BEP Contour battery switch - 275 A continuous Electrical

This switch offers a number of unique features, the highlight being the patented Contour Locking System, allowing it to be a standalone unit or interlocked with other switches. The control knob can be removed by moving to a 45 degree counterclockwise position. This control button also features an interchangeable labeling system allowing for a full range of applications. Three removable side plates provide access to up to 1/0 cables. The rear cover insulates the rear terminals against any short circuits. This ensures that the switch meets ABYC requirements. Test procedures for BEP (UL 1107) marine battery switches continuous (1 hour), intermittent (5 minutes), and cranking (engine starting - 10 seconds). The test involves determining the maximum current the switch can handle for the specified time, without the rear terminals exceeding 100 degRes Celsius (212 degrees Fahrenheit) above room temperature. Continuous and intermittent ratings are tested at 110 percent of specified values.

BEP Marine 701 Attributes

Type: Key
Activation Type: Manual
Continuous Ampere Rating (A): 275 A
Surge Current Rating (A): 1250 A
Installation Type: Bolt-on

BEP Marine 701 Features and Benefits

Tin plated copper studs and nuts
Protected against ignition
Can be surface mounted or recessed by cutting a 2.1 inch hole
Please note that the selectors will not separate the electronics from harmful motor starting spikes
The patented contour lock system allows the switch to be a standalone unit or interlock with other switches
The control knob can be removed by turning 45 degrees counterclockwisetre
Three removable side plates for access to cables up to 1/0 plus a rear cover insulating the rear terminals against any short circuit
2 year limited warranty

BEP Marine 701 Installation Instructions

Instructions_701.pdf

Contour Mini Battery Disconnect Switch - 275 A Continuous

This switch offers a number of unique features, the highlight being the Contour Locking System, allowing it to be a standalone unit, or interlocked with other switches. The control knob can be removed by moving to a 45 degree counterclockwise position. This control button also features an interchangeable labeling system allowing for a full range of applications (item no. 713 or 715). Three removable side plates provide access to up to 1/0 cables. The rear cover insulates the rear terminals against anyshort circuit. This ensures that the switch meets ABYC requirements. Test procedures for BEP (UL 1107) marine battery switches continuous (1 hour), intermittent (5 minutes), and cranking (engine starting - 10 seconds). The test involves determining the maximum current the switch can handle for the specified time, without the rear terminals exceeding 100°C (212°F) above ambient temperature. The continuous and intermittent ratProducts are tested at 110% of specified nominal values. All BEP switches are independently tested to this specification by a third party laboratory.

Features:

Can be surface mounted or recessed by cutting a 2.1 " Hole (52 mm)
Available with house button (OEM # 701B-HB) or with chassis button (OEM # 701B-CH)
Tin-plated copper studs and nuts
Protected against ignition

CThis product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to P65Warnings.ca.gov.

The contour 701 battery. The main switch has many unique functions. The highlight is the patented contour lock system, which can make it a standalone device or lock...
PRODUCT ID: 60032
SKU: NVN-60032
CSKU: CWR-. 60032
REWRITE: 71143-bep-contour-battery-disconnect-switch-275a
MPN: 701
UPC: 870216000015
ASIN: B005DUUL9W
WSKU: BEP701
SSKU:
KSKU: B7V701
GSKU:
MSKU: 777042
LSKU: 969-701
NAME: BEP Contour Battery Switch - 275A continuous
NAME_EX: BEP BATTERY SWITCH 275A CONTINUOUS
PTITLE: BEP Contour Battery disconnect switch - 275A continuous
TYPE: Electric | Battery Management
SELLER:BEP Marine
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> POWERWATER PARTS & ACCESSORIES
Sports
BEP Battery Switches
Bep Battery Switches Contour 275a Continuous by Hodges Marine
Sports
Gtags:

Switch
Safety switch

GSpecs:

BEP Contour Battery Switch - 275 Amp Continuous Product Description

This switch offers a number of unique features, the highlight being the patented Contour locking system, allowing it to be a standalone unit or interlocked with others switches. The control knob can be removed by moving to a 45 degree counterclockwise position. This control button also features an interchangeable labeling system allowing for a full range of applications. Three removable side plates provide access to up to 1/0 cables. The rear cover insulates the rear terminals against any short circuits. This ensures that the switch meets ABYC requirements. Test procedures for BEP (UL 1107) marine battery switches continuous (1 hour), intermittent (5 minutes), and cranking (engine starting - 10 seconds). The test involves determining the maximum current the switch can handle fort the specified time, without the rear terminals exceeding 100 degrees Celsius (212 degrees Fahrenheit) above ambient temperature. ContinuedNominal or intermittent values are tested at 110% of specified values.

BEP Marine 701 Attributes

Type: Key
Activation type: Manual
Continuous ampere rating (A): 275 A
Rated surge current (A): 1250 A
Installation Type: Bolted

BEP Marine 701 Features and Benefits

Tin-Plated Copper Studs and Nuts
Protected against ignition
Can be surface mounted or flush mounted by cutting a 2.1 inch hole
Please note that the selectors will not separate the electronics from the harmful engine starting spikes
Patented contour locking system Allowsswitch to be a standalone unit or interlocked with other switches.
The control knob can be removed by switching 45 degrees counterclockwise.
Three removable side plates for upward access. To 1/0 cables plus a rear cover insulating the rear terminals against any short circuit
2 year limited warranty

BEP Marine 701 Installation Instructions

Instructions_701.pdf

Contour Mini Battery Disconnect Switch - 275 Amp Continuous

This switch offers a number of unique features, the highlight being the Contour Locking System, allowing it to be a standalone unit or interlocked with other switches. The control knob can be removed by moving to a 45 degree counterclockwise position. This control button also has a labeling system iInterchangeable allowing a full range of applications (item no. 713 or 715). Three removable side plates provide access to up to 1/0 cables. The rear cover insulates the rear terminals against any short circuits. This ensures that the switch meets ABYC requirements. BEP (UL 1107) Marine Battery Switch Test Procedures Continuous (1 hour), Intermittent (5 minutes) and Cranking (engine starting - 10 seconds). The test involves determining the maximum current the switch can handle for the specified time, without the rear terminals exceeding 100°C (212°F) above ambient temperature. Continuous and intermittent ratings are tested to 110% of specified ratings. All BEP switches are independently tested to this specification by a third party laboratory.

Features:

Can be surface mounted or recessed by cutting a 2.1 " Hole (52 mm)
Availablethe with house knob (OEM # 701B-HB) or with sash knob (OEM # 701B-CH)
Tin-plated copper studs and nuts
Protected against ignition

This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp), known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to P65Warnings.ca.gov.

The contour 701 battery. The main switch has many unique functions. The highlight is the patent.Contour d lock system, which can make it a standalone device or lock...

BEP Contour Battery Disconnect Switch - 275A Continuous Related ProductsBattery Cable Ancor black 2 AWG - 25'
Ancor red 2 AWG battery cable - 25'
Ancor black battery cable 2/0 AWG - 100'
Ancor red battery cablege 2/0 AWG - 100'
Ancor Heavy Duty Terminals - 2 Gauge Wire - 3/8" Post - 2-Pack
Ancor Heavy Duty Terminals - 2 Gauge Wire - 3/8" Post - 25-Pack
Ancor Heavy Duty Terminals - 1 Gauge Wire - 3/8" Post - 2 -Pack
Ancor Heavy Duty Terminals - 1 Gauge Wire - 3/8" Post - Pack of 25
Ancor Heavy Duty Lugs - 1/0 Gauge Wire - 3/8" Post - Pack of 2
Ancor Heavy Duty Lugs - 1/0 Gauge Wire - 3/8" Post - Pack of 25

Frequently asked questions (FAQ) about the BEP Contour - 275 A continuous battery disconnector what is the BEP Marine?
How to describe the BEP Contour - 275 A battery disconnector in continuous?
What is the operating voltage of the product?
What is the type of the product?
What is the weight of the product?
What is the size?
Who is the BEP Marine? BEP designs and manufactures a range of high quality electrical solutions designed for harsh marine and motorhome environments. Each productmanufactured meets rigorous performance specifications and is designed to withstand conditions at sea and on land. BEP engineers and product managers continue to develop the next generation of energy management products. How to describe the BEP Contour battery disconnector - 275 A continuous? The contour 701 main battery switch has many unique functions. The highlight is the patented contour lock system, which can make it a standalone device or lock... What is the working voltage of the product? 6-48 What is the type of product? KeyHow heavy is the product? 0.02What is the size? 2-3/4" x 2-3/4" x 3"

Save $15 on the purchase of the BEP Contour Battery Disconnect - 275 A continuous for only $24 from NVN Marine Same day shipping before 3pm BEP Contour Battery Switch - 275A Technical specifications continuous.

Type:	Electric \| Battery management
Supplier:	BEP Marine
Weight:	0.5 lbs

BEP Contour Battery Disconnect Switch - 275 Amp Continuous User ReviewsBEP Contour Battery Disconnect Switch - 275A Continuous Shipping & Returns

Shipping Weight:	0.5 lbs
Box sizes:	3.00 (h) x 4.00 (w) x 6.00 (w)
Cubic feet:	72.0
Returnable:	Yes
USPSt Trees Class:	Yes
P65:	Yes