Furuno M260 in-shell transducer 1 kW without connector Marine Navigation & Instruments
For over 70 years, Furuno has continually imagined and created new solutions, manufacturing new marine electronic equipment with the aim of offering both performance and simplicity for everyone. Not only for men and women who make a living from the sea, but also for those who simply want to enjoy the nautical life. For them, Furuno has become synonymous with quality, performance and reliability.
Furuno 527IDIHN Attributes- Mounting Location: Hull Mount
- Number of Pins: Bare Wire
- Depth: 2,500 feet
- Rated power: 1,000 watts
- Frequency range: 50/200 kHz
- Angle supported Load: 19/6 Degree Beam Width
- Cable Length: 32.8 Feet
- Plastic Transducer with Kit hull mounting
- M260 transducer with hull kit
- 1000 watts of power
- Face angles19/6 degree coul
- 3 year limited warranty
M260 1kW hull-integrated transducer without connector
In-shell features, through-shell performance.
Setting the standard in-shell
It's true! Excellent performance can be obtained from a transducer mounted in the hull. The M260, Airmar's 1 kW hull, is designed with Airmar's exclusive Broadband Ceramic technology. The 200kHz element provides wideband performance, resulting in higher resolution without sacrificing sensitivity. Combined with a seven-element 50 kHz array, this in-shell sensor delivers excellent performance.
Total fish finding performance!
Optimal performance of the depth sounder no longer require drilling a hole in the hull! The M260 is capable of transmitting and receiving via strong fiberglass while displaying sharp imagesand detailed. Follow the bottom at speeds over 30 knots! Installation simply requires gluing the tank to the interior of the vessel, leaving a clean, smooth hull exterior!
Features
- M260 Transducer with integrated shell Kit
- 1000 watts power
- 50/200 kHz with diplexer
- 19 beam angles /6 degrees
- Interfaces with any 600W or 1kW echo sounder
- Recommended for solid fiberglass hulls
- Innovative tank design allows for fore-aft or port-starboard mounting
- Available with a diplexer for single transmission line sounders and without a diplexer for dual sounders transmission line
- Mineral oil or non-toxic antifreeze (propylene glycol) is used to fill the tank
- Transducer ID™ functionality
The 1kw sensor of the nM260 ship does not have the function of connector inside the ship and has the performance of penetrating the hull. By setting the standard in hull design, you can achieve truly exceptional vessel performance.
PRODUCT ID: 44670
SKU: NVN-44670
CSKU: CWR-44670
REWRITE: 55781-furuno -m260-in -hull-1kw-transducer-w-no-connector
MPN: 527ID-IHN
UPC: 611679310439
ASIN:
WSKU: FUR527IDIHN
SSKU:
KSKU : FUR527IDIHN
GSKU:
MSKU:
LSKU:
NAME: Furuno M260 in-shell transducer 1 kW without connector
EX_NAME: FURUNO M260 IN-SHELL TRANSDUCER 1 KW WITHOUT CONNECTOR
PTITLE: Furuno M260 in-hull transducer 1kW without connector
TYPE: Marine Navigation & Instruments | Transducers
SELLER: Furuno
ELECTRONICS> MARINE ELECTRONICS> FISH FOUNDERS
Furuno 527ID-IHD 1 kW Urethane Hull Transducer (10 -Pin) Broadband
Gtags:
GSpecs:
Furuno M260 In-Hull 1kW Transducer without connector Product description
For over 70 years, Furuno has continually imagined and created new solutions, manufacturing new marine electronic equipment with the aim of offering both performance and simplicity for all . Not only for men and women who make a living from the sea, but also for those who simply want to enjoy the nautical life. For them, Furuno has become synonymous with quality, performance and reliability.
Furuno 527IDIHN Attributes- Mounting location: In Shell Mount
- Number of pins: Bare wire
- Depth: 2,500 feet
- Rated power: 1,000 watts
- Rated power: frequency: 50/200 kHz
- Supported angle: 19/6 degree beamwidth
- Cable Length: 32.8 feet
- Plastic transducer with in-hull mounting kit
- M260 transducer with in-shell kit
- 1000 watts of power
- 19 / 6 degree beam angles
- Limited warranty 3 years
M260 1 kW connectorless in-hull transducer
In-hull functionality, thru-hull performance hull.
Setting the standard in hull
It's true! Excellent performance can be obtained from a transducer mounted in the hull. The M260, Airmar's 1 kW hull, is designed with Airmar's exclusive Broadband Ceramic technology. The 200kHz element provides wideband performance, resulting in higher resolution without sacrificing sensitivity. Combined with a seven-element 50 kHz array, this hull-integrated sensor provides excellentperformance.
Total fish finding performance!
Optimal sonar performance no longer requires drilling a hole in the hull! The M260 is capable of transmitting and receiving via strong fiberglass while displaying sharp, detailed images. Follow the ben low at speeds above 30 knots! Installation simply requires gluing the tank to the interior of the vessel, leaving a clean, smooth hull exterior!
Features
- M260 Transducer with integrated shell Kit
- 1000 watts power
- 50/200 kHz with diplexer
- 19 beam angles /6 degrees
- Interfaces with any 600W or 1kW echo sounder
- Recommended for solid fiberglass hulls
- The innovative tank design allows for installation on the bow or stern or port side. starboard mounting
- Available with a diplexeur for single transmission line sounders and without diplexer for double transmission line sounders
- Mineral oil or non-toxic antifreeze (propylene glycol) is used to fill the tank
- Transducer ID™ function
The 1 kW sensor of the M260 ship does not have the function of the connector inside the ship, and has the function performance of penetrating the hull. By setting the hull standard, you can achieve truly exceptional vessel performance.
Furuno M260 1kW In-Hull Transducer Without Connector Related ProductsAirmar Deadrise Angle Finder - ±1/2° Accuracy
Frequently Asked Questions (FAQ) About Furuno M260 Transducer in Shell 1kW without Connector Who is Furuno?
How to describe Furuno M260 Transducer in Shell 1kW without Connector?
What is the power rating of the product?
Speed function included in the productit?
Can this product read the temperature?
What is the length of the cable?
Who is the Furuno? Furuno is a world-renowned manufacturer and leader in the field of marine electronics that produces an abundance of products. With a wide selection from high-end commercial grade sonar to compact Black Box sonar, Furuno has one to suit almost any vessel. When it comes to communications, optimal performance and complete reliability are essential. This is why Furuno radio equipment is robust and reliable. ibe Furuno M260 transducer in the 1 kW hull without connector? The M260 ship 1kw sensor does not have the function of connector inside the ship and has the performance of penetrating the hull. By setting the standard in hull design, you can achieve truly exceptional vessel performance. What is the power rating of the product? 1000 watt speed functionalitytsincluded in the product? No, this product can read temperature? NoHow long is the cable? 32.8 feet
Save $41 when you purchase the Furuno M260 In-Hull 1 kW Transducer without Connector for only 958 $ from NVN Marine! Same day dispatch before 3 p.m. Furuno M260 1kW in-hull transducer without connector Technical Specifications
| Type: | Marine Navigation & Instruments | Transducers |
|---|---|
| Supplier: | Furuno |
| Weight: | 110.4 lbs |
| Temperature: | No |
| Speed included: | No |
| Guide of the 'user: | Download PDF |
| Product manual: | Download PDF |
| Product Brochure: | Download PDF |
| InstaProduct llation: | Download PDF |
| Shipping weight: | 11.4 lbs |
|---|---|
| Box sizes: | 5.00 (h) x 5.00 (w) x 16.00 (w) |
| Cubic feet: | 400.0 |
| Returnable: | Yes |
| P65: | Yes |
For detailed shipping please see our shipping policy and you can find our return and refund policy here.
