Furuno NavPilot 300 Yanmar VC10/BLV Set Marine Navigation & Instruments

NavPilot 300 autopilot pack Yanmar VC10/BLV

Steer By Wire for Yanmar VC10/8LV

The NavPilot 300 -YAN is a complete NavPilot 300 system with all necessary components, cables and gateways to connect to a Yanmar VC10/8LV system (not included).

What's- it in the box?

FAP-3011- Control unit
GC-001 - Gesture controller
FAP3012 - Control unit processor
PG700 - Heading sensor unit
AIR-335-792 - Micro NMEA2000 terminator
AIR-335-791 - Micro NMEA2000 terminator
AIR-052-531 - NMEA2000 T -Connector, Female/Female/Male x 3
000-193-626-10 - CABLE ASSY YANMAR VC10
DOC- 300-YAN - NavPilot 300-YAN Document

The NavPilot 300 is not an ordinary autopilot

The NavPilot 300 is an revolutionary autopilot. With Fantum Feedback, NavPilot outboard installationsno longer require the use of a physical rudder feedback unit. This results in a streamlined and streamlined tape installation. Combined with Furuno's unique adaptive learning technology, NavPilot 300 delivers unrivaled outboard autopilot performance. Fantum Feedback is designed for planing and semi-displacement outboard vessels from 24 to 50 feet, equipped with one to four outboard motors, where it provides precise heading control, from slow trolling to high speeds. well above 60 knots.

Gesture control: just push, aim and shoot!

The gesture controller is a revolutionary and unique way to steer your boat remotely. Using Bluetooth signals it is possible to control the autopilot from anywhere on the boat within a 10 meter radius. Simply press, hold the button, point to the desired heading and release to let the piautomatic lote redirect the boat!

(Note: A Furuno PG700, SC33 or other compatible NMEA2000 vessel heading source is required.)

Versatile display modes on a vibrant 4.1" color LCD display

SABIKI™ mode allows the autopilot to control everything. If you're drifting astern, so you can focus on fishing rather than on driving By maintaining a heading astern while compensating for wind and tide, SABIKI™ mode is specially designed for Sabiki fishing, jigging and bottom fishing.

Others. View modes include Furuno Highway mode, Auto and Advanced Auto modes, and Fish Hunter mode, where one of four pre-programmed maneuvers can be performed around a specified target at a user-selected distance. These include Zig-Zag, Orbit, Figure 8 or a spiral maneuver. The Fish Hunter feature can also be used for Man Overboard.(MOB).

Integrate your helm with NavPilot's FishHunter mode

FURUNO's NavPilot Series unique feature. Find a fish target with your FURUNO sonar/fishfinder or a bird target with your FURUNO radar and send it to the NavPilot. The NavPilot will activate FishHunter mode to perform square, zigzag, circle, orbit, spiral, or figure-eight maneuvers around the specified target. at a user's expected distance. This feature can also be used for Man Overboard (MOB).

Furuno Fantum Feedback

With Fantum Feedback, NAVpilot outboard/sterndrive installations do not require more use. of a physical rudder feedback unit. NAVpilot software paves the way for simplified installation, while also providing enhanced steering control.

The Yanmar VC10/BLV NavPilot 300 Autopilot Kit is suitable forYanmar VC10/8LV NavPilot 300-YAN wired navigation system. is a complete NavPilot 300 system with all necessary components, cables and gateways to connect... -navpilot-300-yanmar-vc10-blv-package
MPN: NAVPILOT 300-YAN
UPC:
ASIN:
WSKU: FURNAVPILOT300YAN
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: Furuno NavPilot 300 Yanmar VC10/BLV Package
NAME_EX : FURUNO NAVPILOT 300 YANMAR VC10/BLV PACKAGE
PTITLE: Furuno NavPilot 300 Yanmar VC10/BLV PACKAGE
TYPE: Navigation and maritime instruments | Autopilots
SELLER: Furuno
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> WATERCRAFT PARTS & ACCESSORIES> WATERCRAFT STEERING PARTS> WATERCRAFT STEERING CABLES

Furuno NavNet TZtouch3 16-inch MFD with 1kW Dual Channel Chirp Sonar and

Gtags:

GSpecs:

Furuno NavPilot 300 Yanmar VC10/BLV Package Product Description

Yanmar VC10/BLV NavPilot 300 Autopilot Package

Steering by Wire for Yanmar VC10/8LV

The NavPilot 300-YAN is a complete NavPilot 300 system with all necessary components, cables and gateways to connect to a Yanmar VC10/8LV system (not included).

What's in the box?

FAP-3011 - Control Unit
GC-001 - Controller gesture
FAP3012 - Processor Unit
PG700 - Heading Sensor Unit
AIR-335-792 - NMEA2000 Micro Terminator
AIR -335-791 - NMEA2000 Micro Terminator
AIR-052-531 - NMEA2000 T-Connector, Female/Female/Male x 3
000-193-626-10 - CABLE ASSY YANMAR VC10
DOC-300- YAN - NavPilot 300-YAN Document

NavPilot 300 is not your ordinary autopilot

The NavPilot 300 is an autopilotrevolutionary. With Fantum Feedback, NavPilot outboard installations no longer require the use of a physical rudder feedback unit. The result is a streamlined and simplified installation. Combined with Furuno's unique adaptive learning technology, NavPilot 300 delivers unrivaled outboard autopilot performance. Fantum Feedback is designed for planing and semi-displacement outboard vessels from 24 to 50 feet, equipped with one to four outboard motors, where it provides precise heading control, from slow trolling to high speeds. well above 60 knots.

Gesture control: just push, aim and shoot!

The gesture controller is a revolutionary and unique way to steer your boat remotely. Using Bluetooth signals it is possible to control the autopilot from anywhere on the boat within a 10 meter radius. Just press, holdhold the button down, point to the desired heading and release to let the autopilot redirect the boat!

(Note: A Furuno PG700, SC33 or other compatible NMEA2000 vessel heading source is required .)

Versatile display modes on a vibrant 4.1-inch color LCD display

SABIKI™ mode allows the autopilot to control during as you drift astern, so you can concentrate on fishing rather than steering. By maintaining a heading astern while compensating for wind and tide, SABIKI™ mode is specially designed for Sabiki fishing, jigging and bottom fishing.

Other display modes include Furuno Highway mode, Auto and Advanced Auto modes, and Fish Hunter mode. , where one of four pre-programmed maneuvers can be performed around a specified target at a user-selected distance. These include Zig-Zag, Orbit, Figure 8 or a spiral maneuver. The Fish Hunter feature can also be used for Man Overboard (MOB).

Integrate your helm with NavPilot's FishHunter mode

FishHunter mode is a feature unique to FURUNO NavPilot Series. Find a fish target with your FURUNO sonar/fishfinder or a bird target with your FURUNO radar and send it to the NavPilot. The NavPilot will activate FishHunter mode to perform square, zigzag, circle, orbit, spiral, or figure-eight maneuvers around the specified target at a user-selected distance. This feature can also be used for Man Overboard (MOB).

Furuno Fantum Feedback

The Yanmar VC10/BLV NavPilot 300 Autopilot Kit is suitable for the Yanmar VC10/8LV NavPilot 300-YAN wired navigation system. is a complete NavPilot 300 system with all the necessary components, cables and gateways to connect...

Frequently Asked Questions (FAQ) About Furuno NavPilot 300 Yanmar VC10/ BLV Package Who is the Furuno?
How to describe the Furuno NavPilot 300 Yanmar VC10/BLV package?
What is the screen size of the product?
What is the weight of the product?
What is the type of display of the product?
What is the type of direction of the product?
What are the dimensions of the product?
Who is Furuno? Furuno is a world-renowned manufacturer and leader in the field of marine electronics that produces an abundance of products. With a wide choice of high-end commercial quality sonarercial up to the compact Black Box sonar, Furuno has one that fits almost any vessel. When it comes to communications, optimal performance and complete reliability are essential. This is why Furuno radio equipment is robust and reliable. How to describe the Furuno NavPilot 300 Yanmar VC10/BLV package? Yanmar VC10/BLV NavPilot 300 Autopilot Kit is suitable for Yanmar VC10/8LV wired control navigation. NavPilot 300-YAN is a complete NavPilot 300 system with all components, cables and gateways required to connect...

NavPilot 300 system
Yanmar VC10/8LV required to use the NavPilot 300
Complete with all necessary cables and gateways

NavPilot 300 is a complete system for Yanmar VC10/8LV
The NavPilot 300 -YAN includes NavPilot 300, cables, gateways and Yanmar VC10/8LV
Connects to Yanmar VC10/8LV with NavPilot 300

NavPilot 300 system.
Yanmar VC10/8LV system (not included)
Complete NavPilot 300 system with all necessary components, cables and gateways to connect to a Yanmar VC10 system /8LV (not included)

What is the screen size of the product? 16"

NavPilot 300 System
Yanmar VC10/8LV required to use the NavPilot 300
Complete with all necessary cables and gateways
NavPilot 300 is a complete system for Yanmar VC10/8LV
NavPilot 300-YAN includes NavPilot 300, cables, gateways and Yanmar VC10/8LV
Connects to Yanmar VC10 /8LV with NavPilot 300
NavPilot 300 system.
Yanmar VC10/8LV system (not included)
Complete NavPilot 300 system with all components, cables and gateways required to connect to a Yanmar VC10/8LV system (not included)

What is the weight of the product 23 lbsWhat is the display type of the product?What is the type of product direction? Steer-By-WireWhat are the dimensions of the product? 11" H x 15" W x 21" L

Buy the best price Furuno NavPilot 300 Yanmar VC10/BLV Package for only $2,345 from NVN Marine! Fast and free same day delivery before 3 p.m. Technical specifications of the Furuno NavPilot 300 package Yanmar VC10/BLV

Type:	Navigation and marine instruments \| Autopilots
Supplier:	Furuno
Weight:	14.8 lbs
Steering type:	Steer-By- Fil
Product installation:	Download PDF

User reviews of the Furuno NavPilot 300 Yanmar VC10/BLV packageFuruno NavPilot 300 Yanmar VC10/BLV Shipping and return of the package

Shipping Weight:	14.8 lbs
Box sizes:	15.00 (h) x 15.00 (w) x 26.00 (w)
Cubic feet:	5850.0
Returnable:	Yes