Fusion Apollo 4 channel amplifier 1200 watts 12v Entertainment

Fusion Apollo™ 4-Channel Marine Amplifier (150 Watts RMS per Channel)

Model: 010-02284-45

Keep the music playing longer for a long time without draining your battery as quickly.
No more manual adjustments to your audio settings. The Easy Tune feature does it for you.
A glance at the LED indicators lets you identify if the amplifiers are shorted or overheating.
These amps have less distortion. and noise, so you can enjoy quality sound.
Mounting brackets are included for simple installation.
Don't worry about potential damage from overheating with our ignition protection design.

Apollo amplifiers are designed to produce impressive power with less drain on your battery. The monoblock produces 650 watts RMS and the 4/6/8 channel amplifiers produce 150 watts RMS per channel.

These amplifiers use the Easy Tune function, which automatically regulates audio settings. So you can get the best quality sound possible without manual adjustments.

Some amplifiers distort the sound when they add power. Ours are specially designed with minimal distortion and noise, so you can enjoy high-quality sound, even at higher volumes.

Identify electrical problems at a glance eye. These LEDs will alert you to problems with electrical currents, short circuits as well as temperature.

Easily install the amplifiers on board with the included mounting brackets.

The protected design Ignition helps prevent potential hazards. damage due to overheating.

The amplifier circuit board has been specially coated to provide additional protection against marine elements.

You can connect juup to two speakers per channel, increasing configuration options.

The amplifiers are built to last season after season. They have been tested to ensure a high level of protection against salt spray, temperature, vibration and UV.

Specifications

General
Physical dimensions without support (LxWxH)	9.25"" x 7.06"" x 1.75"" (235 x 180 x 45 mm)
Physical dimensions with stand (LxWxH)	9.25"" x 7.06"" x 2.13" " (235 x 180 x 50 mm)
Weight	4.85 lb (2.2 kg)
Waterproof class	IPX2
Amplifier class	Class - D
Nominal power CEA-2006	150 watts RMS x 4 at 14.4 V input - 4 ohms <1% THD
Total rated output power - 2 ohms (watts)	290 watts RMS x 4 at 14.4 V input - 2 ohms <1% THD
Total rated output power - 4 ohms bridged (watts)	580 watts RMS x 2 at 14.4 V input - 4 ohms Bridged <1% THD
Peak power (watts)	1,200 watts
Input sensitivity	1.6 V RMS
Input impedance	22k ohm
Operating voltage	10.8 V - 16 V DC
Current consumption, standby/off with wired amplifier	<5 mA input at 14.4 V
Current draw, enabled, no audio
Fuse rating	85 A electronic fuse (no replacement required)
Model and nominal value of the fusepower cable fuse	Bussmann ™ BK/AMI-030 30 A fast acting
Ignition safety protected ( SAE J1171)	Yes
Protection circuits	Reverse voltage Under/over voltage input Over temperature Output short circuit
Operating temperature range	32° to 122° F (0° to 50° C)

Box contents:

Apollo 4 channel amplifier
mounting bracket
power connector
Two speaker connectors with high-power mode adapters
Four 8-gauge flat-head self-tapping screws
Four 8 gauge pan head self-tapping screws (for mounting bracket)
Four screw covers
Fuse holder
Mounting Template
Installation Instructions
Important Safety and Product Information (ISPI)

PRODUCT ID: 1003549
SKU: NVN-1003549
CSKU: CWR-1003549
REWRITE: 1014660-fusion-apollo-4-channel -amplifier-1200 watts
MPN: 010-02284-45
UPC: 753759329617
ASIN:
WSKU: FUS0100228445
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: Fusion Apollo 4 channel 1200 watt 12v amplifier
NAME_EX:
PTITLE: Fusion Apollo 4 channel 1200 watt 12v amplifier
TYPE: Entertainment | Stereo Systems
SELLER: FUSION
ELECTRONICS> MARINE ELECTRONICS> MARINE RADIOS

Gtags:

GSpecs:

Fusion Apollo 4-Channel Marine Amplifier 1200 Watts 12V Product Description

Fusion Apollo™ 4-Channel Marine Amplifier (150 Watts RMS per channel)

Model: 010-02284-45

Continue music for longer without draining your battery as quickly.
No more manual adjustments to your audio settings. The Easy Tune feature does it for you.
A glance at the LED indicators lets you identify if the amplifiers are shorted or overheating.
These amps have less distortion. and noise, so you can enjoy quality sound.
Mounting brackets are included for simple installation.
Don't worry about potential damage from overheating with our ignition protection design.

Apollo amplifiers are designed to produce impressive power with less drain on your battery. The monoblock produces 650 watts RMS and 4/6/8 channel amplifiers produce 150 watts RMS per channel.

These amplifiers use the Easy Tune feature, which automatically regulates audio parameters. So you can get the best sound quality without making manual adjustments.

Some amplifiers distort the sound when they add power. Ours are specially designed with minimal distortion and noise, so you can enjoy high-quality sound, even at higher volumes.

Identify electrical problems at a glance eye. These LEDs will alert you to problems with electrical currents and shorts as well as temperature.

Easily install amplifiers on board with the included mounting brackets.

The weatherproof design Ignition helps prevent potential hazards. damage due to overheating.

The amplifier circuit board has been specially coated to provide afor added protection against marine elements.

You can connect up to two speakers per channel, increasing configuration options.

The amplifiers are built to last season after season season. They have been tested to ensure a high level of protection against salt spray, temperature, vibration and UV.

Specifications

General
Physical dimensions without support (LxWxH)	9.25"" x 7.06"" x 1.75"" (235 x 180 x 45 mm)
Physical dimensions with stand (LxWxH)	9.25"" x 7.06"" x 2.13"" (235 x 180 x 50 mm)
Weight	4.85 lb (2.2 kg)
Waterproof	IPX2
Amplifier class	Class D
Rated powerCEA-2006	150 watts RMS x 4 at 14.4 V input - 4 ohms <1% THD
Total nominal power output - 2 ohms (watts)	290 watts RMS x 4 at 14.4 V input - 2 ohms <1% THD
Total rated output power - 4 ohms bridged (watts)	580 watts RMS x 2 at 14.4 V input - 4 ohms bridged <1% THD
Maximum power (watts)	1200 watts
Input sensitivity	1.6V RMS
Input Impedance	22k ohm
Operating voltage	10.8 V - 16 V DC
Current consumption , standby/off with wired amplifier	<5 mA input at 14.4 V
Current consumption, on, no audio	<1.15A input at 14.4V
Fuse blown	85 A electronic fuse (atcun replacement required)
Model and rating of power cable fuse	Bussmann™ BK/AMI-030 30 A to quick action
Protected ignition safety (SAE J1171)	Yes
Protection circuits	Reverse voltage Input under/over voltage Over temperature Output short circuit
Operating temperature range	32° to 122° F (0° to 50° C)

What's in the box:

Apollo 4 internal amplifier
mounting bracket
power connector
Two speaker connectors with high power mode adapters
Four 8 gauge flat head connectors - tapping screws
Four 8 gauge pan head self tapping screws (for bracket mounting)
Four screw covers
Fuse holder
Mounting model
Installation instructions
Important Safety and Product Information (ISPI)

Buy at the best price Fusion Apollo 4 Channel 1200 Watt 12v Amplifierfor only $649 from NVN Marine! Free same day delivery before 3 p.m. Fusion Apollo Amplifier 4 Channel 1200 Watt 12v Technical Specifications

Type:	Entertainment \| Stereo Systems
Supplier:	FUSION
Weight:	6.6 lbs

Fusion Apollo 4 CUser Reviews of the Hannel 1200 Watt Amplifier 12vFusion Apollo 4 Channel 1200 Watt Amplifier 12v Shipping & Returns

Shipping Weight:	6.6 lbs
Box sizes:	1.00 (h) x 1.00 (w) x 1.00 (w)
Cubic feet:	1.0
Returnable:	Yes
USPS First Class:	Yes
P65:	Yes

For detailed shipping terms, please see our Shipping Policy and you can find our returns and refund policy here.