Balmar Alternator 3.15" Double Saddle J10 Serpentine Pulley - 170A - 12V Electrical
3.15" Double Foot and J10 Serpentine Pulley Alternator - 170 Amp - 12 V
Balmar offers a wide range of engineered alternator power upgrades specifically for marine industry applications Balmar installs high reliability bearings, robust rectifier diodes and enhanced heat dissipation capabilities on all of our alternators to ensure improved system reliability combined with increased charging power.
Features:
- 3.15" double foot saddle
- J10 serpentine pulley
- 170A
- 12V
This is the new Balmar XT alternator. This is a two legged model with J10 pulley. The output power of its alternator is much higher than that of a comp alternatoract under normal conditions. The innovation that makes this possible is the new braided stator design, which significantly improves efficiency.efficiency. The new XT Series alternator also includes an internal backup regulator for emergency situations. For installation details, please refer to the dimensional drawing. The alternator is slightly shorter than the standard small alternator, but is designed to be installed in the same location. These alternators all require a serpentine belt or dual V-belt, and for full power output the MC614-H regulator (not included) is necessary as it can provide the most needed to drive them at full power. High excitation current. Small High Efficiency Externally Regulated Alternator, 12 Volt Output, 170 Amps, 3.15" ID Yanmar, Two Feet Installation Type. This is not an isolated mass alternator, requires repair kitserpentine belt conversion, built-in backup regulator, datasheet, size, output Curve A maximum load regulator is required, but not included.
PRODUCT ID: 74946
SKU: NVN-74946
CSKU: CWR-74946
REWRITE: 86057-balmar-alternator-3-15-dual-saddle-foot-j10
MPN: br>WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: Balmar Alternator 3.15" Double Foot J10 Serpentine Pulley - 170A - 12V
NAME_EX: BALMAR ALTERNATOR 170 AMP 12 VOLTS 3.15" DOUBLE FOOT SADDLE
PTITLE: Balmar Alternator 3.15" Double Foot J10 Serpentine Pulley - 170A - 12V
TYPE: Electric |>SELLER: Balmar
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> WATERCRAFT PARTS & ACCESSORIES> WATERCRAFT ENGINE PARTS
Sports
Balmar 3.15" Alternator double J10 Serpentine Pulle foot saddle. [XT-DF-170-J10]
Ballard Commercial Industries, Inc.
Gtags:
| BALMER |
GSpecs :
Balmar Alternator 3.15" Double saddle J10 serpentine pulley - 170A - 12V Product description
3.15" alternator Double saddle J10 serpentine pulley - 170A - 12V
Balmar offers a wide range of alternator power upgrades designed specifically for marine industry applications. Balmar installs high reliability bearings, robust rectifier diodes and enhanced heat dissipation capabilities on all of our alternators to ensure improved system reliability combined with increased charging power.
Features :
- 3.15" double foot saddle
- J10 serpentine pulley
- 170A
- 12V
It. This is the new Balmar XT alternator. It is a two-legged model.with J10 pulley. The power output of its alternator is much higher than that of a compact alternator under normal conditions. The innovation that makes this possible is the new braided stator design, which significantly improves efficiency. The new XT Series alternator also includes an internal backup regulator for emergency situations. For installation details, please refer to the dimensional drawing. The alternator is slightly shorter than the standard small alternator, but is designed to be installed in the same location. These alternators all require a serpentine belt or dual V-belt, and for full power output the MC614-H regulator (not included) is necessary as it can provide the most needed to drive them at full power. High excitation current. Small high efficiency externally regulated alternator, 12 volt output, 170 amps, 3.15" ID Yanmar, installationguy on both feet. This is not an isolated mass alternator, requires a serpentine belt conversion kit, built-in backup regulator, data sheet, size, output curve a maximum charge regulator is required, but not included
Balmar Alternator 3.15" Double. Foot Saddle J10 Serpentine Pulley - 170 A - 12 V Related ProductsBalmar Belt Buddy with Universal Adjustment Arm
Balmar Universal Adjustment Arm
Monitor Kit Balmar SG200 battery pack with display shunt and 10 m cable - 12-48 VDC
Balmar Offshore XT series repair kit - 170 A - 12 V
Frequently asked questions (FAQ) about the Balmar 3.15" alternator with double foot and serpentine pulley J10 - 170A - 12V Who is the Balmar?
How to describe the Balmar 3 alternator .15" double foot with serpentine pulley J10 - 170A - 12V?
What is the operating voltage of the product?
What is it? the amperage of the produit?
Who is the Balmar? Balmar has been serving the recreational marine industry for over 30 years. Balmar provides DC charging products and battery monitors to help mariners and power boaters charge and monitor their batteries more efficiently. Balmar is recognized throughout the industry for its innovative technology, expert technical service and product reliability.How to Describe the Balmar 3.15" Double Foot Alternator with J10 Serpentine Pulley - 170 Amp - 12 V? This is the new Balmar XT alternator It is a two-legged model with J10 pulley The output power of its alternator is much higher than that of. a compact alternator under normal conditions The innovation that makes this possible is the new braided stator design, which significantly improves efficiency. The new XT series alternator also includes an internal backup regulator.emergency situations. For installation details, please refer to the dimensional drawing. The alternator is slightly shorter than the standard small alternator, but is designed to be installed in the same location. , and for full power output, the MC614-H regulator (not included) is necessary as it can provide the most needed to drive them at full power. High Excitation Current.Small High Efficiency Ted Alternator, 12 Volt Output, 170 Amps, 3.15" ID Yanmar Type Installation on Both Feet. This is Not an Isolated Ground Alternator, Requires a serpentine belt conversion kit, built-in backup regulator, data sheet, size, output Maximum curve A charge regulator is required, but not included.
- The Balmar alternator is a crucial component of your boat's electrical system.
- The alternator provides the energy needed to charge your batteries, and without them, you're stuckat the dock.
- It is important to have a reliable and efficient alternator in all conditions.
- We offer a wide range of alternators designed for maritime industry applications , with high-reliability bearings, heavy-duty rectifiers and other components designed specifically for boats.
- Designed for marine industry applications
- High reliability bearings, robust rectifier
- Available in a wide range of alternator power upgrades
- The range of Balmar alternator power upgradesis designed specifically for marine industry applications.
- High reliability bearings and heavy-duty rectifiers ensure your boat will have power reliable electric in all conditions. weather conditions.
- The J10 double saddle serpentine pulley with 3.15" alternator foot - 170A -12V is perfect for boats with higher amps or larger engines
- The Balmar alternator is a crucial part of your boat's electrical system.
- The alternator provides the power needed to charge your batteries, and without it, you're stuck at dock.
- It is important to have a reliable and efficient alternator in all conditions.
- We offer a wide range of alternators designed for marine industry applications, with high reliability bearings, robust rectifiers. and other components specially designed for boats.
- Designed for marine industry applications
- High reliability bearings, robust rectifier
- Available in a wide range of alternator power upgrades
- The Balmar range of alternator power upgrades are designed specifically tomarine industry applications.
- High reliability bearings and robust rectifiers ensure your boat receives reliable power in all weather conditions.
- The 3.15 alternator " double saddle foot J10 Serpentine Pulley - 170A - 12V is perfect for boats with higher amps or larger motors
Save $116 when you purchase the Balmar 3.15" Double Foot Alternator with J10 Serpentine Pulley - 170A - 12V for only $984 from NVN Marine! Fast, free same-day delivery before 3 p.m. Balmar Alternator 3.15" Double Saddle J10 Serpentine Pulley - 170A - 12V Videos Balmar Alternator 3.15" Double Saddle J10 Serpentine Pulley - 170A - 12V Technical Specifications
| Type: | Electric | Alternators |
|---|---|
| Supplier: | Balmar |
| Weight: | 13.8 lbs |
| Voltage: | 12v |
| Intensity: | 170a |
| Product Brochure: | Download PDF |
| Shipping Weight : | 13.8 lbs |
|---|---|
| Box sizes: | 9.00 (h) x 10.00 (l) x 10.00 (l) |
| Cubic feet: | 900, 0 |
- Balmar Alternator 3.15" Double Foot Saddle Dual V Pulley Regulator and Temperature Sensor - 170A Kit - 12V
- Balmar Alternator 3.15" Double Saddle Foot Double Pulley V - 170A - 12V
- Balmar 250 AMP 12V 4" Alternator Kit Dual Saddle Foot Dual V-Pulley Regulator and Temperature Sensor
- Balmar 250 AMP 12V 3.15" Alternator Kit with K6 Dual Saddle Pulley Regulator and Temperature Sensor
- Balmar 250 AMP Alternator Kit 12V 3.15" Dual Saddle Foot J10 Pulley Regulator and Temperature Sensor
- Balmar 250 AMP 12V 3.15" Dual Saddle Alternator Kit Dual V Pulley Regulator and Temperature Sensor
- Balmar 250 AMP Alternator 12V 3.15" Double Foot K6 Pulley
