Chirp Transducer Bare Wire in Airmar R599 Low/Mid Frequency Shell Marine Navigation & Instruments
3 kW
Having the right tool for the job makes the job easier and delivers better results. The right tool for covering the deep water haunts of swordfish, tuna and other species is a 2 to 3 kW, low to medium frequency transducer. The Chirp-enabled R599LM delivers the deep-water performance of low frequency up to 3,048 m (10,000'), as well as the detailed returns produced by the narrower mid-band beams.
The Chirp technology displays 5 to 10 times greater detail and resolution than conventional frequencies. The R599LM transmits over the low frequency bandwidth of 28 to 60 kHz and the mid frequency bandwidth of 80 to 130 kHz. This transducer provides up to 82 kHz of total bandwidth in a single installation.
The transducer is installed in the included tank which is cut to the boat's lean angle and secured inside of the hull. When thetransducer is placed inside the tank, it is correctly oriented for optimal performance. The R599LM is a popular choice for customers who do not want to drill a hole in their hull and for towed or multi-hull boats.
Low Intra-Hull Chirp Transducer/ Mid Frequency R599 - Bare Wire
Rely on Airmar's wideband transducers for your ultimate fishing mission. Whether you're a commercial fisherman, charter captain, or tournament fisherman, there's a new game in town! Chirp transducers provide bottom sensing down to 3,000 m (10,000') with 5 to 10 times greater detail and resolution, so precise that it is possible to distinguish individual baitfish, fish- game and underwater structures. One transducer provides up to 102 kHz of total bandwidth in a single installation, saving customers time and money.
As the ELITE model in the Chirp In-Hull product line, the R599LM chirps on the following bandwidths: LM Model - Low Frequency 28-60 kHz/Mid Frequency 80-130 kHz.
Features:
- Depth only
- Chirp technology
- L/M frequency
- 2- 3 kW
- High performance
- Epoxy
- 25 internal ceramics
- Exclusive Xducer ID technology
Specifications:
- Deadrise shell: 0° to 22°
- Acoustic window: epoxy/urethane
- All mounting hardware included, including tank
- Weight: 19.7 kg (43.4 lb)
CHIRP Mid (80-160 KHz) ), CHIRP 260/455 KHz, with temperature sensor, shroud, 30' cable and Y connector. Used for Deep-V case.
PRODUCT ID: 74774
SKU: NVN-74774
CSKU: CWR-74774
REWRITE: 85885-airmar-r599-low-med- Frequency-in-hull -chirp transducer
MPN: R599C-LM
UPC: 801769001617
ASIN:
WSKU: AIRR599CLM
SSKU:
KSKU:
GSKU: R599C-LM
MSKU:
LSKU:
NAME: Airmar R599 Chirp transducer in Bare Wire Low/Mid Frequency Shell
EX_NAME: AIRMAR R599 Low/Mid Frequency In-Hull CHIRP Transducer Without
PTITLE: Airmar R599 Low/Mid Frequency Chirp In-Hull Transducer Bare Wire
TYPE : Navigation and marine instruments | Transducers
SELLER: Airmar
ELECTRONICS> MARINE ELECTRONICS> FISH FOUNDERS
Garmin Cv51mThp Mid Band TraditionalDownvUumlSidevUuml Chirp Transdu by Hodges Marine
br>
Gtags:
GSpecs:
Airmar R599 Bare Wire Low/Mid Frequency Chirp-in-Hull Transducer Product Description
3 kW
Having the right tool for the job makes the job easier and provides better results. The right tool for covering the deep water haunts of swordfish, tuna and other species is a 2 to 3 kW, low to medium frequency transducer. The Chirp-enabled R599LM delivers the deep-water performance of low frequency up to 3,048 m (10,000'), as well as the detailed returns produced by the narrower mid-band beams.
The Chirp technology displays 5 to 10 times greater detail and resolution than conventional frequencies. The R599LM transmits over the low frequency bandwidth of 28 to 60 kHz and the mid frequency bandwidth of 80 to 130 kHz. This transducer provides up to 82 kHz of total bandwidth in a single installation.
The transducer is installed in the tankr included which is cut to the boat's heel angle and attached to the inside of the hull. When the transducer is placed inside the tank, it is correctly oriented for optimal performance. The R599LM is a popular choice for customers who do not wish to drill a hole in their hull and for towed or multi-hull boats.
R599 low/mid frequency in hull Chirp Transducer - Bare Wire
Rely on Airmar's wideband transducers for your ultimate fishing mission. Whether you're a commercial fisherman, charter captain, or tournament fisherman, there's a new game in town! Chirp transducers provide bottom sensing down to 3,000 m (10,000') with 5 to 10 times greater detail and resolution, so precise that it is possible to distinguish individual baitfish, fish- game and underwater structures. One transducer provides up to 102 kHz of total bandwidthin a single installation, saving customers time and money.
As the ELITE model in the Chirp In-Hull product line, the R599LM chirps on the bands following frequencies: LM Model - Low frequency 28-60 kHz/Mid frequency 80-130 kHz.
Features:
- Depth only
li>
- Chirp technology
- L/M frequency
- 2-3 kW
- High performance
- Epoxy
- 25 internal ceramics
- Exclusive Xducer ID technology
Specifications:
- Deadrise case : 0° to 22°
- Acoustical window: epoxy/urethane
- All mounting hardware included, including tank
- Weight: 19.7 kg (43.4 lbs)
CHIRP Mid (80-160 KHz), CHIRP 260/455 KHz, with temperature sensor, shroud, 30' cable and Y-connector . Used for Deep-V hull.
Airmar R599 Low/Mid Frequency Chirp Transducere in Hull Bare Wire Related Products
Frequently Asked Questions (FAQ) about Airmar R599 Bare Wire Chirp Transducer in Low Shell/ medium frequency Who is the Airmar?
How to describe the bare wire of the Chirp transducer in the Airmar R599 low/mid frequency shell?
What is the power rating of the product?
What are the functions of the product transducer?
In which country is this product manufactured?
What is the frequency band of the product?
What are the dimensions and weight of the product? Airmar R599 Low/Mid Frequency Chirp In-Hull Transducer?
Is this product single or dual frequency?
How to mount or what is the mounting style of Airmar R599 Low Chirp In-Hull Transducer? /average bare wire frequency?
What is the common usage location of the product?
br/> What is the display connector of the product?
What is the length of the cable?
What is the connector type of the product?
What is the housing material of the product?
Does this product support CHIRP and what is the type?
What is the maximum depth of the product?
What is the power rise range of the product?
What is the low frequency level of the product?
What is the low frequency beam width of the product?
This product has an inclined element?
What is the mid-frequency beam width of the product?
What is the mid-frequency level of the product?
What is the suitable shell material for this product?
What is the maximum tilt angle of the product?
What is the maximum tilt angle of the product? product?
What are the manufacturer's ratings for the Airmar R599 Bare Wire Low/Mid Frequency In-Hull Chirp Transducer?
Who is the Airmar? The right transducer improves the performance of any echo sounder, whatever the levelpower or price. From small jet ski sensors to large steel tank transducers, Airmar depth, speed and temperature sensors are the most responsive on the market. Airmar prides itself on the little extras added to products that make a big difference in performance and customer satisfaction. How to describe the bare wire of the Chirp transducer in the Airmar R599 low/mid frequency hull?
3 kW
Having the right tool for the job makes the job easier and delivers better results. The right tool for covering the deep water haunts of swordfish, tuna and other species is a 2 to 3 kW, low to medium frequency transducer. The Chirp-enabled R599LM delivers the deep-water performance of low frequency up to 3,048 m (10,000'), as well as the detailed returns produced by the narrower mid-band beams.
The Chirp technology displays 5 to 10.details and resolution times greater than those of conventional frequencies. The R599LM transmits over the low frequency bandwidth of 28 to 60 kHz and the mid frequency bandwidth of 80 to 130 kHz. This transducer provides up to 82 kHz of total bandwidth in a single installation.
The transducer is installed in the included tank which is cut to the boat's lean angle and secured inside of the hull. When the transducer is placed inside the tank, it is correctly oriented for optimal performance. The R599LM is a popular choice for customers who do not want to drill a hole in their hull and for towed or multi-hull boats.
What is the power rating of the product? 2-3 kW What is the product transducer functions? DepthIn which country is this product made? USAWhat is the frequency band of the product? Low-MediumWhat are the dimensions and weights of the Airmar R599 Low/Mid Frequency Chirp in Shell Transducer packaging? 14 (l) X 17 (h) X 27 (w) inches and the weight is: 56.5 lbs. Is this product single or dual frequency? CHIRP Compatible Dual BandHow to mount or what is the mounting style of the Chirp transducer in the Airmar R599 low/mid frequency bare wire case? In the shellWhat is the common place of use of the product? Fishing, commercial fishingWhat is the product display connector? 0What is the length of the cable? 15 m (49')What is the connector type of the product? Bare wireWhat is the material of the product casing? Urethane Does this product support CHIRP and what type? Low/MediumWhat is the maximum depth of the product? Low frequency - 3048 m (10,000'), Medium frequency - 914 m (3000') What is the ramp-up range of the product? 0° to 22°What is the low frequency quality level of the product? 28-60 kHzHow wide isur of the product's low frequency beam? 23°-9°Does this product have an inclined element? NoWhat is the mid-frequency beamwidth of the product? 13°-8°What is the average frequency level of the product? 80-130 kHzWhich shell material is suitable for this product? Solid fiberglass onlyWhat is the maximum tilt angle of the product? 22°What is the maximum height of the product? Up to 22° (short side), up to 12° (long side)What are the manufacturer's notes for the Chirp transducer bare wire in the Airmar R599 low/mid frequency shell?3 kW
Having the right tool for the job makes the job easier and delivers better results. The right tool for covering the deep water haunts of swordfish, tuna and other species is a 2 to 3 kW, low to medium frequency transducer. The Chirp-enabled R599LM delivers deep water performance from low frequency to 3,048 m (10,000'), as well asi than the detailed returns produced by the narrower mid-band beams.
Chirp technology displays 5 to 10 times greater detail and resolution than conventional frequencies. The R599LM transmits over the low frequency bandwidth of 28 to 60 kHz and the mid frequency bandwidth of 80 to 130 kHz. This transducer provides up to 82 kHz of total bandwidth in a single installation.
The transducer is installed in the included tank which is cut to the boat's lean angle and secured inside of the hull. When the transducer is placed inside the tank, it is correctly oriented for optimal performance. The R599LM is a popular choice for customers who do not want to drill a hole in their hull and for towed or multi-hull boats.
Save $1,615 at procurement. the Airmar R599 low/mid frequency bare wire chirp-in-shell transducer for seu$4,669 from NVN Marine! Fast, free same-day delivery before 3 p.m. Airmar R599 Low/Mid Frequency Bare Wire Chirp In-Hull Transducer Technical Specifications
| Type: | Marine Navigation & Instruments | Transducers |
|---|---|
| Supplier: | Airmar |
| Weight: | 58.0 lbs |
| Chirp: | Low/Medium |
| User Guide: | Download PDF |
| Product manual: | Download PDF |
| Product brochure: | Download PDF |
| Product installation: | Download PDF |
| Shipping Weight: | 58.0 lbs |
|---|---|
| Box sizes: | 0.00 (h) x 0.00 (w) x 0.00 (w) |
| Cubic feet: | 0.0 |
| Returnable: | Yes |
- Airmar R509C-LM CHIRP 3KW Transducer
- Airmar R509C-LM - R509 Chirp low-medium 3 kW with FB without connector DT
- CHIRP Airmar R509C-LHW Transducer - Without Connector
- Airmar R509C-LH CHIRP transducer
- Airmar R409C-LWM Wide Beam Chrip Transducer - Low/Wide/Medium - Bare Wire
- Airmar R111C-LM 2KW Chirp Transducer - In Hull
- Airmar R111-LH In-Hull Chirp Transducer - Bare Wire
