Egis TDR series dual output time relay 12 V (2 x 80 A) Electrical

TDR Series 12V Dual Output Time Delay Relay (2 x 80 A)

This dual 12V time delay relay can prevent dead batteries due to equipment loads additional after stopping the engine. or from multiple systems connected to a battery with independent sustaining power consumption, maximizing operational readiness.

Applications:

Supports on-board video systems when vehicles are not in use, allowing extended downloading while shutting down less urgent equipment. sooner.
Protects sensitive electronics on board via optional under/over voltage shutdown and startup event isolation.

Features :

Eliminates vehicle downtime due to discharged batteries; Lowest off-state current consumption (1.3 mA) is available
Installasimple and robust tion - Sealed plug with optional long wires; A single device replaces multiple control units and high current replays reduce installation time, costs and potential points of failure
Additional low amperage output can be used to maintain circuitry 24-hour memory or to command other equipment to shut down
Bullet-proof construction - Sealed unit and high-temperature materials allow mounting anywhere on the vehicle ; Built-in thermal overload protection.
Meets strict OEM standards for electrical transient self-protection
Adjustable shutdown delay: 0 seconds to 4 hours
Stop switch control input option to ensure loads are not inadvertently switched on, vehicle servicing/maintenance and emergency shutdown
Flex control optionsible via ignition key, alternator voltage sensing, or both
Industry-leading 4 years Warranty

Specifications :

Maximum Current: Continuous: 80 amps DC per output (160 amps total); Intermittent: 120 A DC (5 minutes) per output
Off-state current consumption: 1.5 mA (less than 1 amp-hour of battery dissipation per month of standby)
Operation Specifications: Voltage:12 VDC nominal (8 - 18 VDC); Temperature: -40 to 85 degrees C
Time delay options: 5 sec to 4 hours via DIP switches
Environmental protection standards: IP66 waterproof. IP6K9K; Protected ignition according to ISO 8846
Optional features: Input stud voltage detection trigger for OFF relay; Load protection against undervoltage and overvoltage

Focal Features:

CommutateUpper side DIP switches

Accessible after installation, to program the timer and determine the active functionalities. Protected by a self-retaining cover.

Self-locking stainless steel hardware

100% non-ferrous, corrosion-resistant materials. All mounting screws and nuts are self-locking.

Integrated I/O connector

Quick and 100% correct assembly via Molex MX-150 connector eliminates field connection problems.

Standard and optional harnesses

Mating plugs 2 feet off the ground and ignite ionic wire included. Optional harnesses with additional outputs and alternative wire lengths are available.

Easy integration with CT fuse blocks

EasyLink busbars optional reduce the space and cost of connecting TDRs. with the fuse blocks of the seriesie CT.

Easy integration with RT fuse blocks

Optional EasyLink busbars reduce the space and cost of connecting TDRs with RT Series Fuse Blocks.

LED Diagnostics

Indicates a pending relay shutdown event due to under/over voltage or an external shutdown trigger. Output on/off status is also provided.

PRODUCT ID: 103459
SKU: NVN-103459
CSKU: CWR-103459
REWRITE : 114570-egis -tdr-series-dual-output-time-delay
MPN: 7616
UPC:
ASIN:
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: EGIS TDR SERIES DUAL OUTPUT TIME RELAY 12 V (2 TDR 12 V (2 x 80 A)
TYPE: Electric | Accessories
SELLER: Egis Mobile Electric
VEHICLES AND PARTS> VEHICLE PARTS AND ACCESSORIES> PARTS AND ACCESSORIESESSORIES FOR WATERCRAFT

Gtags:

GSpecs:

Egis TDR Series Dual Output Time Relay 12 V (2 x 80 A) Product Description

TDR Series Dual Output Time Relay 12 V (2 x 80 A)

This 12V dual output timer relay The timer relay can prevent dead batteries due to additional equipment loads after engine shutdown or multiple systems connected to a battery with independent sustaining power consumption , thereby maximizing operational availability.

Applications:

Supports on-board video systems when vehicles are not in use, enabling prolonged download while shutting down less urgent equipment. sooner.
Protects sensitive electronics on board via optional under/over voltage shutdown and startup event isolation.

Features :

Eliminates vehicle downtime due tos discharged batteries; lowest out-of-state current consumption (1.3 mA) is available
Simple and robust installation - Sealed plug with optional long leads; A single device replaces multiple control units and high amplifier replays reduce installation time, costs and potential points of failure.
Additional low amperage output can be used to maintain circuitry 24-hour memory or to command other equipment to shut down
Bullet - heavy-duty construction - sealed unit and high-temperature materials allow mounting anywhere on the vehicle; Built-in thermal overload protection.
Meets strict OEM standards for electrical transient self-protection
Adjustable shutdown delay: 0 seconds to 4 hours
Stop switch control input option to ensure loads are not alinadvertently illuminated lights, vehicle maintenance/maintenance and emergency stop
Flexible control options via ignition key, alternator voltage detection or both
4 Years Industry Leading Warranty

Specifications:

Maximum Current: Continuous: 80 amps DC per output (160 amps total); Intermittent: 120 A DC (5 minutes) per output
Off-state current consumption: 1.5 mA (less than 1 amp-hour of battery dissipation per month of standby)
Operating Specifications: Voltage: 12 Vdc Nominal (8 - 18 Vdc); Temperature: -40 to 85 degrees C
Time delay options: 5 sec to 4 hours via DIP switches
Environmental protection standards: IP66 waterproof. IP6K9K; Protected ignition according to ISO 8846
Optional features: Input stud voltage detection trigger for OFF relay; Charging protection againstundervoltages and overvoltages

Focal Features:

Top side DIP switches

Accessible after installation, to program the timer and determine the active functionalities. Protected by a self-retaining cover.

Self-locking stainless steel hardware

100% non-ferrous, corrosion-resistant materials. All mounting screws and nuts are self-locking.

Integrated I/O connector

Quick and 100% correct assembly via Molex MX-150 connector eliminates field connection problems.

Standard and optionalHarnesses

Mating plugs with 2 ground feet and ignition wire included. Optional harnesses with additional outputs and alternative wire lengths are available.

Easy integration with CT fuse blocks

Barss optional EasyLink bus reduces the space and cost of connecting TDRs. with CT series fuse blocks.

Easy integration with RT fuse blocks

Optional EasyLink busbars reduce space and the cost of connecting TDRs with RT series fuse blocks.

Diagnostics LED

Indicates a pending relay shutdown event in due to under/over voltage or external shutdown trigger. Output on/off status is also provided.

Save $46 by purchasing the Dual Time Delay serial output Egis TDR Relay 12V (2 x 80A)for only $118 from NVN Marine! Same day dispatch before 3 p.m. Egis TDR Series Dual Output Time Relay 12V (2 x 80A) Technical Specifications

Type:	Electric \| Accessories
Supplier:	Egis Mobile Electric

Egis TDR series dual output time relays 12 V (2 x 80 A) User reviewsEgis TDR series dual output time relays 12 V (2 x 80 A) Shipping & Return

For detailed shipping policy, please see our Shipping Policy and You can find our Return & Refund Policy here.