Garmin GET 10 Motor Tilt NMEA 2000 Analog Adapter Marine Navigation & Instruments

With the GET 10 Analog Engine Tilt and Trim Adapter on board your vessel, you can breathe new life into your old gauges by making the transition from analog to digital. This simple-to-install adapter takes data generated by traditional analog gauges and converts the data into a NMEA 2000(R) signal so you can create or expand your network without replacing all of your boat's equipment. With the Garmin GET 10 adapter, you can convert analog information provided through your boat's engine tilt sensor (not included) to your NMEA 2000 network. The GET 10 allows you to observe tilt information from the engine on compatible Garmin display devices connected to your NMEA 2000 network. Garmin NMEA 2000 analog adapters are easy to add to any existing marine network. Once installed, adapter data can be viewedRead via the GMI™ 10 marine instrument display and other compatible Garmin devices. This easy-to-use setup will help bring your old dashboard into the digital age.

Garmin 101132500 Attributes

Interface: NMEA 2000
Rated Voltage: 9 at 16 volts
Wired: Yes

Garmin 101132500 Features and Benefits

Garmin NMEA 2000 analog adapters are easy to add to any network existing marine
Easy-to-use setup will help bring your old dashboard into the digital age
li>
GET 10 lets you observe information motor tilt on compatible Garmin displays connected to your NMEA 2000 network
Temperature range: 5 degrees Fahrenheit to 158 degrees Fahrenheit
2-year limited warranty

Garmin 101132500 Installation Instructions

GET10EngineTiltAdapter_InstallationandConfigurationInsturctions.pdf

Garmin Warranties 101132500

garmin-marine-warranty-policy .pdf

The new NMEA 2000 analog adapters are the perfect accessories to bring any headset into the digital age. Simple to install and easy to configure, the NMEA 2000 adapters take the signals generated by traditional analog gauges and sensors and convert that data to NMEA 2000 format. The data can then be broadcast via the NMEA 2000 protocol to the display of the Garmin GMI 10 multifunction instrument. Combining these adapters with a Garmin GMI 10 will turn even the most outdated dashboard into a glass digital headset.

With the help of the built-in GET 10 motor tilt/fine-tune analog adapter, you can make the transition from analog to digital, so your old gauges have a new look. It's simple...
ID PPRODUCT: 37776
SKU: NVN-37776
CSKU: CWR-37776
REWRITE: 48887-garmin-get-10-engine-tilt-nmea-2000
MPN: 010-11325-00
UPC: 753759098476
ASIN: B002YE3URA
WSKU: GAR0101132500
SSKU:
KSKU: GAR101132500
GSKU:
MSKU:
LSKU: NAME: NMEA 2000 d Analog Adapter Garmin GET 10 Engine Tilt
EX_NAME: GARMIN GET 10 Engine Tilt NMEA 2000 ANALOG ADAPTER
PTITLE: Garmin GET 10ter Engine Tilt NMEA 2000 Analog Adapter
TYPE: Marine Navigation & Instrumentation | NMEA Cables and Sensors
SELLER: Garmin
ELECTRONICS> MARINE ELECTRONICS> Marine Chartplotters and GPS

Garmin GET 10 Engine Tilt NMEA 2000 Analog Adapter (37776 )
br> Garmin GET 10 interface for Garmin GMI 10/GPSMAP 4008,4010 and more

Gtags:

Garmin

GSpecs:

Garmin GET 10 Engine Tilt Analog NMEA 2000 Adapter Product Description

With the GET 10 Engine Tilt and Trim Analog Adapter aboard your vessel, you can breathe new life into your old gauges by making the transition from analog to digital. This simple-to-install adapter takes data generated by traditional analog gauges and converts the data into a NMEA 2000(R) signal so you can create or expand your network without replacing all of your boat's equipment. With the Garmin GET 10 adapter, you can convert analog information provided through your boat's engine tilt sensor (not included) to your NMEA 2000 network. The GET 10 allows you to observe tilt information from the engine on compatible Garmin displays connected to your NMEA 2000 network. Garmin NMEA 2000 analog adapters are easy to add to anyexisting marine network. Once installed, data from the adapters can be viewed through the display of GMI™ 10 marine instruments and other compatible Garmin devices. This easy-to-use se-up will help you bring your old dashboard into the digital age.

Garmin 101132500 Attributes

Interface: NMEA 2000
Rated voltage: 9 to 16 volts
With cable: Yes

Features and benefits of the Garmin 101132500

Garmin NMEA 2000 analog adapters are easy to add to any existing marine network
Easy to use -Using the configuration will help you bring your old dashboard into the digital age
GET 10 allows you to observe the information of motor tilt on compatible Garmin displays connected to your NMEA 2000 network
Range oftemperature: 5 degrees Fahrenheit to 158 degrees Fahrenheit
2 year limited warranty

Garmin 101132500 Installation Instructions

GET10EngineTiltAdapter_InstallationandConfigurationInsturctions.pdf

Garmin Warranties 101132500

garmin-marine-warranty-policy.pdf

The new NMEA 2000 analog adapters are the perfect accessories to bring in any bar in the digital age. Simple to install and configure, NMEA 2000 adapters take signals generated by traditional analog gauges and sensors and convert that data to NMEA 2000 format. The data can then be streamed via the NMEA 2000 protocol to the instrument's display Garmin GMI 10 Multifunction. Combining these adapters with a Garmin GMI 10 will turn even the most outdated dashboard into a glass digital headset.

With the help of the analog tilt/adjust adapterprecision from the built-in GET 10 engine, you can make the transition from analog to digital, so that your old gauges have a new look. It's simple...

Garmin GET 10 Engine Tilt NMEA 2000 Analog Adapter Related ProductsGarmin NMEA 2000 Backbone/Drop Cable (1 Ft.)
Garmin NMEA 2000 Backbone Cable (2M)
Garmin NMEA 2000 backbone cable (6M)
Garmin NMEA 2000 backbone cable (10M)
Garmin NMEA 2000 T CoConnector
Garmin NMEA 2000 Terminator, male
Garmin NMEA 2000 Terminator , female
Garmin NMEA 2000 Field Installable, Male
Garmin NMEA 2000 Field Installable Connector, Female
Garmin NMEA 2000 Inline Terminator

Frequently Asked Questions Questions (FAQ) about the Garmin GET 10 Motor Tilt Analog NMEA 2000 Adapter Who is Garmin?
How to describe the Garmin GET 10 Motor Tilt NMEA 2000 Analog Adapter?
What is the interface of product control?
What is the product interface?product data?
Who is Garmin? Garmin is a leader in global positioning system (GPS) technology and an innovator in consumer electronics. Garmin serves both the aviation and consumer markets. Garmin products are used in flying, boating, driving, hiking and many other activities. Specifically, Garmin aims to enrich the lives of customers, suppliers, distributors and employees by providing the best products available. Deliver superior quality, safety and operational features at affordable prices . How to describe the Garmin GET 10 Engine Tilt NMEA 2000 Analog Adapter? With the help of the built-in GET 10 motor tilt/fine-tune analog adapter, you can make the transition from analog to digital, so your old gauges haveient a new look. It's simple... What is the product control interface? NMEA 2000 What is the Product Data Interface? NMEA 2000

Save $42 when you purchase the Garmin GET 10 Motor Tilt NMEA 2000 Analog Adapter for only $157at NVN Marine! Same day dispatch before 3 p.m. Garmin GET 10 Engine Tilt NMEA 2000 Analog Adapter Technical Specifications

Type:	Marine Navigation & Instruments \| NMEA Cables and Sensors
Vendor:	Garmin
Weight:	1.13 lb
Data interface:	NMEA 2000
Product Manual:	Download PDF

Garmin GET 10 Engine Tilt NMEA 2000 Analog Adapter User ReviewsGarmin GET 10 Engine Tilt NMEA 2000 Analog AdapterEngine Season Shipping & Returns

Shipping Weight:	1.13 lbs
Box sizes:	2.00 (h) x 6.00 (w) x 6.00 (w)
Cubic feet:	72.0
Returnable:	Yes
P65:	Yes

For more shipping policy details, please see our shipping policy and you can find our return and refund policy here.