Sale!
Balmar Alternator 100A 12V 3.15" Double Foot Saddle Single K6 Pulley with Isolated Ground
Balmar Alternator 100A 12V 3.15" Double Foot Saddle Single K6 Pulley with Isolated Ground

Balmar Alternator 100A 12V 3.15" Double Foot Saddle Single K6 Pulley with Isolated Ground

$104

SKU: Balmar Alternator 100A 12V 3.15" Double Foot Saddle Single K6 Pulley with Isolated Ground
Category:

Balmar Alternator 100A 12V 3.15" Double Foot Saddle Single K6 Pulley with Isolated Ground Electrical

Balmar Series 6 Alternators Designed for Recreational Applications Balmar Series 6 alternators deliver high-output performance in a small, compact package and are available in all four common mounting configurations. While all of Balmar's high-efficiency alternators are designed and recommended for use with our multi-stage voltage regulators, the Series 6 alternator uses Balmar's Smart Ready technology. If battery charges are relatively low and your engine runs frequently, the alternator's internal regulator may be sufficient to meet your electrical needs without external regulation. If your vessel uses larger deep cycle battery banks or if the engine duty cycle is less frequent (as is the case in most boating applications), the Series 6 alternator combines and operates from seamlessly with voltage regulator ARS-5 or Balmar's Maximum Load Voltage Regulator. . Purchased individually or as a charging kit, Series 6 alternators can solve a multitude of charging problems at an affordable price. All kits come with an alternator, regulator and two temperature sensors.

Balmar 60120K6 Attributes Balmar 60120K6 Features and Benefits
  • Best selling alternator range of Balmar
  • 70A, 100A and 120A Versions
  • Patented Smart Ready Technology
  • Dual Fan Cooling
  • High Flow Frame high air
  • Maximum RPM: 12,000
  • USCG Title 33, ISO, SAE and CE compliant
  • Ideal for modest load upgrades
  • li>

Alternator 100 Amp 12 V 3.15" Single Double Saddle K6 Pulley with Isolated Ground

Alternator, Series 60, 120 A, 12 V, Saddle Mount (Dual Leg), 3.15 Inch, K6 Serpentine Pulley,Hitachi style insulated floor mounting; Typical for Yanmar, Westerbeke, Lehman and Perkins-Sabre engines.

This product cannot be returned to the original point of purchase. Please contact the manufacturer directly with any problems or concerns.

The 12 volt alternator has dual mounting feet and 120 amp output, and is equipped with a 6 slot serpentine pulley . High efficiency 12V 120A alternator with K6 pulley. Small chassis, isolated from the ground. Single Yanmar type outlet with external adjustment on both feet. Patented SmartReady internal replacement regulator. The certified ignition protection device can be used in gasoline or diesel engines. Datasheet, size, output curve of large capacity cooler working with two internal fans Technical Tips When you install the alternator on the engine, the diameter of the mounting bolt should be the same as the diameter of all holess that he crosses. Otherwise, the socket can be used to modify the alternator mounting bracket. When the mounting bolts are tightened, the bushing on the rear alternator foot will slide forward to tighten the gap. At this point, the alternator should be firmly attached without shaking. This must be done correctly, otherwise the alternator will lift when the belt is tensioned, and the result: Misalignment will cause excessive belt wear.
PRODUCT ID: 83214
SKU: NVN-83214
CSKU : CWR-83214
REWRITE: 94325-balmar-alternator-100-amp-12v-3- 15-double
MPN: 60-120-K6
UPC: 676205750585
ASIN: B08H217CSR
WSKU:
SSKU: BAL-60-120-K6
KSKU: BAL60120K6
GSKU:
MSKU:
LSKU:
NAME: Balmar 100 A 12 V 3.15 Alternator "Double Foot Saddle Single K6 Pulley with Isolated Ground
NAME_EX: BALMAR ALTERNATOR 100 AMP 12V 3.15" SINGLE DOUBLE FOOT SADDLE
PTITLE: Balm Alternatorar 100A 12V 3.15" Dual Leg K6 Single Saddle with Isolated Ground
TYPE: Electric | Alternators
SELLER: Balmar
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> POWERWATER PARTS & ACCESSORIES> POWERWATER ENGINE PARTS
Sports

Balmar 100 Amp 12V 3.15" Alternator Double Foot Saddle Single K6 Pulley with Insulated Ground 60-120- K6
Sports
Gtags:
BALMER

GSpecs:

Balmar 100 Amp 12V 3.15" Alternator Double Foot Saddle Single K6 Pulley with Isolated Ground Product Description

Balmar 6 Series Alternators Designed for Recreational Applications Balmar 6 Series Alternators deliver high output performance in a small, compact package and is available in all four common mounting configurations Although all Balmar high efficiency alternators are designed and recommended for use with our multi-stage voltage regulators, the series alternator. 6 uses Balmar's Smart Ready technology if battery charges are relatively low and your engine is running frequently, the alternator's internal regulator may be sufficient to meet your electrical needs without external regulation. larger deep cycle battery banks or if the motor duty cycle is less frequent (as is the case in mostpart of navigation applications), the 6. -Series alternator combines and works seamlessly with Balmar's ARS-5 voltage regulator or purchased maximum load voltage regulator.Either individually or as a kit charging, Series 6 alternators can solve a multitude of charging problems at a reasonable price. All kits come with an alternator, regulator and two temperature sensors.

Balmar 60120K6 Attributes Balmar 60120K6 Features and Benefits
  • Balmar's best-selling alternator range
      /li>
    • 70A, 100A and 120A versions
    • Patented Smart Ready Technology
    • Dual Cooling fan
    • High airflow frame
    • Maximum RPM: 12,000
    • USCG Title 33, ISO, SAE and CE compliant
    • Ideal for modest charging upgrades

    100A 12V 3.15" Dual Foot Alternator, PulleyK6 Single with Isolated Ground

    Alternator, 60 Series, 120 A, 12 V, Saddle Bracket (Dual Leg), 3.15 in, K6 Serpentine Pulley, Floor Mount Hitachi-style insulated; typical of Yanmar, Westerbeke, Lehman and Perkins-Sabre engines.

    This product cannot be returned to the original point of purchase. Please contact the manufacturer directly if any problems or concerns arise.

    The 12 volt alternator features two mounting feet and a 120 amp output, and is equipped with a 6 slot serpentine pulley. High efficiency 12V 120A alternator with K6 pulley. Small chassis, isolated from the ground. Single Yanmar type outlet with external adjustment on both feet. Patented SmartReady internal replacement regulator. The certified ignition protection device can be used in gasoline or diesel engines. Datasheet, size, output curve of large capacity cooler running with two fansInternal Tech Tips When you install the alternator on the engine, the diameter of the mounting bolt should be the same as the diameter of all the holes it passes through. Otherwise, the socket can be used to modify the alternator mounting bracket. When the mounting bolts are tightened, the bushing on the rear alternator foot will slide forward to tighten the gap. At this point, the alternator should be securely attached without shaking. You must do this correctly or the alternator will lift when the belt is tensioned and the resulting misalignment will cause excessive belt wear.

    Frequently asked questions (FAQ) about the Balmar 100 A 12 V 3.15" alternator Double foot saddle Single K6 pulley with isolated earthing Who is the Balmar?
    How to describe the Balmar alternator 100 A 12 V 3.15 "K6 single double foot pulley with isolated earthing?
    What is the operating voltageement of the product?
    What is the amperage of the product?
    Who is the Balmar? Balmar has been serving the recreational marine industry for over 30 years. Balmar provides DC charging products and battery monitors to help mariners and power boaters charge and monitor their batteries more efficiently. Balmar is recognized throughout the industry for its innovative technology, expert technical service and product reliability. How to describe the Balmar 100 Amp 12 Volt 3.15" Dual Leg Alternator Single K6 Pulley with Isolated Ground? The 12 volt alternator has two mounting legs and a 120 amp output, and is equipped with a 6-slot serpentine pulley. High efficiency 12V 120A alternator with K6 pulley. Single Yanmar type output with patented SmartReady replacement regulator. against ignition ccertified can be used in gasoline or diesel engines. Datasheet, size, output curve of large capacity cooler working with two internal fans Technical Tips When you install the alternator on the engine, the diameter of the mounting bolt should be the same as the diameter of all the holes in it crosses. Otherwise, the socket can be used to modify the alternator mounting bracket. When the mounting bolts are tightened, the bushing on the rear alternator foot will slide forward to tighten the gap. At this point, the alternator should be firmly attached without shaking. You must do this correctly, otherwise the alternator will be lifted when the belt is tensioned, and the resulting misalignment will cause excessive belt wear.
    • Alternator 100 Amp, 12V, 3.15" Saddle double foot, single K6 pulley with insulated ground alternator, series 60, 120 A, 12 V, supsaddle port (double leg), 3.15 inch, K6 serpentine pulley, Hitachi style insulated floor mount
    • Typical for Yanmar
    • Designed to replace the stock alternator on Yanmar tractors
    • Specially designed for Yanmar alternators
    • Dual leg mounting
    • 3.15" diameter
    • K6 Serpentine Pulley

    The Balmar 100 Alternator is a high quality, double foot, 3.15', mounted alternator saddle mounted, 120 amp, 12 volt, insulated It is designed for use with serpentine belt drive systems and includes a K6 serpentine pulley.

    What is the operating voltage of the product?
    • 100A 12V 3.15" Dual Leg Alternator, Single K6 Pulley with Isolated Ground Alternator, 60.120A Series, 12V, Saddle Bracket (Dual Leg), 3.15" , K6 serpentine pulley, Hitachi style insulated ground mount
    • Typical for Yanmar
    • Codesigned to replace the original alternator on Yanmar tractors
    • Specially designed for Yanmar alternators
    • Dual foot mounting
    • 3.15" diameter
    • K6 serpentine pulley
    • Alternator Series 60 120 A 12 V double foot 3.15' saddle support K6 insulated serpentine pulley
    • The series 60 120 alternator A 12V dual leg 3.15' saddle mount K6 insulated serpentine pulley is the perfect accessory for your car!
    • Designed to provide the best performance and durability.
    • The 60 Series Alternator 120 Amp 12 Volt Dual Leg 3.15' Saddle Mount K6 Insulated Serpentine Pulley is a heavy duty pulley that can handle up to 120 amps of power.
    • The serpentine design allows for variety of wire routing options, ensuring the best possible installation.lit for your vehicle.
    What is the amperage of the product 100a

    Save 91? $ with the purchase ofBalmar 100 Amp 12V 3.15" Alternator K6 Single Double Saddle Pulley with Isolated Ground for only $766 from NVN Marine! Free Same Day Shipping Before 3 p.m. Balmar 100 Amp 12V 3.15" Alternator Single Double Leg K6 Pulley with Isolated Ground Technical Specifications
    Type:

    Electric | Alternators
    Supplier:

    Balmar
    Weight:

    13.35 lbs
    Voltage:

    12v
    Intensity:

    100a
    Product brochure:

    Download PDF
    Balmar 100 Amp 12V 3.15" Alternator Double foot K6 single saddle pulley with adjustment insulated ground>

    13.35 lbs

    Box sizes:

    9.00 (h) x 9 .00 (l) x 10.00 (l )
    Cubic feet:

    810.0
Recently Viewed
Related products