Bennett SLT10 Self-Leveling Tab System for 17'-20' Boats Boat Outfitting

SLT Self-Leveling Tabs for Small Boats

Good things come in small packages. Now you can benefit from the durability of a Bennett trim tab system with simple, quick and easy installation. There is nothing to do inside the boat, only the assembly of two jacks and two tabs at the transom. It's a simple, affordable solution for small boats.

The SLT uses some of the same proven, high-quality materials and durable design that have been used in standard Bennett systems for over 50 years old. Your SLT kit includes:

Two sets of 14 gauge stainless steel trim tabs with Bennett's exclusive locking hinge
Two strong, flexible composite actuators
All stainless steel hardware - no plastic!
Bennett 5-year hassle-free warranty on all components

With the SLT, you can quickly get on plane and improve your shot hole, reduce engine work, improve fuel efficiency and eliminate porpoises. The SLT reacts instantly to boat speed and water pressure by adding trim when necessary. You get a better ride while the SLT does all the work.

It's unbeatable value: a quality, durable system that's quick and easy to install and backed by the best possible customer service . experience anywhere.

Tab size: 10" x 10"

Boat size: 17' - 20'

This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.ur P65Warnings.ca.gov.

SLT responds immediately to vessel speed and water pressure by adding trim as necessary. At slower speeds, when the vessel attempts to board the plane, the actuator will maintain trim... -bennett-slt10-self-leveling-tab-system-f-boats-17- 39-20-39
MPN: SLT10
UPC: 666285146804
ASIN:
WSKU: BENSLT10
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: Bennett SLT10 Self-Leveling Tab System for Boats 17'-20'
EX_NAME: BENNETT MARINE SLT10 17-20' SELF-LEVELING TABT SYSTEM
PTITRE: Self-Leveling Tab System Bennett SLT10 levelers for 17'-20' boats
TYPE: Boat fittings | Trim Tabs
SELLER: Bennett Marine
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> WATERCRAFT PARTS & ACCESSORIES
Automotive Parts & Accessories
Bennett Marine Bennett SLT10Self-Leveling Tab System - 10" x 10"
Bennett SLT10 Self-Leveling Tab System for 15'-18' Boats - SLT10
Automotive Parts & Accessories
Gtags :

GSpecs:

Bennett SLT10 Self-Leveling Tab System for 17'-20' Boats Product Description

SLT Self-Leveling Tabs for Small Boats

Good things come in small packages . Now you can benefit from the durability of a Bennett trim tab system with simple, quick and easy installation. There is nothing to do inside the boat, only the assembly of two jacks and two tabs at the transom. It's a simple, affordable solution for small boats.

The SLT uses some of the same proven, high-quality materials and durable design that have been used in standard Bennett systems for over 50 years old. Your SLT kit includes:

Two sets of 14 gauge stainless steel trim tabs with Bennett's exclusive locking hinge
Two strong, flexible composite actuators
All stainless steel material- no plastic!
Hassle-free Bennett 5-year warranty on all components

With the SLT, you can get on the plane quickly and improve your hole firing, reduce engine work, improve fuel efficiency and eliminate porpoises. The SLT reacts instantly to boat speed and water pressure by adding trim when necessary. You get a better ride while the SLT does all the work.

It's unbeatable value: a quality, durable system that's quick and easy to install and backed by the best possible customer service . experience anywhere.

Tab size: 10" x 10"

Boat size: 17' - 20'

WARNING:This product can expose you to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit

SLT responds immediately to vessel speed and water pressure by adding trim as necessary. At slower speeds, when the vessel attempts to board the plane, the actuator will maintain trim...

Bennett SLT10 Self-Leveling Tab System for Boats 17 '-20' Related ProductsTecnoseal R1 Rudder Anode - Zinc - 1-7/8" Diameter
Tecnoseal R2 Rudder Anode -Zinc - 2-13/16" Diameter
Tecnoseal R3 Rudder Anode - Zinc - 3-3/4" diameter
Tecnoseal R1AL Rudder Anode - Aluminum - 1-7/8" diameter
Tecnoseal R2AL Rudder Anode - Aluminum - 2-13/16" diameter
Tecnoseal R3AL rudder anode - Aluminum - 3-3/4" diameter
Tecnoseal R1MG rudder anode - Magnesium - 1-7/8" diameter
Tecnoseal R2MG rudder anode - Magnesium - 2-13/16" diameter
Tecnoseal R3MG rudder anode - Magnesium - 3-3/4" in diameter
Bennett Tecnoseal TEC-BNT Fin Anode - Zinc - Pair

Frequently asked questions (FAQ) about the Bennett SLT10 self-leveling tab system for boats 17 '-20' Who is Bennett Marine?
How to describe the Bennett SLT10 Self-Leveling Tab System for 17'-20' boats?
What is the construction of the product?
Who is the Bennett Marine? Since 1960, Bennett Marine has been the world leader in trimmer technology. The name Bennett Marine has become synonymous with quality product and exceptional customer service. around the boatyard, ask your friends, check what the best boat builders are installing, we are confident that the best choice will be Bennett Marine How to describe the Bennett SLT10 Self Leveling Tab System for. boats 17'-20'? The SLT reacts immediately to vessel speed and water pressure by adding trims if nnecessary. At slower speeds, when the vessel attempts to board the aircraft, the actuator will maintain trim... What is the construction of the product? Stainless Steel

Save $54 when you purchase the Bennett SLT10 Self-Leveling Tab System for 17'-20' Boats for only $121 from NVN Marine! Same day dispatch before 3 p.m. Bennett SLT10 Self-Leveling Tab System for 17'-20' Boats Videos Bennett SLT10 Self-Leveling Tab System for 17'-20' Boats Technical Specifications

Type:	Boat outfitter \| Compensating tabs
Supplier:	Bennett Marine
Weight:	8.8 lbs
Construction:	Stainless steel
User Guide:	Download PDF
Product installation:	Download PDF

Bennett SLT10 Self-Leveling Tab System for 17' to 20' Boats User ReviewsBennett SLT10 System of Self-Leveling Tabs for 17'-20' Boats Shipping & Returns

Shipping Weight:	8.8 lbs
Box sizes:	4.00 (h) x 10.00 (w) x 11.00 (w)
Cubic feet:	440.0
Returnable:	Yes
P65:	Yes