Bennett Trim Tab Kit 72" x 12" with Dual 12V Actuators No Control Switch Boat Outfitting
Bennett Trim Tabs are proudly designed and manufactured at the Bennett Marine factory in Deerfield Beach, Florida. Each Bennett system carries with it an accumulation of nearly 40 years of research, development and testing and is designed to provide years of reliable service.Each trim tab is sheared and bent, not welded. Welding changes the properties of stainless steel, which promotes corrosion. Bennett actuators feature through-hull hydraulics. There are no external pipes vulnerable to rot. Additionally, each hydraulic power unit is tested by both a person and a computer to ensure that this reliable unit deflects the trim tabs, holds securely during use, and retracts smoothly.
Standard Trim Tab Kit
This product can expose you to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. more information, visit P65Warnings.ca.gov
Bennett Trim Tabs are proudly designed and manufactured in the Bennett Marine factory in Deerfield Beach, Florida. , developed and tested for almost 40 years, aiming to provide years of reliability. Each decorative part is cut and bent, then welded. Welding can change the properties of the stainless steel, leading to corrosion. hydraulic that passes through the hull is easily damaged. Each hydraulic power unit has been tested.by humans and computers to ensure the reliable unit can deflect the decorative sheet, hold it firmly and retract smoothly during use
PRODUCT ID: 16889
SKU: NVN-16889
CSKU : CWR-16889
REWRITE: 28000-bennett-trim-tab-kit-72-x-12
MPN: 7212
UPC: 666285139509
ASIN: B004KNG8VI
WSKU: BEN7212
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: Bennett 72" x 12" Trim Tab Kit with 12V Dual Actuators, No Control Switch
br> NAME_EX: TRIM BENNETT MARINE 72 Trim Tabs
SELLER: Bennett Marine
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> WATERCRAFT PARTS & ACCESSORIES Bennett Trim Tab Kit 72" x 12" with 12V Dual Actuators, No Control Switch
Gtags:
GSpecs:
Bennett 72" x 12" Trim Tab Kit with 12V Dual Actuators, No Control Switch Product Description Bennett trim tabs are proudly designed and manufactured at the Bennett Marine factory in Deerfield Beach, Florida. Each Bennett system carries with it an accumulation of nearly 40 years of research, development and testing and is designed to provide years of reliable service.
Each trim tab is sheared and bent, not welded. Welding changes the properties of stainless steel, which promotes corrosion. Bennett actuators feature through-hull hydraulics. There are no external pipes vulnerable to rot. Additionally, each hydraulic power unit is tested by both a person and a computer to ensure that this reliable unit deflects the trim tabs, holds securely during use, and retracts smoothly.
STA trim tab kitndard
This product can expose you to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information,
Bennett Trim Tabs are proudly designed and manufactured at the Bennett Marine factory in Deerfield Beach, Florida. Each Bennett system has been researched, developed and tested for nearly 40 years, aiming to provide years of reliable service. Each decorative piece is cut and folded, then welded. Welding can change the properties of stainless steel, leading to corrosion. The actionneur Bennett has a hydraulic system that runs through the hull. The outer pipe is easily damaged. Additionally, each hydraulic power unit has been tested by humans and computers to ensure that the reliable unit can deflect the decorative sheet, hold it firmly, and retract smoothly during use.
Bennett 72" x 12" Trim Tab Kit with 12V Dual ActuaTors, without Control Switch Related ProductsTecnoseal R1 Rudder Anode - Zinc - 1-7/8" Diameter
Anode Tecnoseal R2 rudder - Zinc - 2-13/16" diameter
Tecnoseal R3 rudder anode - Zinc - 3 -3/4" diameter
Tecnoseal R4 rudder anode - Zinc - 5" diameter x 5/8" thick
Tecnoseal R1AL Rudder Anode - Aluminum - 1-7/8" Diameter
Tecnoseal R2AL Rudder Anode - Aluminum - 2-13/16" Diameter
/>Tecnoseal R3AL Rudder Anode - Aluminum - 3-3/4" Diameter
Studder Anodeil Tecnoseal R4AL - Aluminum - 5" x 5/8"
Tecnoseal R1MG rudder anode - Magnesium - 1-7/8" diameter
Tecnoseal R2MG rudder anode - Magnesium - 2-13/16 " in diameter
Frequently Asked Questions (FAQ) About the Bennett 72" x 12" Fin Kit with 12V Dual Actuators, without Control Switch Who is Bennett Marine?
How to describe the Bennett 72" x 12" Drift Kit with 12V Dual Actuators, No Control Switch?
What is it? Product Construction?
What is the type actuator?
Who is Bennett Marine? Since 1960, Bennett Marine has been the world leader in trimmer technology. The Bennett Marine name has become synonymous with quality product and exceptional customer service. Look around the boatyard, ask your friends, check what the best boat builders are installing, we are confident that the best choice will be Bennett Marine. Howt describe the Bennett 72" x 12" Fin Kit with /Dual 12V Actuators, No Control Switch? Bennett Trim Tabs are proudly designed and manufactured in the Bennett Marine factory in Deerfield Beach, Florida. Each Bennett system has been researched, developed and tested for nearly 40 years, aiming to provide years of reliable service. Each decorative piece is cut and folded, then welded. Welding can change the properties of stainless steel, leading to corrosion. The Bennett actuator has a hydraulic system that runs through the hull. The post internal pipe is easily damaged. Additionally, each hydraulic power unit has been tested by humans and computers to ensure that the reliable unit can deflect the decorative sheet, hold it firmly, and retract smoothly during use. What is the construction of the product? Stainless steel
- What is the type ofactuator? Hydraulics
Save $422when you purchase the Bennett 72" x 12" Trim Tab Kit with 12V Dual Actuators, No Control Switchfor only $1,179from NVN Marine! Same day dispatch before 3 p.m. Bennett 72" x 12" Trim Tab Kit with 12V Dual Actuators, No Control Switch Technical Specifications
| Type: | Boat Equipment | Compensating tabs |
|---|---|
| Seller: | Bennett Marine |
| Weight: | 97.0 lbs |
| Construction: | Stainless steell |
| Actuator type: | Hydraulic |
| User Guide: | Download PDF |
| Product Manual: | Download PDF |
| Product installation: | Download PDF |
97.0 lbs
5.00 (h) x 15.00 (w) x 72.00 (w) )
5,400.0
Yes
Yes
Yes
For detailed shipping terms, please see our shipping policy and you can find our return and refund policy here.
- Bennett Trim Tab Kit 66" x 12" without order
- Bennett Trim Tab Kit 66" x 12" with Euro Toggle Switch
- Bennett Trim Tab Kit 60" x 12" Without Control
- Bennett Trim Tab Kit 60" x 12" with Euro Toggle Switch
- Bennett Trim Tab Kit 54" x 9" without order
- Bennett Trim Tab Kit 54" x 9" with Euro Toggle Switch
- Bennett Trim Tab Kit 54" x 12" without order
