Bennett Trim Tab Kit 24" x 12" without order Boat Outfitting

Bennett Trim Tabs are proudly designed and manufactured at the Bennett Marine factory in Deerfield Beach, Florida. Each Bennett system carries with it an accumulation of nearly 40 years of research, development and testing and is designed to provide years of reliable service.

Each trim tab is sheared and bent, not welded. Welding changes the properties of stainless steel, which promotes corrosion. Bennett actuators feature through-hull hydraulics. There are no external pipes vulnerable to rot. Additionally, each hydraulic power unit is tested by both a person and a computer to ensure that this reliable unit deflects the trim tabs, holds securely during use, and retracts smoothly.

Standard Trim Tab Kit

This product can expose you to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. more information, visit P65Warnings.ca.gov

Bennett Decorative Sheet is proudly designed and manufactured at the Bennett Marine factory in Deerfield Beach, Florida. , developed and tested for almost 40 years, aiming to provide years of reliable service. Each decorative piece is cut and bent, not welded. Welding can change the properties of stainless steel, leading to corrosion. The Bennett actuator has a hydraulic system that runs through the hull. There are no hoses.external parts sensitive to corrosion. In addition, each hydraulic power unit has been tested by humans and computers to ensure that the reliable unit can deflect the decorative sheet, fix it firmly and retract stably during use.l The kit is ideal for cruisers who want to optimize performance in various sea conditions. The kit contains all components required for installation.
PRODUCT ID: 16879
SKU: NVN-16879
CSKU: CWR-16879
REWRITE: 27990-bennett-trim-tab-kit-24-x-12
MPN: 2412
br> UPC: 666285125533
ASIN: B00GOPHM74
WSKU: BEN2412
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: Bennett Trim Tab Kit 24" x 12" without control
NAME_EX: BENNETT MARINE 24 Trim Tabs
SELLER: Bennett Marine
VEHICLES & PARTSS> VEHICLE PARTS & ACCESSORIES> WATERCRAFT PARTS & ACCESSORIES
Sports

Bennett Trim Tab Kit Without Control, 24" x 12"
Sports
Gtags:

GSpecs:

Bennett 24" x 12" Non-Control Trim Tab Kit Product Description Bennett trim tabs are proudly designed and manufactured at the Bennett Marine factory in Deerfield Beach, Florida. Each Bennett system carries with it an accumulation of nearly 40 years of research, development and testing and is designed to provide years of reliable service.

Each trim tab is sheared and bent, not welded. Welding changes the properties of stainless steel, which promotes corrosion. Bennett actuators feature through-hull hydraulics. There are no external pipes vulnerable to rot. Additionally, each hydraulic power unit is tested by both a person and a computer to ensure that this reliable unit deflects the trim tabs, holds securely during use, and retracts smoothly.

Standard trim tab kit

This product can expose you to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information,

Bennett Decorative Sheet is proudly designed and manufactured at the Bennett Marine Factory in Deerfield Beach, Florida. Each Bennett system has been researched, developed and tested for nearly 40 years, aiming to provide years of reliable service. Each decorative piece is cut and folded, not welded. Welding can change the properties of stainless steel, leading to corrosion. The Bennett actuator has a hydraulic system that worksrse the hull. There are no external pipes susceptible to corrosion. Additionally, each hydraulic power unit has been tested by humans and computers to ensure that the reliable unit can deflect the decorative sheet, secure it firmly, and retract steadily during use. Standard Interior Panel Set Standard Interior Panel Set Bennett is ideal for cruisers who want to maximize performance in a variety of sea conditions. The kit contains all components required for installation.

Bennett 24" x 12" daggerboard kit without control Related productsTecnoseal R1 rudder anode - Zinc - 1-7/8" diameter
Tecnoseal R2 rudder anode - Zinc - 2- 13 /16" diameter
Tecnoseal R3 rudder anode - Zinc - 3-3/4" diameter
Tecnoseal R1AL rudder anode - Aluminum - 1-7/8" diameter
Tecnoseal R2AL Rudder Anode - Aluminum - 2-13/16" Diameter
AnoTecnoseal R3AL Rudder Anode - Aluminum - 3-3/4" diameter
Tecnoseal R1MG Rudder Anode - Magnesium - 1-7/8" Diameter
Tecnoseal R2MG Rudder Anode - Magnesium - 2- 13/16" diameter
Tecnoseal R3MG Rudder Anode - Magnesium - 3-3/4" diameter
Tecnoseal TEC-BNT Bennett Trim Tab Anode - Zinc - Pair

Frequently Asked Questions (FAQ) about Bennett 24" x 12" No Control Trim Tab Kit Who is Bennett Marine?
How do I describe the Bennett 24" x 12" No Control Trim Kit?
What is the construction of the product?
What is the actuator type?
Who is Bennett Marine? Since 1960, Bennett Marine has been the world leader in trimmer technology. The Bennett Marine name has become synonymous with quality product and exceptional customer service. Look around the boatyard, ask your friends, check what the best boat builders are installing, weWe are convinced that the best choice will be Bennett Marine. How to describe the Bennett 24" x 12" Fin Kit with /o Control? Bennett Decorative Sheet is proudly designed and manufactured at the Bennett Marine factory in Deerfield Beach, Florida. Each Bennett system has been researched, developed and tested for nearly 40 years, aiming to provide years of reliable service. Each decorative piece is cut and folded, not welded. Welding can change the properties of stainless steel, leading to co-corrosion. The Bennett actuator has a hydraulic system that runs through the hull. There are no external pipes susceptible to corrosion. Additionally, each hydraulic power unit has been tested by humans and computers to ensure that the reliable unit can deflect the decorative sheet, secure it firmly, and retract steadily during use. Standard interior panel kit The breakdown kitwith standard interiors Bennett is ideal for cruisers who want to optimize performance in various sea conditions. The kit contains all the components necessary for installation. What is the construction of the product? Stainless Steel

$267

Trim Bennett 24" x 12" No Order Tab Kit

$544

Type:	Boat Equipment \| TORim Tabs
Seller:	Bennett Marine
Weight:	34.0 lbs
Construction:	Steel stainless
Actuator type:	Hydraulic
User Guide:	DownloadView PDF
Product Manual:	Download PDF
Product Installation:	Download PDF

34.0 lbs

5.00 (h ) x 15.00 (l)

Yes

For more shipping policy details, please see our shipping policy and you can find our return and refund policy here.