Complete Clipper cordless wind system with display Marine Navigation & Instruments

Wireless masthead and data box

The masthead transmitter is completely wireless and is supplied with a base unit, which is powered by the 12 power supply V from the ship, the base unit receives wind speed and direction data. from the masthead transmitter and sends it to any compatible NMEA display unit.

Wireless wind speed and direction data towards any compatible NMEA display The masthead transmitter requires only occasional daylight falling on the solar panel to recharge its internal battery. It will run for 2,000 hours without further solar charging from its fully charged battery.
Easy installation with the mast in place, no wires to fall out
Simple masthead alignment via base unit
Light weight - 190 grams

Specifications:

Sleep duration> 15 000 hours *
Operating time> 2,000 hours *
Charging time <150 hours of daylight

* Fully charged with no additional daylight

NMEA 0183 4800 Baud
0/P Level 0 to 12 volts
from 220 ohm source resistor.
NMEA data phrase MWV
Supply voltage 6 to 16 volts. (Nominal 12 volts)
Supply current 17 mA
Fuse 1 A.

Display
Wind speed and direction data on any NMEA device compatible
The Clipper Wind repeater display is presented in the standard 11mm square housing. It has an exceptionally large and clear display with 60 segments for full 360 degree direction indication.

Display Unit Specifications

Nomina supply voltage l12V DC
Input phrase NMEA 0183 MWV
9 levels of display backlight
Display case sizege 110 x 11 O mm
Depth behind panel 30 mm
Consumption, 1OmA+ (1OmA for screen lighting max)

This product cannot be returned to the point of origin of purchase. Please contact the manufacturer directly with any problems or concerns.

The wireless m ast and data box mast transmitter is completely wireless and is equipped with a base unit powered by the ship's 12 V power supply. The base unit receives wind speed and direction data from the mast transmitter and sends it to any compatible NMEA display unit. The masthead transmitter sends wind speed and direction data wirelessly to any compatible NMEA display, and only needs occasional sunlight to illuminate the solar panel to power its internal battery. It will run for 2,000 hours and a fully charged battery will not charge solar power. Alignmentt simple from header through base Light weight: 190g Specifications: Standby time 15,000 hours Working time 2,000 hours Charging time 150 hours daylight Fully charged, no need daylight nmea 0183 4800 baud 0 / Level P 0 to 12 volts from a 220 ohm resistor source. The Nmea mwv data statement has a supply voltage of 6 to 16 volts. Rated supply current of 12 volts, 17mA fuse, 1 amp. Display wind speed and wind direction data to any compatible NMEA device, and the quick-cut wind indicator is displayed in the standard 11mm square housing. It has a large and clear screen with 60 segments, which can fully display 360 degree directions. Display unit specification rated power supply voltage l12v dc nmea 0183 mwv input sentence 9-level display backlight display case size 110 x 11omm depth of 30mm power consumptionBehind the panel, 1oma 1oma is used for maximum display lighting.
PRODUCT ID: 53280
SKU: NVN-53280
CSKU: CWR-53280
REWRITE: 64391-clipper-wireless-wind-system-complete-w-display
MPN: CL- WWS
UPC: 799439091818
ASIN: B00ODQYVSE
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: Clipper Wireless Complete wind system with display
NAME_EX: CLIPPER WIRELESS WIND SYSTEM WITH MHU AND DATA BOX
PTITLE: Clipper Complete wireless wind system with display
TYPE: Navigation and marine instruments | Instruments
SELLER: Clipper
ELECTRONICS> MARINE ELECTRONICS
Sports
Clipper Wireless Wind System Complete with Display (53280)
Wireless Fan Wire Clipper Complete System with CL-WWS Display
Sports
Gtags:

GSpecs:

Complete Clipper Wireless Wind System with Display Product Description Masthead and Wireless Data Box

The masthead transmitter is completely wireless and is supplied with a base unit, which is powered by the ship's 12V supply. , the base unit receives wind speed and direction data from the masthead transmitter and sends it to any compatible NMEA display unit.

Wireless wind speed and direction data to any compatible NMEA display. The masthead transmitter only requires occasional daylight falling on the solar panel to recharge its internal battery. It will run for 2,000 hours without further solar charging from its fully charged battery.
Easy installation with the mast in place, no wires to fall out
Simple masthead alignment via base unit
Light weight - 190 grams

Specifications:

Standby time> 15,000 hours *
Operating time> 2,000 hours *
Charging time etLT; 150 hours of daylight

* Fully charged with no other daylight

NMEA 0183 4800 Baud
0/P Level 0 to 12 volts
at from 220 ohm source resistance.
NMEA MWV data phrase
Supply voltage 6 to 16 volts. (Nominal 12 volts)
Supply current 17 mA
Fuse 1 A.

Display
Wind speed and direction data on any NMEA device compatible
The Clipper Wind repeater display is presented in the standard 11mm square housing. It has an exceptionally large and clear display with 60 segments for full 360 degree direction indication.

Display Unit Specifications

Nomina supply voltage l12V DC
Input phrase NMEA 0183 MWV
9 levelscreen backlight waters
Display case size 110 x 11 O mm
Depth behind panel 30 mm
Consumption, 1OmA+ (1OmA for screen lighting max)

This product cannot be returned to the point of origin of purchase. Please contact the manufacturer directly with any issues or concerns.

The wireless mast transmitter and data box are completely wireless and are equipped with a base unit powered by the 12 V power supply to the ship. The base unit receives wind speed and direction data from the mast transmitter and sends it to any compatible NMEA display unit. The masthead transmitter sends wind speed and direction data wirelessly to any compatible NMEA display, and only needs occasional sunlight to illuminate the solar panel to power its internal battery. It will run for 2,000 hours anda fully charged battery will not charge solar energy. Simple alignment of header through base Light weight: 190g Specifications: Standby time 15,000 hours Working time 2,000 hours Charging time 150 hours daylight Fully charged, no need nmea daylight 0183 4800 baud 0 / Level P 0 to 12 volts from a 220 ohm resistor source. The Nmea MWV data statement has a supply voltage of 6 to 16 volts. Rated supply current of 12 volts, 17mA fuse, 1 amp. View wind speed and direction data on any compatible NMEA device, and the fast-cut wind indicator is displayed in the standard 11mm square housing. It has a large and clear screen with 60 segments, which can fully display 360 degree directions. Display unit specification rated power supply voltage l12v dc nmea 0183 input sentence mwv display backlight to 9levels display case size 110 x 11omm depth of 30mm consumption behind the panel, 1oma 1oma is used for maximum display lighting.

Frequently asked questions (FAQ) about the Clipper wireless wind system complete with display Who is the Clipper?
How to describe the Clipper wireless wind system complete with display?
What is it? the shape of the product?
What is the function of the product instrument?
Who is the Clipper? NASA Marine Instruments has become known worldwide for manufacturing rugged, reliable products that have superb value for money. All products meet strict European standards for electromagnetic compatibility and are guaranteed for 12 months. Clipper, Target and Cruiser are three lines representing NASA Marine Instruments. How to describe the Clipper wireless wind system complete with display? The wireless transmitter from the mast and data boxis completely wireless and is equipped with a base unit powered by the ship's 12V supply. The base unit receives wind speed and direction data from the mast transmitter and sends it to any compatible NMEA display unit. The masthead transmitter sends wind speed and direction data wirelessly to any compatible NMEA display, and only needs occasional sunlight to illuminate the solar panel to power its internal battery. It will run for 2,000 hours and a fully charged battery will not charge solar power. Simple alignment of header through base Light weight: 190g Specifications: Standby time 15,000 hours Working time 2,000 hours Charging time 150 hours daylight Fully charged, no daylight needed nmea 0183 4800 baud 0 / P level 0 to 12 volts from a 220 ohm resistor source. The Nmea mwv data declaration hassupply voltage from 6 to 16 volts. Rated supply current of 12 volts, 17mA fuse, 1 amp. View wind speed and direction data on any compatible NMEA device, and the fast-cut wind indicator is displayed in the standard 11mm square housing. It has a large and clear screen with 60 segments, which can fully display 360 degree directions. Display unit specification rated power supply voltage l12v dc nmea 0183 input sentence mwv 9-level display backlight display case size 110 x 11omm depth of 30mm consumption behind the panel, 1oma 1oma is used for a maximum display illumination. What is the shape of the product? SquareWhat is the function of the product instrument? Wind

Save $94 when you purchase the Clipper Complete Wireless Wind System with Display for only $474 from NVN Marine! Same day shippingt 3 p.m. Complete Clipper Wireless Wind System with Display Technical Specifications

Type:	Navigation and Marine Instruments \| Instruments
Supplier:	Clipper
Weight:	3.85 lbs
Shape:	Square
Instrument function:	Wind
Product Manual:	Download PDF

Complete Clipper Wireless Wind Turbine System with Display User Reviews Wind Turbine System Wireless Complete Clipper with Display Shipping & Returns

Shipping Weight:	3.85 lbs
Box sizes:	6.00 (h) x 11.00 (w) x 21.00 (w)
Cubic feet:	1386.0

For conditions detailed shipping instructions, please seeour shipping policy and you can find our return and refund policy here.