Barton Marine Laser Replica Laser Dinghy Cleat Base Sailing
Laser Dinghy Laser Replica Cleat Base Set
The Replica Cleat Bracket comes equipped with two mini K cams and our new guide design. pillar cable for easy adjustment from all angles. .
Contains:
- Wedge base with two mounting holes
- 70 mini 100 K Cam wedges x 2
- Cam pillar fairleads 70 105 K x 2
Mounting instructions:
For very old ones, you can use the original mounting holes for the alloy cleat. If not installed, position the cleat base behind the mast along the center line, measure 437mm back from the mast slot and drill a 4mm pilot hole to accept a 5mm self-tapping screw (not supplied).
Then adjust the screw without tightening. line up along the center line again; mark then drill the second fixing hole. Remove the bbase of the cleat and seal the screw holes with putty before final assembly.
Distance from the center of the 1st fixing hole to the back of the mast slot - 437 mm
Barton fittings are high quality replacements that perform the same function as the original part. They should not be confused with official parts bearing the Laser trademark. They cannot be used if you are sailing at an Association event. However, they are perfect for social sailing, sailing schools, sailing clubs or training. Laser is a registered trademark owned by Velum Limited and currently used under license in Europe by Laser Performance (Europe) Limited.
Barton Marine Equipment Limited is completely independent of Laser Performance (Europe) Limited and Velum Limited . .
The f/Laser Dinghy laser duplicating splint base assembly is equipped with two mini K cams and our newcolumn guide design, which can easily adjust any...
PRODUCT ID: 66893
SKU: NVN-66893
CSKU: CWR-66893
REWRITE: 78004-barton-marine-laser- replica-cleat-base-assembly
MPN: 98078
UPC: 5035088980789
ASIN: B076DSWJV3
WSKU:
SSKU:
KSKU:
GSKU:
MSKU :
LSKU :
NAME: Barton Marine Laser Replica Cleat Base Assembly f/Laser Dinghy
NAME_EX: BARTON MARINE REPLICA TACLE BASE ASSEMBLY FOR DINGHY LASER
PTITRE: Barton Marine Replica Laser Cleat Set base for laser dinghy
TYPE: Sailing | Blocks
SELLER: Barton Marine
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> WATERCRAFT PARTS & ACCESSORIES> SAILBOAT PARTSGoogle Title : Barton Marine Laser Replica Dinghy Cleat Base Set - 98 078
Gtags:
GSpecs:
Barton Marine Laser Replica Cleat Base Kit for Laser Canoe Product Description
Laser Replica Cleat Base Kit for Laser Canoe
The Replica Cleat Bracket comes equipped with two mini K Cams and our new pillar cable guide design for easy adjustment from all angles.
Contains:
- Cleat base with two fixing holes
- Mini cleats Cam 70 100 K x 2
- Pillar fairleads Cam 70 105 K x 2
Mounting instructions:
For very old lasers you can use the original mounting holes for the alloy flapper. If not installed, position the cleat base behind the mast along the center line, measure 437mm back from the mast slot and drill a 4mm pilot hole to accept a 5mm self-tapping screw (not supplied).
Then adjust the screw without tightening. line up againau along the midline; mark then drill the second fixing hole. Remove the cleat base and seal the screw holes with putty before final assembly.
Distance to 1st center fixing hole from rear of mast slot - 437mm
Barton fittings are high quality replacements that perform the same function as the original part. They should not be confused with official parts bearing the Laser trademark. They cannot be used if you are sailing at an Association event. However, they are perfect for social sailing, sailing schools, sailing clubs or training. Laser is a registered trademark owned by Velum Limited and currently used under license in Europe by Laser Performance (Europe) Limited.
Barton Marine Equipment Limited is completely independent of Laser Performance (Europe) Limited and Velum Limited . .
The splint base assemblyf/Laser Dinghy laser duplicator is equipped with two mini K cams and our new column guide design, which can easily adjust any...
Frequently Asked Questions (FAQ) about Barton Marine Laser Replica Cleat Base Assembly for Laser Dinghy Who is Barton Marine?
How to describe Barton Marine Laser Replica Cleat Base Assembly for laser dinghy?
Who is Barton Marine? Barton continually strives to offer the highest quality products made from high quality materials at realistic and affordable prices. New products are constantly designed and developed. Barton prides itself on the fact that over 95% of its products are manufactured in Whitstable, allowing Barton to always guarantee high quality. How to describe the Barton Marine Laser Dinghy Laser Replica Cleat Base Assembly? The base splint assembly of thelaser plication of f/Laser Dinghy is equipped with two mini K cams and our new column guide design, which can easily adjust any...
Save $27 when you purchase the Barton Marine Laser Replica Cleat Base Kit for Laser Dinghy for only $83 at NVN Marine! Same day dispatch before 3 p.m. Barton Marine Laser Replica Cleat Base Assembly f/Laser Dinghy Technical Specifications
| Type: | Sail | Blocks |
|---|---|
| Seller: | Barton Marine |
| Weight: | 0.4 lbs |
| Shipping Weight: | 0 .4 lb |
|---|---|
| Box sizesîtes: | 2.00 (h) x 4.00 (w) x 5.00 (w) |
| Cubic feet: | 40.0 |
| Returnable: | Yes |
| USPS First Class: | Yes |
For detailed shipping terms, please see our shipping policy and you can find our return and refund policy here.
- Barton Marine Laser Replica 15:1 Boom Vang Assembly f/Laser Dinghy
- Large pair of Barton Marine winchers
- Large Barton Marine winch (pair)
- Barton Marine Kevlar Cam Cleat Midi
- Barton Marine Kevlar Cam Cleat Maxi
- Barton Marine I Section 4-Wheel Control Line Sheave
- Barton Marine Heavy Duty Genoa Car for 32mm (1-1/4") T-Track
