Blue Sea 7605 BatteryLink charger - 10 A - 2 banks Electrical

BatteryLink Charger - 10A - 2 Bank

Charge two batteries on or away from the dock with a 10A multi-stage battery charger and charging relay Built-in 65 Amp Automatic Automatic (ACR)

AC Shore Charging: Use AC shore power to charge two isolated battery banks with the 3-Stage Battery Charger 10A steps
DC charging away from the dock: share DC power from the alternator with the starter and auxiliary battery via the built-in 65A ACR
Battery temperature compensation extends battery life
Boot insulation protects sensitive electronics from voltage drops and spikes
Includes remote LED indicator for charging status at bar
Snap-on insulating cover
Nuts Guaranteed one-piece stainless steel flanget safe and secure connections

Specifications

Total Output Current:10 A
Rated voltage: 12 V DC
Number of outputs: 1 point negative / 2 positive
Terminal stud torque: 60 in-lb (6.78 Nm)
Continuous torque:65 A
Intermittent classification: 115 A
Voltage d Universal AC Input: 90-265 V AC
AC Input Frequency: 50/60 Hz
Typical Float Voltage: 13.5V DC
Battery Types: AGM / Flooded / TPPL - Do not mix battery types batteries
Cable size to meet standards:10 AWG negative cable/6 AWG positive cable
Maximum CCA Battery Size: 850CCA
Maximum Cable Size: 1/0 AWG (50mm)
Operating current: 10 mA (no AC power, ACR opent) / 60 mA (no AC power, ACR closed)
Recommended battery bank sizes: 60 Ah minimum
Terminal Stud Size: 1/4" -20 (accepts M6 ring terminal)
Warranty: 5 years
Combine 30 sec: 13.5 V
Combine 2 min: 13.0 V
Open 10 sec: 12.35 V
Open 30 sec: 12.75 V

This product can expose you to chemicals including di(2-ethylhexyl) phthalate (dehp), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information,

It uses AC shore power to charge two isolated battery packs via a 3-stage battery charger 10 amps, while also sharing DC power from the alternator with the starting and starting power sources.
PRODUCT ID: 58590
SKU: NVN-58590
CSKU: CWR-58590
REWRITE: 69701-blue-sea-7605-batterylink-charger-10amp
MPN: 7605
UPC: 632085076054
ASIN: B01BV1MSTM
WSKU: BSS7605
SSKU: BS-7605
KSKU:
GSKU:
MSKU:
LSKU:
NAME: Blue Sea BatteryLink 7605 Charger - 10 A - 2-Bank
NAME_EX: BLUE SEA 7605 BATTERYLINK CHARGER 12 V 10 A 2 BANKS
PTITRE: Blue Sea 7605 BatteryLink Charger - 10 A - 2 banks
TYPE: Electric | Battery Chargers
SELLER: Blue Sea Systems
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> WATERCRAFT PARTS & ACCESSORIES

Battery Extension Kit Blue Sea Systems
Blue Sea 7605 BatteryLink Charger - 10 Amp - 2 Banks

Gtags:

Charging station
12 volts

GSpecs:

Blue Sea 7605 BatteryLink Charger - 10A - 2 Banks Product Description BatteryLink Charger - 10A - 2 Banks

Charge two batteries near or away from the dock with one battery multi-stage 10A charger and built-in 65A automatic charge relay (ACR)

AC shore charging: Use AC shore power to charge two groups isolated batteries with the 3-stage 10A battery charger.
Remote shore DC charging: Share DC power from the alternator with the starting battery and auxiliary battery via the Built-in 65A ACR
Battery temperature compensation extends battery life
Startup isolation protects sensitive electronics voltage drops and spikes
Includes remote LED indicator for charging status at bar level
Snap-on insulating cover
The nutsOne-piece stainless steel flange ensures safe and secure connections

Specifications

Total output current: 10 A
Rated voltage: 12 V DC
Number of outputs: 1 negative / 2 positive
Terminal stud torque: 6.78 Nm (60 in-lb)
Continuous rating: 65 A
Intermittent standard: 115 A
Voltage d Universal AC Input: 90-265 V AC
AC Input Frequency: 50/60 Hz
Typical Float Voltage: 13.5V DC
Battery Types: AGM/Flooded/TPPL – Do not mix battery types batteries
Cable size to meet standards:10 AWG negative cable / 6 AWG positive cable
Maximum CCA Battery Size: 850CCA
Maximum Cable Size: 1/0 AWG (50mm)
Operating current: 10 mA (no dAC power, ACR open) / 60 mA (no AC power, ACR closed)
Recommended battery bank sizes: 60 Ah minimum
Terminal Stud Size: 1/4"-20 (accepts M6 ring terminal)
Warranty: 5 years
Combine 30 s: 13.5 V
Combine 2 Min: 13.0 V
Open 10 sec: 12.35 V
Open 30 sec: 12.75 V

This product can expose you to chemicals including di(2-ethylhexyl) phthalate (dehp), known of California to cause cancer, birth defects or other reproductive harm. For more information, go to P65Warnings.ca.gov.

It. uses AC shore power to charge two isolated battery packs via a 3-stage 10 amp battery charger, while also sharing DC power from the alternator withstarting and starting energy sources.

Frequently asked questions (FAQ) about the BatteryLink Blue Sea 7605 charger - 10 A - 2 banks Who is Blue Sea Systems?
How proceed describe the Blue Sea 7605 BatteryLink charger - 10 A - 2 banks?
Is this product portable?
What is the output voltage?
What is the output voltage?
br/> What is the output voltage?
What is the output voltage?
What is the output voltage?
What is the output voltage?
What is the output voltage? input voltage?
How many banks support payment?
Who is Blue Sea Systems? Blue Sea Systems is committed to improving marine electrical products and systems, such as panel systems, circuit breakers, connectors and insulators. Blue Sea wants to satisfy its distributors, resellers and ultimately its retail customers bydesigning and manufacturing electrical products designed to withstand the rigors of the marine environment. How to describe the Blue Sea 7605 BatteryLink charger - 10 A - 2 banks? It uses AC shore power to charge two isolated battery packs via a 3-stage 10 amp battery charger, while also sharing DC power from the alternator with the starting and starting power sources . Is this product portable? NoWhat is the output voltage? 12vWhat is the output voltage? 10aWhat is the input voltage? 120/240vHow many banks cover the fees? 2

Save $63 when you purchase the BatteryLink Blue Sea 7605 Charger - 10 Amp - 2 Banks for only$181 from NVN Marine! Same day dispatch before 3 p.m. Blue Sea 7605 BatteryLink Charger - 10 A - 2 Bank Technical Specifications

Type:	Electric \| Chbattery sizes
Supplier:	Blue Sea Systems
Weight:	3.65 lbs
Charger output voltage:	12v
Charger Output - Amps:	10a
Charging banks:	2
Mobile:	No
Charger Input - Voltage:	120/240v
Product Manual:	Download PDF

BatteryLink Charger Blue Sea 7605 - 10A - 2 Bank User ReviewsBlue Sea 7605 BatteryLink Charger - 10Amp - 2 Bank Shipping and Returns

Shipping Weight:	3.65 lbs
Box sizes:	12.00 (h) x 12 .00 (l) x 12.00 (l)
Cubic feet:	1,728.0
Returnable:	Yes
P65:	Yes

For more shipping policy details, please see our shipping policy and you can find our return and refund policy here.