Garmin Airmar R109LM Through-Through Probe - Bare Wires Marine Navigation & Instruments

Garmin makes products that are built inside to last outside. We bring GPS navigation and wearable technology to the automotive, aviation, marine, outdoor and fitness markets. We believe that every day is an opportunity to innovate and a chance to beat yesterday. We deliver products with essential utility, cutting-edge technologies, compelling features and exceptional ease of use to create clear differentiators that our customers love and desire.

Garmin 101280920 Attributes

Mounting Location: Thru-Hull Bracket
Number of Pins: Bare Wires
Depth: 6,000 Feet
Rated Power: 2,000 watts
Frequency range: 38- 75 kHz for low CHIRP and 150-210 kHz for high CHIRP operating frequency
Angle supported: 0 to 25 degrees Deadrise
Cable Length: 39 Feet

Garmin 101280920Features and Benefits

Designed for inshore fishing
The CHIRP transducer provides bottom detection up to 10,000 feet
Res. The solution is so accurate that It is possible to distinguish between individual baitfish, game fish and underwater structures.
Designed for boats 40 feet and above with fiberglass hulls, wood or metal
One year limited warranty

Garmin Warranties 101280920

garmin-marine-warranty-policy.pdf

Airmar R109LM Through-Through Transducer - Bare Wire

Rely on Airmar's wideband transducers for your ultimate fishing mission. Whether you're a commercial fisherman, charter captain, or tournament fisherman, there's a new game in town! Chirp transducers provide bottom detection down to 3,000 m (10,000') with 5 to 10 times greater detail and resolution, so precise that it is possible to distanceing individual baitfish, gamefish and underwater structures. One transducer provides up to 107 kHz of total bandwidth in a single installation, saving customers time and money.

As a HARD CORE model in the Chirp Thru-Hull products, the R109LM chirps over the following bandwidths:

LM Model - Low Frequency 38-75 kHz/Mid Frequency 80-130 kHz

Features:

Fast response water depth and temperature sensor
Low: CHIRPS 38 kHz to 75 kHz , 19° to 10° port-starboard beamwidth (10° to 5° fore-aft beamwidth)
Medium: CHIRPS 80kHz to 130kHz, 13° to 8° from beamwidth
87 kHz total bandwidth from one transducer
Covers the popular fishing frequencies of 38, 50, 88 and 107 kHz plus everything else in bandwidth
Fishing Profile: Inshore and Offshore Commercial and Recreational Fishing (Deep Water Canyon and Seamount Tracking)
Urethane transducer housing with high performance shroud
Boat size: 12 m (40') and above
Hull type: fiberglass, wood or metal
li>
Exclusive Xducer ID technology

Specifications:

Deadrise shell: 0° to 25°
Acoustic window: epoxy/urethane
Weight: 15.1 kg (33.3 lb)

Garmin Garmin Garmin is specially designed for inshore fishing and its operating frequency range is 38 to 75 kHz (low frequency) and 80 to 130 kHz. kHz (medium frequency). This CHIRP sensor can detect depths as low as 10,000 feet and has a high resolution that can distinguish between single baitfish, gamefish and underwater structures. Designed for fiberglass, wood or metal hullsal 40 feet and above.
PRODUCT ID: 72572
SKU: NVN-72572
CSKU: CWR-72572
REWRITE: 83683-garmin-airmar-r109lm- thru-hull transducer-bare hull
MPN: 010-12809-20
UPC: 753759213039
ASIN:
WSKU:
SSKU:
KSKU: GAR101280920
GSKU:
MSKU:
LSKU:
NAME: Garmin Airmar R109LM Thru-Hull Transducer - Bare Wires
NAME_EX: GARMIN AIRMAR R109LM Thru-Hull Transducer BARE WIRES
PTITLE: Garmin Airmar R109LM Thru-Hull Transducer - Bare Wires
TYPE: Navigation and maritime instruments | Transducers
SELLER: Garmin
ELECTRONICS> MARINE ELECTRONICS> FISH FINDERS

Garmin Airmar R109LM

Gtags:

GSpecs:

Garmin Airmar R109LM Through-Through Transducer - Bare Wires Product Description

Garmin manufactures products designed indoors for outdoor life. We bring GPS navigation and wearable technology to the automotive, aviation, marine, outdoor and fitness markets. We believe that every day is an opportunity to innovate and a chance to beat yesterday. We deliver products with essential utility, cutting-edge technologies, compelling features and exceptional ease of use to create clear differentiators that our customers value and desire.

Garmin 101280920 Attributes

Mounting location: Through-hole mounting
Number of pins: Bare wires
Depth: 6,000 feet
Rated power: 2000 watts
Frequency rangee: 38-75 kHz for low CHIRP and 150-210 kHz for high CHIRP operating frequency
Supported angle: From 0 to 25 degrees
Cable length: 39 feet

Garmin 101280920 Features and benefits

Designed for inshore fishing
The CHIRP transducer provides bottom detection up to 10,000 feet
The resolution is so precise that it is possible to distinguish individual baitfish, game birds and underwater structures
Designed for boats 40 feet and above with fiberglass, wood or metal hulls
One Year Limited Warranty

Garmin Warranties 101280920

garmin-marine-warranty-policy.pdf

Airmar R109LM Thru-Through Transducer - Bare Wires

Trust Airmar's wideband transducers for your ultimate fishing mission. Whether you are a fisherman comcommercial, charter captain or tournament angler, there's a new game in town! Chirp transducers provide bottom sensing down to 3,000 m (10,000') with 5 to 10 times greater detail and such fine resolution that it is possible to distinguish between fish- individual baits, game fish and underwater structures. One transducer provides up to 107 kHz of total bandwidth in a single installation, saving customers time and money.

As a HARD CORE model in the Chirp Thru-Hull products, the R109LM Chirps on the following bandwidths:

LM Model - Low frequency 38-75 kHz/Mid frequency 80-130 kHz

Features:

Fast response water depth and temperature sensor
Low: CHIRPS 38 kHz to 75 kHz , beamwidth from 19° to 10° port-starboard (front beamwidth-backward from 10° to 5°) )
Medium: CHIRPS from 80 kHz to 130 kHz, beamwidth from 13° to 8°
87 kHz total bandwidth at from one transducer
Covers the popular fishing frequencies of 38, 50, 88 and 107 kHz plus everything else in the bandwidth
Fishing Profile: Commercial and Recreational Fishing Inshore and offshore (tracking deep water canyons and seamounts)
Urethane transducer housing with high performance fairing
Boat size: 12 m (40') and above
Hull type: fiberglass, wood or metal
Exclusive Xducer ID technology
li>

Specifications :

Deadrise shell: 0° to 25°
Acoustic window: epoxy/urethane
Weight: 15.1 kg ( 33.3 lbs)

Garmin Garmin Garmin is specially designed for inshore fishing and its operating frequency range is 38-75 kHz (low frequency) and 80-130 kHz (average frequencyuence). This CHIRP sensor can detect depths as low as 10,000 feet and has a high resolution that can distinguish between single baitfish, gamefish and underwater structures. Designed for fiberglass, wood or metal hulls 40 feet and longer.

Garmin Airmar R109LM Through-Through Transducer - Bare Wires Related ProductsGarmin Bare Wire Transducer to 12 Pin Sonar Wire Block Adapter
Sika Sikaflex 291 LOT Slow Curing Adhesive and Sealant 10, 3 oz (300 ml) Cartridge - Black
Sika Sikaflex 291 LOT Slow Curing Adhesive & Sealant 10.3 oz (300 ml) Cartridge - Mahogany
Sudbury Elastomeric Marine Sealant - 10 oz Cartridge - White
Sudbury Elastomeric Marine Sealant - 10 oz Cartridge - Black
Sudbury Elastomeric Marine Sealant - 10 oz Cartridge - Clear
3 oz (89 ml) Sudbury Elastomeric Sealant Tube - White
br />Tube of Sudbury elastomeric sealant 3 oz (89 ml) - Transparent
Sudbury Elastometric Sealant Tube 3 oz (89 ml) - Black
BoatLIFE Life-Calk Sealant Tube - Non-Shrink - 2.8 FL. Oz - White

Frequently Asked Questions (FAQ) About Garmin Airmar R109LM Thru-Through Transducer - Bare Wires Who is Garmin?
How to Describe Garmin Airmar R109LM Thru-Through Transducer Transducer - Bare wires?
What is the power rating of the product?
How many pins are there in the connector of the product?
Speed function included in the product?
How or what is the mounting style of the Garmin Airmar R109LM Through-Through Transducer - Bare Wires?
Can this product read temperature?
What is the cable length (feet)?
What is the type imagination of the product?
What is the length of the cable?
Does this product support CHIRP and what is the type?
Who is Garmin? Garmin is a leader in positioning system technologyglobal technology (GPS) and an innovator in the field of consumer electronics. Garmin serves both the aviation and consumer markets. Garmin products are used in flying, boating, driving, hiking and many other activities. Specifically, Garmin aims to enrich the lives of customers, suppliers, distributors and employees by providing the best products with superior quality, safety and operational features at affordable prices. How to describe the Garmin Airmar R109LM Thru-Through Transducer – Bare Wires? Garmin Garmin Garmin is specially designed for inshore fishing and its operating frequency range is 38 to 75 kHz (low frequency) and 80 to 130 kHz. (medium frequency). The CHIRP sensor can detect depths as low as 10,000 feet and has a high resolution that pAllows you to distinguish between single baitfish, gamefish and underwater structures. Designed for fiberglass, wood or metal hulls 40 feet and longer. What is the power rating of the product? 2000 Watt

$890

Garmin Airmar R109LM Thru-Through Probe - Bare Wires

$3,089

Type:	Navigation and marine instruments \| Transducers
Vendor:	Garmin
Temperature:	Yes
Speed included:	No
Pins:	Bare wires
Mounting style:	Through the hull
Imagination:	Standard
Chirp:	Low/Medium
Cable length (feet ):	36'