Garmin heading sensor Marine Navigation & Instruments
When interfacing this 3-axis compass heading sensor with Garmin's marine line of MFDs and radars, mariners can expect unmatched radar overlay performance and accuracy as well as Excellent MARPA capabilities.
This heading sensor uses a gyroscope. , so it can maintain exceptional heading accuracy of 2 degrees in difficult dynamic conditions, with up to 30 degrees of pitch and roll. Additionally, it supports NMEA 0183 or NMEA 2000 data output to fit any installation.
Installation is a breeze thanks to the innovative design of the heading sensor allowing it to be mounted on any inclined partition. Mariners can expect this heading sensor to provide trouble-free service in the harshest conditions and will learn to appreciate its reliability and excellent performance.
- Superior static heading accuracy1 degree eure
- Industry-leading 2 degrees dynamic accuracy, up to 30 degrees of pitch and roll
- Three-axis solid-state compass provides data accurate heading measurements
- Three-axis accelerometer improves heading, pitch and roll in static conditions
- Three-axis gyroscope improves heading, pitch and roll under dynamic conditions
- Temperature is compensated over the entire operating range to ensure optimal accuracy
- Default heading output is 10 Hz for NMEA 0183 and NMEA 2000 ( NMEA 2000 can be transmitted up to 20 Hz)
- Easy installation on any inclined wall
- Easy installation on any inclined wall
- li>
- Automatic calibration function
- Waterproof housing (IPX6)
- Dimensions: 2" (5.08 cm) H x 4.4" (11.18 cm) ) L x 4.5" (11.43 cm) D
- Operating voltage: 9 VDC to 16 VDC
*Please note: NMEA 0183 and NMEA 2000 cables are sold separately
When connecting this three-axis compass azimuth sensor With Garmin's MFD and radar series of marine products, mariners can expect unparalleled radar coverage and accuracy as well as excellent MARPA features. This heading sensor (based on Airmar H2183) uses a rate gyroscope. can maintain an excellent 2 degrees. In severe dynamic conditions, up to 30 degrees of pitch and roll heading accuracy. Additionally, it supports NMEA 0183 or NMEA 2000 data output to fit any installation. The innovative design of the heading sensor makes it very convenient to install and can be installed on any inclined partition. Sailors can expect the heading sensor to provide trouble-free service in the worst conditions and will learn to appreciate its reliability and performances exceptional.
PRODUCT ID: 1000552
SKU: NVN-1000552
CSKU: CWR- 1000552
REWRITE: 1011663-garmin-heading-sensor
MPN: 010-11417-00
UPC: 753759099220
ASIN:
WSKU: GAR0101141700
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: Garmin heading sensor
br>NAME_EX:
PTITLE: Garmin heading sensor
TYPE: navigation and marine instruments | Gauges
SELLER: Garmin
Garmin Heading Sensor
Gtags:
| Garmin | |
| Up 'at 4.3 weeks | |
| Water resistant |
GSpecs:
Garmin Heading Sensor Product Description
When interfacing this 3-axis compass heading sensor with Garmin's marine line of MFDs and radars, mariners can expect performance and accuracy of unrivaled radar overlay as well as excellent MARPA capabilities.
This section The sensor uses a gyroscope, allowing it to maintain exceptional heading accuracy of 2 degrees in difficult dynamic conditions, with up to 'at 30 degrees of pitch and roll. Additionally, it supports NMEA 0183 or NMEA 2000 data output to fit any installation.
Installation is a breeze thanks to the innovative design of the heading sensor allowing it to be mounted on any inclined partition. Mariners can expect this heading sensor to provide trouble-free service in the harshest conditions and will learn to appreciate its reliability and excellent performance.e performance.
- Greater than 1 degree static heading accuracy
- Industry-leading 2 degrees dynamic accuracy, up to 30 degrees of pitch and roll
- Three-axis solid-state compass provides accurate heading data
- Three-axis accelerometer improves heading, pitch and roll in static conditions
- Three-axis gyroscope improves heading, pitch and roll in dynamic conditions
- Temperature compensated throughout the operating range to ensure optimal accuracy
- The output of default rate is 10 Hz for NMEA 0183 and NMEA 2000 (NMEA 2000 can be transmitted up to 20 Hz)
- Easy installation on any inclined wall
- Function 'automatic calibration
- Waterproof housing (IPX6)
- Dimensions: 2" (5.08 cm) H x 4.4 " (11.18 cm) W x 4.5" (11.43 cm) D
- Operating voltage: 9 VDC to 16 VDC
*Please note: NMEA 0183 and NMEA 2000 cables sold separately
When connecting this three-axis compass azimuth sensor with Garmin's MFD and radar series of marine products, mariners can expect unrivaled radar coverage and accuracy as well as excellent functions MARPA (based on this heading sensor on Airmar H2183) uses a gyroscope rate, so it can maintain an excellent 2 degrees. In severe dynamic conditions, up to 30 degrees of pitch and roll heading accuracy. Additionally, it supports NMEA 0183 or NMEA 2000 data output to fit any installation. The innovative design of the heading sensor makes it very convenient to install and can be installed on any inclined partition. Sailors can expect the heading sensor to provide trouble-free service in the worst conditions and will learn to appreciate its exceptional reliability and performances.
Save $205 when you purchase the Garmin Heading Sensor for only $694 at NVN Marine! Same day dispatch before 3 p.m. Garmin Heading Sensor Technical Specifications
| Type: | Navigation & Marine Instruments | Gauges |
|---|---|
| Vendor: | Garmin |
| Weight: | 3.0 lbs |
| Shipping weight: | 3.0 lbs |
|---|---|
| Sizes boxes: | 1.00 (h) x 1.00 (w) x 1.00 (w) |
| Cubic Feet: | 1.0 |
| Returnable: | Yes |
| USPS First Class: | Yes |
| P65: | Yes |
For more details shipping policyion, please review our shipping policy and you can find our return and refund policy here.
