Blue Sea 7039 - 50 Amp Circuit Breaker Panel Mount 187 Series Electrical
Circuit breakers protect the wires of electrical circuits. Blue Sea Systems' wide range of magnetic and thermal circuit breakers includes a wide selection of main and branch circuit protection devices. Their rugged design makes them ideal for marine and vehicle AC and DC electrical systems. Thermal circuit breakers provide heavy-duty circuit protection for loads from 25 to 200 A when both switching and circuit protection are required.
Blue Sea 7039BSS Attributes- Amperage rating: 50 A
- Voltage Rating: 48 Volts
- Reset Type: Manual
- Terminal Connection: Screw
- Type: Thermal
- Quantity: Single
- Estimated installation time (hours): 0.25
- Combines switching and circuit protection in one device
- Waterproof. Classic operationsingle lever ir
- Ample clearance around terminal studs accepts heavy gauge wire lugs
- Heavy duty terminals provide high torque than Connections
- The visible yellow reset lever indicates an open condition
- Meets SAE J1171 external ignition protection requirements
- Tripless design cannot be held "ON" during an open condition of fault current
- Protected against ignition - Safe for installation on board gasoline boats
- Large lever with vertical or horizontal orientation provides indication of the fault travel status; Flush mounting holes for a clean appearance
- No supplier warranty
Blue Sea Systems 187 Series Circuit Breaker - 50A Panel Mount
Model: 7039-BSS- Combines switching and circuit protection in one device*
- Clear lever operationr unique
- "Trip Free" design cannot be held "ON" during a fault current condition
- Waterproof
- Recessed mounting holes for a clean appearance
- Large clearance around terminal studs accepts heavy gauge wire lugs
- Heavy duty 5/16 M8 terminals provide high torque connections
- Large leveler with vertical/horizontal orientation provides indication of trigger status
- Protected Ignition - Safe for installation onboard gasoline-powered boats
* Do not use as a switch where high inrush currents are expected.
Specifications| Amperage | 50 A | |
| Maximum voltage | td> | 48 VDC |
| Mounting | Panel mount | |
| Circuit breaker type | Thermal Responsive Bi-Metal Blade | |
| Terminal Stud Torque | 75 in-lb (8.47 Nm) | |
| Interrupting capacity | 5000A at 12V 3000A at 24V 1500A at 42V | |
| Minimum operating temperature | -40° C | |
| Maximum operating temperature | 85° C | |
| Case material | Thermoset polyester | |
| Circuit breaker class | Type III - switchable/manual reset - free tripping | |
| Mounting Hole | Accept #10 (M5) Screw | |
| Terminal Stud Size | 5/16" - 18 |
Heavy duty circuit protection when switching and circuit protection are required at the same time. Operation single lever is clearly visible.n against ignition (in accordance with SAE J1171). ),...
PRODUCT ID: 1001939
SKU: NVN-1001939
CSKU: CWR-1001939
REWRITE: 1013050-blue-sea-187-series-50-amp-circuit-breaker
MPN: 7039-BSS
UPC: 632085070397
ASIN:
WSKU: BSS7039
SSKU: BS-7039
KSKU: B6Z7039BSS
GSKU:
MSKU:
LSKU: 661-7039
NAME: Blue Sea 187 Series, 50A Breaker Panel Mount
NAME_EX:
PTITLE: Blue Sea 7039 - 187 Series, 50A Breaker Panel Mount
>TYPE: Electric | Circuit Breakers
SELLER: Blue Sea Systems
Blue Sea Systems 7039 Series 187 Thermal Circuit Breaker
Gtags:
br>
GSpecs:
Blue Sea 7039 - 187 Series 50 Amp Panel Mount Circuit Breaker Product Description
Circuit breakers protect wire in electrical circuits. Blue Sea Systems' wide range of magnetic and thermal circuit breakers includes a wide selection of main and branch circuit protection devices. Their rugged design makes them ideal for marine and vehicle AC and DC electrical systems. Thermal circuit breakers provide heavy-duty circuit protection for loads from 25 to 200 A when both switching and circuit protection are required.
Blue Sea 7039BSS Attributes- Rated Ampere: 50A
- Rated Voltage: 48V
- Reset Type: Manual
- Terminal Connection: Screw
- Type: Thermal
- Quantity: Single
- Estimated Installation Time (Hours): 0.25
- Combines switching and circuit protection in one device
- Waterproof. Clear single lever operation
- Ample clearance around terminal studs accepts heavy gauge wire lugs
- Heavy duty terminals provide high torque connections
- Visible yellow reset lever indicates an open state
- Meets SAE J1171 requirements for protection against external ignitions
- No-trip design cannot be held "ON" in case of fault current
- Protected against ignition - Safe for installation on board gasoline boats
- Large lever with vertical or horizontal orientation provides indication of the trigger status; Recessed mounting holes for a clean appearance
- No Supplier Warranty
Blue Sea Systems 187 Series Circuit Breaker - 50A Panel Mount
Model: 7039-BSS- Combines switching and circuit protection in one device*
- Clear single lever operation
- "Trip Free" design cannot be maintained "ON" during a fault current condition
- Waterproof
- Recessed mounting holes for a clean appearance
- Large clearance around terminal studs accepting heavy gauge wire lugs
- Heavy duty M8 5/16 terminals provide high torque connections
- Large lever with vertical/horizontal orientation provides trigger status indication
- Protected Ignition - Safe for installation on board gasoline powered boats
* Do not use as a switch where high inrush currents are expected.
| Intensity | 50A |
| Maximum voltage | 48 VDC |
| Mounting | Panel mount |
| Circuit breaker type | Thermosensitive bimetallic blade |
| Terminal stud torque | 75 in-lb (8.47 Nm) |
| Interrupting capacity | 5000 A at 12V 3000A at 24V 1500A at 42V |
| Minimum operating temperature | - 40° C |
| Maximum operating temperature | 85° C |
| Housing Material | Thermoset Polyester |
| Circuit Breaker Class | Type III - Switchable/ manual reset - no tripping |
| Mounting hole | Accept #10 (M5) screw |
| Size ofterminal stud | 5/16" - 18 |
Heavy circuit protection when switching and circuit protection are required at the same time time Single lever operation is clearly visible. Protection against ignition (according to SAE J1171),...
Frequently asked questions (FAQ) about circuit breaker panel mounting 50. A series 187 from Blue Sea. Blue Sea systems?
How to describe the panel mounting of Blue Sea series 187 50 A?
What is the type of product?
Who is Blue Sea Systems? Blue Sea Systems is committed to improving marine electrical products and systems, such as panel systems, circuit breakers, connectors and isolators. Blue Sea wants to satisfy its distributors, resellers and. , ultimately, its retail customers by designing and manufacturing electrical products designed to withstand the rigors of the marine environment.write the panel mounting of Blue Sea series 187 50 A circuit breaker? Heavy circuit protection during switching and circuit protection are required at the same time. Single lever operation is clearly visible. Protection against ignition (according to SAE J1171),...What is the type of product? Thermal
Save $43 on the purchase of Blue Sea 7039 - 50 Amp Circuit Breaker Panel Mount Series 187 for only $60 from NVN Marine! Same day dispatch before 3 p.m. Blue Sea 7039 - Technical Specifications for 50 Amp Circuit Breaker Panel Mount, Series 187
| Type: | Electrical | Circuit breakers |
|---|---|
| Supplier: | Blue Sea Systems |
| Weight: | 0.5 lbs |
| Shipping Weight: | 0.5 lbs |
|---|---|
| Box sizes: | 1.00 (h) x 1.00 (w) x 1.00 (w) |
| Cubic feet: | 1.0 |
| Returnable: | Yes |
| USPS First Class: | Yes |
| P65: | Yes |
To know the conditions of For detailed shipping details, please see our Shipping Policy and you can find our Return and Refund Policy here.
- Blue Sea 7039 187 – Series thermal circuit breaker – 50 A
- Blue Sea 7038 - 40 Amp Circuit Breaker Panel Mount 187 Series
- Blue Sea 7038 187 – Series thermal circuit breaker – 40 A
- Blue Sea 7036 187 – Series thermal circuit breaker – 30 A
- Blue Sea 7035 187 – Series thermal circuit breaker – 25 A
- Blue Sea 6337 Switch AC 120 V AC 30 A OFF + 2 Position
- Blue Sea 6011200 m-Series Dual Circuit Plus Battery Switch - Black
