical

170 Amp, 12 Volt Alternator, 1" - 2" Single Leg K6 Pulley with Isolated Ground

Balmar offers a wide range of upgrades from alternator power designed specifically for marine industry applications. Balmar installs high reliability bearings, robust rectifier diodes and enhanced heat dissipation capabilities on all of our alternators to ensure improved system reliability combined with increased charging power.

Features :

1-2" Single leg
K6 serpentine pulley
170 A
12 V
Insulated Ground

This product cannot be returned to the original point of purchase. Please contact the manufacturer directly if you have any problems or concerns. strong>

This new 170 A XT alternator mounted on two feet is equipped with K6 pulleys for 6-slot serpentine belts. This is a 6-slot alternator.much higher power than the power alternator which can usually be accommodated in a small housing. The innovation that makes this possible is the new braided stator design, which significantly improves efficiency. The new XT Series alternator also includes an internal backup regulator for emergency situations. For installation details, please refer to the dimensional drawing. The alternator is slightly shorter than the standard small alternator, but is designed to be used in the same location. These alternators all require a serpentine belt or dual V-belt, and for maximum power output, the MC614-H regulator (not included) is necessary as it can provide more demand to drive it at full power. High excitation current. Small high efficiency alternator with external regulation, 12 volt output, 170 amps, Yanmar ID type 3.15" on both feet. This is not aan isolated mass alternator. Data for K6 6-slot serpentine belt pulley with built-in emergency regulator. Table, size and output curve require a maximum charge regulator, but are not included.Alternator 319-balmar-170amp-12v-1-2-single-foot
MPN: XT-SF-170- K6-IG
UPC: 676205502085
ASIN:
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: Alternator Balmar 170 AMP, 12V, 1-2" Single Foot K6 Pulley with Isolated Ground
NAME_EX: BALMAR 170 AMP 12V 1-2" ALTERNATOR, SINGLE FOOT K6 PULLEY WITH
TITLE: Balmar Alternator 170AMP, 12V, 1-2" Single Leg K6 Pulley with Isolated Ground
TYPE: Electric Alternators
SELLER | : Balmar
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> WATERCRAFT PARTS & ACCESSORIES> WATERCRAFT ENGINE PARTS Balmar Marine XT -DF-170 - K6 double foot alternator with K6 pulley

Gtags:

BALMER

GSpecs:

Balmar 170 Amp, 12 Volt Alternator, 1" to 2" Single Leg K6 Pulley with Isolated Ground Product Description

170 Amp, 12 Volt Alternator, 1" to 2" Single Leg K6 Pulley with isolated ground

Balmar offers a wide range of alternator power upgrades designed specifically for marine industry applications. Balmar installs high reliability bearings, robust rectifier diodes and enhanced heat dissipation capabilities on all of our alternators to ensure improved system reliability combined with increased charging power.

Features :

1-2" Single leg
K6 serpentine pulley
170 A
12 V
Isolated Grounding

This product cannot be returned to the original point of purchase. Please contact the manufacturer directly if you have any problems or concerns. .

This new 170 A mounted ontwo feet. The XT alternator is equipped with K6 pulleys for 6-slot serpentine belts. This is a much higher efficiency alternator than the alternator which can usually be accommodated in a small enclosure. The innovation that makes this possible is the new braided stator design, which significantly improves efficiency. The new XT Series alternator also includes an internal backup regulator for emergency situations. For installation details, please refer to the dimensional drawing. The alternator is slightly shorter than the standard small alternator, but is designed to be used in the same location. These alternators all require a serpentine belt or dual V-belt, and for maximum power output, the MC614-H regulator (not included) is necessary as it can provide more demand to drive it at full power. High excitation current. Small high alternatort externally regulated output, 12 volt output, 170 amps, Yanmar type ID 3.15" on both legs. This is not an isolated mass alternator. Data for K6 6 slot serpentine belt pulley with Built-in backup regulator. Table, size, and output curve require a maximum load regulator, but are not included.

Balmar 170 Amp Alternator, 12 V, K6 Single Foot Pulley 1" to 2" with Isolated Ground Related ProductsBalmar Belt Buddy with Universal Adjustment Arm
Balmar Universal Adjustment Arm
Balmar SG200 Battery Monitor Kit with Display Shunt and 10m Cable - 12-48 VDC
Balmar Offshore XT Series Repair Kit - 170 A - 12 V

Frequently asked questions (FAQ) about the Balmar 170 A, 12 alternator V, 1-2" Single Leg K6 Pulley with Isolated Ground Who is the Balmar?
How to Describe the Balmar 170 Amp, 12V, 1-2" Single Leg K6 Alternatorwith isolated ground?
What is the operating voltage of the product?
What is the amperage of the product?
Who is the Balmar? Balmar has been serving the recreational marine industry for over 30 years.>Balmar provides DC charging products and battery monitors to help sailors and boaters charge and monitor their batteries more efficiently. Balmar is recognized throughout the industry for its innovative technology, expert technical service and product reliability. How to describe the Balmar 170 Amp, 12 Volt Alternator, 1-2" Single Leg K6 Pulley with Isolated Ground? This new 170 A XT alternator mounted on two feet is equipped with K6 pulleys. for 6-slot serpentine belts. This is a much higher efficiency alternator than the output alternator which can usually be accommodated in a small housing. The innovation that makes this possible is the new designption of the braided stator, which significantly improves efficiency. The alternator also includes an internal backup regulator for emergency situations. For installation details, please refer to the dimensional drawing. The alternator is slightly shorter than the standard small alternator, but is designed to be used in the same location. belt or double V-belt, and for maximum power output, the MC614-H regulator (not included) is required as it can provide more demand to drive it at full power. High excitation current. Small high efficiency externally regulated alternator, 12 volt output, 170 amps, Yanmar type ID 3.15" on both legs. This is not an isolated mass alternator. Data for K6 serpentine belt pulley with 6 slots with built-in backup regulator The board, size and output curve require a maximum load regulator, but are not included.

Balmar offers a wide range of alternator power upgrades designed specifically for marine industry applications.
The 170 Amp, 12 V Alternator , 1-2" Single Leg K6 Pulley with Isolated Ground is an excellent choice for customers who need to upgrade their system.
The 170 Amp, 12 V, 1 Alternator -2" Single leg 2" K6 pulley with isolated grounding is designed to resist corrosion and the harshest marine environments.

Alternator is a device that converts mechanical energy into electrical energy.

li>
It is usually located outside the engine.
The alternator has a rotating armature with coils of wire that rotates in a magnetic field.
The magnetic field induces an electric current in the coils as they rotate in front of the poles of the magnet.

With a 170 AMP alternator, yourmotor will run smoother and cleaner.
The single leg K6 pulley system is designed for the harshest marine environments.
You can rest assured that Balmar offers you a 5-year warranty.

What is the operating voltage of the product? 12 V

Balmar offers a wide range of alternator power upgrades designed specifically for marine industry applications.
The 170 Amp, 12 V, 1 Alternator -2" K6 Single Leg Pulley with Isolated Ground is an excellent choice for customers who need to upgrade their system.
The K6 Single Leg Pulley for 170 Amp Alternator, 12 volts, 1-2" with isolated grounding is designed to resist corrosion and the harshest marine environments.
The altarNator is a device that converts mechanical energy into electrical energy.
It is usually located outsideof the engine.
The alternator has a rotating armature with coils of wire that rotates in one direction. magnetic field.
The magnetic field induces an electric current in the coils as they rotate in front of the magnet's poles.
With a 170 AMP alternator, your engine will run faster gently and more cleanly.
The K6 single foot pulley system is designed for the harshest marine environments.
You can rest assured that Balmar offers you a 5 year warranty.

What is the amperage of the product? 170a

Save $127 on the purchase of Balmar Alternator 170 A, 12 V, 1-2" K6 Single Foot Pulley with Isolated Ground for only $1,073 from NVN Marine! Fast, Free Same Day Delivery Before 3pm Balmar 170 AMP Alternator, 12V, Single Leg K6 Pulley with Isolated Ground. .Technical specifications