Balmar Alternator 120 A Saddle Mount ARS Regulator with Temperature Sensor Single K6 Pulley Electrical

120 Amp Alternator, Saddle Mounted ARS Regulator with Temperature Sensor, Single K6 Pulley

Kit Includes: 60-120-K6 Alternator, ARS-5 Regulator, temperature sensors, mounting hardware

60-120-K6 Alternator: 120 A, 12 V, Saddle Mount (Dual Foot), 3.15 inch, K6 Serpentine Pulley, Isolated Ground

Hitachi style assembly; Typical for Yanmar, Westerbeke, Lehman and Perkins-Sabre engines

BALMER

GSpecs:

Balmar Alternator 120A Saddle Mount ARS Regulator with Temperature Sensor Single K6 Pulley Product Description

120A Alternator Saddle Mount ARS Regulator with Temperature Sensor Single K6 Pulley

Kit Includes: 60-120-K6 Alternator, ARS-5 Regulator, Temperature Sensors, Mounting Hardware

60-120-K6 Alternator: 120A, 12V, Mounting saddle-mounted (double leg), 3.15", K6 serpentine pulley, insulated Hitachi-style floor mount; Typical for Yanmar, Westerbeke, Lehman and Perkins-Sabre engines

This product cannot be returned to the original point of purchase. Please contact the manufacturer directly with any problems or concerns.

This alternator and regulator kit with temperature sensor comes with an ARS5-H regulator. The alternator is mounted on two legs and has an output of 12 volts and 120 amps. It has a high power alternator with hook pulley6-slot ntine. Small chassis, isolated from the ground. The Yanmar type has a single outlet with externally adjustable mounting on both legs. Patented SmartReady internal replacement regulator. The certified ignition protection device can be used in gasoline or diesel engines. The large capacity cooling generator kit operating with two internal fans includes an ARS5-H controller and two temperature sensors. Data Sheet, Size, Performance Curve Technical Tips When you install the alternator on the engine, the diameter of the mounting bolt should be the same as the diameter of all the holes it passes through. If not, bushings can be used to modify the alternator mounting brackets. When the mounting bolts are tightened, the bushing on the rear alternator foot will slide forward to tighten the gap. At this point, the alternator should be firmly attached without shaking. You mustdo it correctly, otherwise the alternator will lift when the belt is tensioned and the resulting misalignment will cause excessive belt wear.

Frequently Asked Questions (FAQ) about the Balmar 120 Amp Saddle Alternator Electronically mounted ARS regulator with temperature sensor, single K6 pulley Who is the Balmar?
How to describe the Balmar Regulator alternator 120A Saddle Mount ARS with Temperature Sensor, Single K6 Pulley?
What is the operating voltage of the product?
What is the amperage of the product?
Who is the Balmar ? Balmar has been serving the recreational marine industry for over 30 years. Balmar provides DC charging products and battery monitors to help mariners and power boaters charge and monitor their batteries more efficiently. Balmar is recognized throughout the industry for its innovative technology, expert technical service andt the reliability of its products. How to describe the Balmar 120 Amp Alternator, Saddle Mount ARS Regulator with Temperature Sensor, Single K6 Pulley? This alternator and regulator kit with temperature sensor comes with an ARS5-H regulator. The alternator is mounted on two legs and has an output of 12 volts and 120 amps. It has a high power 6 slot serpentine pulley alternator. Small frame, isolated from the ground. The Yanmar type has a single outlet with external adjustment on both feet. Patented SmartReady internal replacement regulator. The certified ignition protection device can be used in gasoline or diesel engines. The large capacity cooling generator kit operating with two internal fans includes an ARS5-H controller and two temperature sensors. Data sheet, size, efficiency curve Technical advice When you install the alternator on the engine, the diameter of the fixing bolttion must be the same as the diameter of all the holes it passes through. If not, bushings can be used to modify the alternator mounting brackets. When the mounting bolts are tightened, the bushing on the rear alternator foot will slide forward to tighten the gap. At this point, the alternator should be firmly attached without shaking. You must do this correctly or the alternator will lift when the belt is tensioned and the resulting misalignment will cause excessive belt wear.

The ARS Saddle Mount Regulator Kit for 120 Amp Alternator with temperature sensor and single K6 pulley includes a 60-120-K6 alternator, ARS-5 regulator, temperature sensors and mounting hardware.
The 60-120-K6 alternator is a 12 V, 120 A alternator mounted on a saddle (double foot), 3.15 inches in diameter and K6 output.

The ARS regulator for 120 alternatorSaddle mounted with The K6 Single Pulley Kit with Temperature Sensor is designed to be a complete kit for replacing your alternator.
The 60-120-K6 Alternator is a 120 K6 alternator A, 12 V, saddle mounted (double leg), 3.15 in. which will replace your old one and provide the power your vehicle needs.
The ARS-5 regulator provides voltage regulation to ensure that the output voltage of your new alternator is always at a safe level.
li>

Balmar The 120 Alternator is a high quality replacement for your old, damaged or unreliable alternator. This alternator is designed to provide the power you need with an output of 12 volts and a capacity of 120 amps. It features a 3.15' serpentine pulley with insulated ground and comes with mounting brackets and hardware.

What is the operating voltage of the product? 12 V

The ARS su mount regulatorr Saddle for 120A Alternator with Temperature Sensor and Single K6 Pulley Kit includes 60-120-K6 alternator, ARS-5 regulator, temperature sensors and mounting hardware.
The L The 60-120-K6 alternator is a 12 V, 120 A saddle mounted (double foot) alternator, 3.15 inch diameter and K6 output.
The 120 A saddle mounted alternator , ARS regulator with temperature sensor, single K6 pulley The kit is designed to be a complete kit for replacing your alternator.
The 60-120-K6 alternator is a 120 Amp K6 alternator, 12V, saddle mounted (double leg), 3.15 inch, which will replace your old one and provide the power your vehicle needs.
The ARS-5 regulator provides voltage regulation to ensure that the output voltage of your new alternator is always at a safe level.
The 60 Series alternator is designed for use with a wide variety of engines and systemselectrical.
The kit includes an alternator, regulator, temperature sensors and mounting brackets.
With this kit you can easily replace old or worn parts on your vehicle and ensure its proper operation.
The 60 Series Alternator is a heavy duty 12 volt, dual leg, 3.15', saddle mounted alternator. with isolated ground
This kit includes an ARS-5 regulator for maximum output voltage and includes two temperature sensors and mounting hardware
The alternator has a serpentine pulley for easy installation of the belt
li>

What is the amperage of the product? 120a

Save $112 when you purchase the Balmar 120 Amp Alternator, Saddle Mounted ARS Regulator with Temperature Sensor, Single K6 Pulley for only $937 from NVN Marine! Fast, free same-day delivery before 3 p.m. Balmar Alternator 120 Amp Selle Moup tou ARS regulator with temperature sensor Single K6 pulley Technical specifications

Type:	Electric \| Alternators
Supplier:	Balmar
Weight:	16.5 lbs
Amperage:	120a
Voltage:	12v
Product brochure:	Download PDF

Balmar Alternator 120 A Saddle Mount ARS Regulator with Temperature Sensor K6 Pulley unique User reviews Balmar 120 A saddle alternator Mount on ARS regulator with temperature sensor Single K6 pulley Shipping and returns

Shipping weight:	16.5 lbs
Box sizes:	11.00 (h) x 11.00 (w) x 14.00 (l)
Cubic feet:	1694.0

For une detailed shipping policy, please check our shipping policy and you can find our return policy. and refund policy here.