Bow thruster VETUS BOW PRO 421 42KGF - 12V Boat Outfitting

BOW PRO 421 42KGF bow thruster - 12V

BOW PRO thrusters are equipped with proven induction technology. This system makes the use of carbon brushes obsolete. As a result, the bow thruster is very quiet and has an indefinite autonomy*! The induction (AC) motor is controlled by the VETUS MCV motor controller. This in-house designed motor controller can handle 12V, 24V and AC motors, making the new bow thruster suitable for almost any boat!

The BOW PRO thruster is controlled by a Proprietary CANBUS protocol. There are two different panels available for this thruster; a fully proportional base panel and a fully proportional panel with locking function. This allows the boat to be moored without using ropes. Letting passengers board your ship has never been easier! Evolution must continue on a set of good propertiessummers, there are therefore similarities with its predecessors: the very silent propeller blades and the profiled tailpiece remain. Upgrading a BOW PRO thruster is therefore child's play because the new motor is interchangeable with the tailpiece and bridle from our range of thrusters.

Features:

Boat size range: 25ft - 30ft
Thrust force in pounds: 93 lbs
Engine power: 4
Tunnel - centerline below waterline: 125 MM
Voltage: 12V
Precision proportional control
Rated endurance time - up to 10 minutes (depending on model) at full power
Cordless motor Maintenance-free brushes
Sealed construction for intrusion protection - sealed motor for improved corrosion resistance in wet bilge environments
Built-in overheating and low voltage battery protection
Convsuitable for very demanding applications (e.g. for use in charter and charter vessels)

BOW PRO 421 42KGF-12V bow thruster The BOW PRO thruster is equipped of mature induction technology. This system eliminates the need for carbon brushes. result,...
PRODUCT ID: 80607
SKU: NVN-80607
CSKU: CWR-80607
REWRITE: 91718-vetus-bow-pro-421-bow-thruster-42kgf
MPN: BOWA0421
UPC:
ASIN:
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: VETUS BOW PRO 421 Bow Thruster 42KGF - 12V
NAME_EX: VETUS BOW PRO 421 Bow Thruster 42KGF 12V
PTITLE: VETUS BOW PRO 421 Bow Thruster 42KGF - 12V
TYPE: Boat fittings | Bow thrusters
SELLER: VETUS
SPORTING ITEMS> OUTDOOR LEISURE> BOATING AND WATER SPORTS

Gtags:

GSpecs:

VETUS BOW PRO 421 42KGF bow thruster - 12V Product description

BOW PRO 421 42KGF bow thruster

BOW PRO thrusters are equipped with advanced technology proven induction. This system makes the use of carbon brushes obsolete. As a result, the bow thruster is very quiet and has an indefinite autonomy*! The induction (AC) motor is controlled by the VETUS MCV motor controller. This in-house designed motor controller can handle 12V, 24V and AC motors, making the new bow thruster suitable for almost any boat!

The BOW PRO thruster is controlled by a Proprietary CANBUS protocol. There are two different panels available for this thruster; a fully proportional base panel and a fully proportional panel with locking function. This allows the boat to be moored without using ropes. Letting passengers board your ship has never been easiere ! The evolution must continue on a set of good properties, so there are similarities with its predecessors: all that remains are its very silent propeller blades and its profiled tailpiece. Upgrading a BOW PRO thruster is therefore child's play as the new motor is interchangeable with the tailpiece and flange of our range of thrusters.

Features:

Boat Size Range: 25 ft - 30 ft
Thrust Force in Pounds: 93 lbs
Engine Horsepower: 4
Tunnel - centerline below waterline: 125MM
Voltage: 12V
Precision proportional control
Rated battery life d Endurance - up to 10 minutes (depending on model) at full power
Maintenance-free brushless motor
Sealed intrusion protection construction - sealed motor for added strength to corrosion in wet hold environments
SurchIntegrated heater and low voltage battery protection
Suitable for very demanding applications (e.g. for use in charter and charter vessels)

BOW PRO 421 42KGF-12V bow thruster The BOW PRO thruster is equipped with maturey induction technology. This system eliminates the need for carbon brushes. result,...

VETUS BOW PRO 421 42KGF bow thruster - 12V Related productsVETUS G.R.P. Fiberglass tunnel - 40" length, 125 mm diameter
VETUS C100 fuse holder
VETUS C20 fuse strip - 300 A
VETUS joystick with hold
VETUS CAN 3 Point Hub for Swing and Bow Pro Thruster
VETUS CAN Power Cable for Swing & Bow Pro Thruster
VETUS BPPPA Joystick Panel - Hold Down
VETUS 10M Bus Cable to Hub
VETUS 1M Hub to Thruster BUS Cable
VETUS 15M VCAN BUS Hub to Thruster Cable

Frequently asked questions (FAQ) about the VETUS BOW PRO 421 42KGF - 12V bow thruster Who is the VETUS?
How to describe the VETUS BOW PRO 421 42KGF - 12V bow thruster ?
Which is the VETUS philosophy of offering innovation through design, easy installation, complete system design and worldwide availability and service High service and sales. The standard is maintained by education and training of everyone involved in the production, sales, installation, service and after-sales of our products. The VETUS product range includes more than 3,700 high-quality products that are developed entirely or partially under our own management. How to describe the VETUS BOW PRO 421 42KGF - 12V bow thruster? BOW PRO 421 42KGF-12V bow thruster The BOW PRO thruster is equipped with mature induction technology. This system eliminates the need for carbon brushes. result,...

BOW PRO thrusters are equipped with proven induction technology. This system makes the use of carbon brushes obsolete. As a result, the bow thruster is very quiet and has an indefinite autonomy!
The BOW PRO 421 42KGF - 12V bow thruster is available in different sizes, so you will find the ideal solution for your boat . .
With an integrated propeller brake, this thruster is always under control and can be used at any time!

The BOW PRO 421 Bow ThLe ruster 42KGF - 12V is equipped with induction technology, making the use of carbon brushes obsolete.
This system makes the thruster very quiet and has an indefinite autonomy!
The (AC) This version is perfect for all 12V installations and can be used with a battery charger.

BOW PRO thrusters are equipped with proven induction technology . This system makes the use obsoleteization of carbon brushes. As a result, the bow thruster is very quiet and has an indefinite autonomy!
The thrusters are also designed for use in fresh water.

Save $714 when you purchase the VETUS BOW PRO 421 42KGF Bow Thruster - 12V for only $2,859 at NVN Marine! Fast, free same-day delivery before 3 p.m. VETUS BOW PRO 421 42KGF bow thruster - 12V Technical specifications

Type:	Boat equipment \| Bow thrusters
Supplier:	VETUS
Product brochure:	Download PDF

VETUS BOW PRO 421 42KGF bow thruster - 12V User ReviewsVETUS BOW PRO 421 42KGF Bow Thruster - 12V Shipping & Return

For detailed shipping policy, please see our shipping policyedition and you can find our returns and refund policy here.