Fireboy-Xintex optical smoke detector with base Automotive/RV

Optical smoke detector with base

Optical smoke detectors have always been recognized as detectors suitable for general use. They are considered particularly suitable for smoldering fires and emergency exits. This smoke detector is also designed to significantly reduce the incidence of false alarms due to hypersensitivity to transient phenomena.

Features:

Recommended for use as general purpose smoke detectors for early warning of fires in most areas
Works well in black and white smoke
Compensation for slow changes in sensitivity
Additional confirmation of the presence of smoke before an alarm signal is issued

Specifications:

Sampling frequency: Once every four seconds
Operating voltage: 8.5 V DC to 33V DC
Power Wiring: Two-wire, polarity sensitive power supply
Power-on time: <20 seconds
Voltage minimum "Active detector": 6 V
Minimum Holding current: 8 mA
Minimum voltage to turn on the alarm LED: 5 V
Delay time alarm reset: one second
Alarm indicator: Built-in indicator with 360º visibility
Operating and storage temperature: -40ºC to +70ºC
Humidity (without condensation or icing): 0% to 98% relative humidity

Operation:

Optical smoke detectors operate on the well-established principle of light diffusion
The remarkable optical design of this smoke detector allows it to respond to a wide spectrum of fires
The detection chamber contains an optical sensor which measures backscattered light as well as diffuse lighted forward, more usual
The detector is calibrated so that it is very reliable in detecting fires but is much less likely to generate false alarms
The detector stability - high reliability and low false alarm rate is further increased by the use of algorithms to decide when the detector should go into the alarm state
Eliminates the probability that a detector triggers an alarm due to smoke from smoking materials or other source other than fire

PRODUCT ID: 98649
SKU: NVN -98649
CSKU: CWR-98649
REWRITE: 109760-fireboy-xintex-optical-smoke-detector-w-base
MPN: OMSD-01-DB-R
UPC:
ASIN:
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: FIREBOY-XINTEX SMOKE DETECTOR WITH BASE
NAME_EX :
PTITLE: Fireboy-Xintex Optical Smoke Detector with Base
TYPE: Automotive/RV | Smoke detectors
SELLER: Fireboy-Xintex
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> WATERCRAFT PARTS & ACCESSORIES

Gtags:

GSpecs:

Fireboy-Xintex optical smoke detector with base Product description

Optical smoke detector with base

Optical smoke detectors have always been recognized as detectors suitable for a general use. They are considered particularly suitable for smoldering fires and emergency exits. This smoke detector is also designed to significantly reduce the incidence of false alarms due to hypersensitivity to transient phenomena.

Features:

Recommended for use as general purpose smoke detectors for early warning of fires in most areas
Works well in black and white smoke
Compensation for slow changes in sensitivity
Additional confirmation of the presence of smoke before an alarm signal is issued

Specifications:

Sampling frequency: onetimes every four seconds
Operating voltage: 8.5 V DC to 33 V DC
Power wiring: Two-wire, polarity sensitive power supply
Power-on time: <20 seconds
Minimum "active detector" voltage: 6V
Minimum holding current: 8mA
Minimum voltage to turn on alarm LED: 5V
Alarm reset time: One second
Alarm indicator: Built-in indicator with 360º visibility
Operating and storage temperature: -40ºC to +70ºC
Humidity (no condensation or icing): 0% to 98% RH

Operation:

Optical smoke detectors operate on the well. established principle of light diffusion
The remarkable optical design of this smoke detector allows it to respond to a wide spectrum of fires
The detection chamber contains an optical sensorue which measures backscattered light as well as the more usual forward scattered light
The detector is calibrated so that it is very reliable in detecting fires, but is much less likely to generate false alarms
Detector stability - high reliability, low false alarm rate, further increased by the use of algorithms to decide when the detector should go into alarm state
Removes the likelihood of a detector producing an alarm due to smoke from smoldering materials or other sources other than fire

Frequently asked questions (FAQ) about the FIREBOY-XINTEX SMOKE DETECTOR WITH BASE Who is the Fireboy-Xintex?
Who is the Fireboy-Xintex? Fireboy-Xintex manufactures premium security devices to keep your browsing experience safe. Our equipment detects deadly fires and smokethem to protect your boat and your life. Fireboy is the world's leading manufacturer of engine compartment fire suppression systems.

Save $43 when you purchase the Fireboy-Xintex Optical Smoke Detector with Base for only $181 at NVN Marine! Same day dispatch before 3 p.m. Fireboy-Xintex Optical Smoke Detector with Basic Technical Specifications

Type:	Automotive/RV \| Smoke detection sensors
Supplier:	Fireboy-Xintex
Smoke Type:	Smoke

Fireboy-Xintex Optical Smoke Detector with Base Customer Reviews usersFireboy-Xintex Optical Smoke Detector with Basic Shipping and Return

For detailed shipping policy, please see our shipping policy and you can find our return and refund policyscholarship here.