Blue Sea 3003 HD Series Battery Switch Selector with Alternator Field Disconnect Electrical

Battery disconnect switches isolate potentially destructive energy from battery banks when the boat is not in use or in an emergency. Switches isolated battery groups to all loads or combines battery groups with all loads.

Blue Sea 3003BSS Attributes

Used for: Switching isolated battery groups to all loads/ To combine battery groups with all loads
Number of positions: 4
Battery input: 2 batteries
Rated voltage: 32 volts
li>
Amperage Rating: 700 Intermittent Amps and 500 Amps Continuous Rating
Color: Black
With Alternator Field Disconnect: Yes
With ignition protection: Yes

Blue Sea 3003BSS Features and Benefits

Make-before-break contact design allows switching between battery banks without power interruption
Accepte two 4/0 AWG battery cables
Tinned copper studs for maximum conductivity and corrosion resistance
Tactile indicator shows button position by touch
Water resistant - IP66 rating against water thrown in powerful jets
Housing design allows for surface, rear or front panel mounting options
Protected against ignition - safe for installation on board gasoline boats
2 year limited warranty

Blue Sea installation instructions 3003BSS

3001_web_version.pdf

Blue Sea Technical Bulletins 3003BSS

all-switches.pdf
6832-003-BatterySwitches-web. pdf
6832-003-BatterySwitches-web.pdf

HD 3003 Series Battery Switch Selector with Alternator Field Disconnect

Features:

500 amp continuous rating
Accepts 4/0 battery cables
Protected ignition - safe for installation aboard gas-powered boats
0.870" (22.01mm) stud length for accept 4 or more cable terminals
1/2" (M12) tin-plated copper studs for maximum conductivity and corrosion resistance
Meets American Boat and Yac HT requirements Council (ABYC) for Battery Switches
Tactile textures indicate button position only by touch
Housing design allows surface or back panel mounting
Fits all Perko and Guest Low Amperage Battery Switch Hole Models

This product may expose you to chemicals including di(2-ethylhexyl) phthalate (dehp), known to the State of California to cause cancer, birth defects, or other reproductive harm.For information,

These Blue Sea Systems four-position battery disconnect switches can provide 500 amps of current for large diesel engines. These switches can switch the isolated battery pack on all loads, or combine the battery pack on all loads, and feature tin-plated copper studs for maximum conductivity and corrosion resistance. The stud accepts 1/2" (M12) ring terminals and has a stud length of 7/8" (22mm) which can accommodate multiple cable lugs. Accepts battery cables up to 4/0 AWG. Mer Bleue SThe system's one-piece terminal design will not loosen over time. One-piece stainless steel flange nuts ensure a secure and reliable connection. Fits most Perko and Guest low current battery switch hole styles. Chassis design allows for surface or rear panel mounting options. IndiTactile cation communicates the position of the button by tactile sensation. The 5444 includes an AC generator field isolation switch (AFD), which protects the alternator diode when the switch is turned OFF while the engine is running. If you are not using the AFD to protect the alternator, you can connect an LED to the AFD terminal to indicate when the battery switch is in any position other than OFF.
PRODUCT ID: 20234
SKU: NVN-20234
CSKU: CWR-20234
REWRITE: 31345-blue-sea-3003-hd-series-battery-switch-selector
MPN: 3003
UPC: 632085030032
ASIN: B000K2K5PI
WSKU: BSS3003
SSKU: BS-3003
KSKU: B6Z3003BSS
GSKU:
MSKU:
LSKU:
NAME: Blue Sea 3003 Switch Selector HD Series Battery with Alternator Field Disconnect
NAME_EX: BLUE SEA 3003 BATTERY SWITCH HD AF SELECTOR
PTITLE: Blue Sea 3003 HD Series Battery Switch Selector with Alternator Field Disconnectalternator field
TYPE: Electric | Battery Management
SELLER: Blue Sea Systems
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> WATERCRAFT PARTS & ACCESSORIES

Blue Sea Systems HD- Series Heavy Duty Battery Switch
Blue Sea 3003 HdSeries Battery Switch Selector WAlternator Field Dis by Hodges Marine

Gtags:

GSpecs:

Blue Sea 3003 HD Series Battery Switch Selector with Alternator Field Disconnect Product Description

Battery switches isolate potentially destructive energy from battery banks when the boat is not in use or in the event of 'emergency. Switches isolated battery banks to all loads or combines battery banks with all loads.

Blue Sea 3003BSS Attributes

Used for: Switch Isolated battery banks at all loads/For combining battery banks at all loads
Number of positions: 4
Battery input: 2 batteries
Rated voltage: 32 volts
Amperage rating: 700A intermittent current rating and 500A continuous current rating
Color: Noir
With disconnection of the alternator field: Yes
With protection against 'ignition: Yes

Mer BleueFeatures and advantages of the 3003BSS

The design of the contacts to be established before switching off allows switching between groups of batteries without power interruption
Accepts two 4/0 AWG battery cables
Sealed Copper studs for maximum conductivity and corrosion resistance
L Tactile indicator shows button position by touch
Waterproof – IP66 rated from water sprayed in powerful jets
Housing design allows surface mounting options on front, rear or front panel
Protected against ignition - safe installation on board gasoline boats
2 year limited warranty

Operating instructions installation of Blue Sea 3003BSS

3001_web_version.pdf

Bulletins teBlue Sea 3003BSS chniques

all-switches.pdf
6832-003-BatterySwitches-web.pdf
6832-003-BatterySwitches-web.pdf

HD 3003 Series Battery Switch Selector with Alternator Field Disconnect

Features:

Conti 500 ampsNu rating
Accepts 4/0 battery cables
Protected ignition - safe for use installation on board gasoline boats
0.870" (22.01 mm) stud length to accept 4 or more cable terminals
1/2" (1/2") tinned copper studs M12) for maximum conductivity and corrosion resistance
Meets American Boat and Yacht Council (ABYC) battery disconnect requirements
Tactile textures indicate button position only by touch
Housing design allows for surface or rear panel mounting
Fits all models of trou for Perko and Guest Low Amperage Battery Switch
li>

This product can expose you to chemicals, including phthalate di(2-ethylhexyl) (dehp), known to the State of California to cause cancer and birth defects. or other reproductive problems. For more information,

These Blue Sea Systems four-position battery disconnect switches can provide 500 amps of current for large diesel engines. These switches can switch the isolated battery to all loads, or combine the battery to all loads and feature tin-plated copper studs for maximum conductivity and corrosion resistance. The stud accepts 1/2" (M12) ring terminals and has a stud length of 7/8" (22mm) which can accommodate multiple cable lugs. Accepts battery cables up to 4/0 AWG. The design of the mo terminalBlue Sea Systems nobloc will not loosen over time. One-piece stainless steel flange nuts ensure a secure and reliable connection. Fits most Perko and Guest low current battery switch hole styles. Chassis design allows for surface or rear panel mounting options. The tactile indicator communicates the button position by tactile sensation. The 5444 includes an AC generator field isolation switch (AFD), which protects the alternator diode when the switch is turned OFF while the engine is running. If you are not using the AFD to protect the alternator, you can connect an LED to the AFD terminal to indicate when the battery switch is in a position other than OFF.

Blue Sea 3003 HD Series Battery Switch Selector with Alternator Field Disconnect Related ProductsBlue Sea 7902 Icon Circuit Identification Label Kit for combattery mutators
Ancor Red 4 AWG Battery Cable - Sold by the foot
Ancor Red 2 AWG Battery Cable - Sold by the foot
Ancor Red 1 AWG Battery Cable - Sold by the foot
Ancor Red 1/0 AWG Battery Cable - Sold by the Foot
Ancor Red 2/0 AWG Battery Cable - Sold by the Foot
Ancor Heavy Duty Lugs - 4 Gauge Wire - 1/2" Post - Pack of 2
Ancor heavy-duty lugs - 2 gauge wire - 1/2" post - Pack of 2
Ancor heavy-duty lugs - 1/0 gauge wire - 1/2" post - Pack of 2
Ancor Heavy Duty Terminals - 2/0 Gauge Wire - 1/2" Post - Pack of 2

Frequently Asked Questions (FAQ) about Switch Selector Blue Sea 3003 HD-Series Battery with Alternator Field Disconnect Who is Blue Sea Systems?
How to describe the Blue Sea 3003 HD-Series Battery S Witch Selector with Alternator Field Disconnect?
What positions exist in this product?
What is the ccolor of the Blue Sea 3003 HD-Series Battery Switch Selector with Alternator Field Disconnect?
Does this switch have an alternator field disconnect option?
br/>Who is Blue Sea Systems? Blue Sea Systems is committed to improving marine electrical products and systems, such as panel systems, circuit breakers, connectors and insulators. Blue Sea aims to satisfy its distributors, resellers and ultimately its retail customers by designing and manufacturing electrical products designed to withstand the rigors of the marine environment. How to describe the Blue Sea 3003 HD Series Battery Switch Selector with Alternator Field Disconnect? These Blue Sea Systems four-position battery disconnect switches can provide 500 amps of current for large diesel engines. These switches can switch the isolated battery pack to all loads, or combine thebattery pack to all loads, and have copper studs for maximum conductivity and corrosion resistance. The stud accepts 1/2" (M12) ring terminals and has a stud length of 7/8" (22mm) which can accommodate multiple cable lugs. Accepts battery cables up to 4/0 AWG. The one-piece design of the Blue Sea Systems terminal will not loosen over time. One-piece stainless steel flange nuts ensure a secure and reliable connection. Fits most Perko and Guest low current battery switch hole styles. Chassis design allows for surface or rear panel mounting options. The tactile indicator communicates the button position by tactile sensation. The 5444 includes an AC generator field isolation switch (AFD), which protects the alternator diode when the switch is turned OFF while the engine is running. If you do not usenot the AFD to protect the alternator, you can connect an LED to the AFD terminal to indicate when the battery switch is in a position other than OFF. What positions exist in this product? 4What is the color of the Blue Sea 3003 HD Series Battery Switch Selector with Alternator Field Disconnect? BlackDoes this switch have an alternator field disconnect option? Yes

Save $89 when you purchase the Blue Sea 3003 HD Series Battery Switch Selector with Alternator Field Disconnect for only $67 from NVN Marine! Same day dispatch before 3 p.m. Blue Sea 3003 HD Series Battery Switch Selector with Alternator Field Disconnect Technical Specifications

Type:	Electric \| Battery Management
Vendor:	Blue Sea Systems
Poids:	1.3 lbs
Positions:	4
AFD:	Yes
Continuous intensity:	700a
Mamanuel product:	Download the PDF

Blue Sea 3003 HD Series Battery Switch Selector with Alternator Field Disconnect User ReviewsBlue Sea 3003 HD Series Battery Switch Selector with Alternator Field Disconnect 'alternator Shipping & Returns

Shipping Weight:	1.3 lbs
Box sizes:	3.00 (h) x 7.00 (w) x 9.00 (w)
Cubic feet:	189.0
Returnable:	Yes
P65:	Yes

For detailed shipping terms, please review our shipping policy and you canFind our returns and refund policy here.