Glomex VHF/AIS/Radio Splitter - 12VDC Communication
VHF/AIS/Radio Splitter - 12V DC
The RA201 splitter allows you to use a single VHF antenna to simultaneously receive VHF, AM/FM and AIS; without sacrificing the performance of the VHF transceiver. This compact, economical and innovative device can be easily installed anywhere. It only requires a 12V DC power source with a maximum power consumption of just 25mA.
The device comes with one coaxial input from the VHF antenna and three outputs for VHF , AM/FM and AIS radio.
Thanks to an electronic circuit specifically developed by Glomex and the presence of an integrated preamplifier, the RA201 splitter is able to offer high performance in all three applications , ensuring efficient transmission and reception for VHF.
The maximum input power of the splitter for VHF is 100 watts, which is twice as much as most devices on the market.
Specifications:
- Impedance: 50 Ohm
- Radio reception frequency: 100 KHz to 200 MHz (GO/PO/OC /FM included)
- VHF transmit/receive frequency: 100 MHz to 200 MHz (marine/amateur radio)
- AIS receive frequency: 100 MHz to 200 MHz
- Integrated preamplifier: 15 dB shared on two inputs (to compensate for power loss)
- VHF power range: 0.2 watts min to 100 watts max
- Maximum power consumption: 25 mA
- Voltage source: 13.8 V (from 10 Vdc min. to 16 Vdc max)
- Cable supplied: 60 cm (2') red ( +) and black (-)
- Protection: Fast-blow fuse 5×20 mm -315 mA (included)
Connections:
- VHF antenna: SO-239 socket
- VHF: RG-58 C/U cable 60 cm (2') + male PL-259 connector
- Radio: RG -59 A/U cable 60 cm (2') + male Motorola connector
- AIS: RG-58 C/U cable 60 cm (2') + male BNC connector
- Case: llength 83 mm (3" ¼) x width 48 mm (2") x height 38 mm (3" ¼)
- Anti-spread metal-epoxy paint, high resistance to rust and oxidation
- Mounting: with 4 screws of 4 mm each
Connections:
- Connect the cable antenna with a PL-259 connector to the S0-239 jack on the RA201 splitter
- Connect the marine VHF radio to the RA201 using the RA201 marine "VHF radio" cable
- Connect the AM/FM radio receiver to the RA201 using the "AM/FM radio" cable from the RA201
- Connect AIS reception only to the RA201 using the "AIS receiver" cable from the RA201
- Connect the power supply to the splitter (can be hung on the boat's accessory panel)
Notes:
- Make sure the polarities of the power supply are not reversed: red to positive (+) and black to negative (-)
- Do not use without first connecting the antennado not VHF
- Do not reverse connections
- ONLY FOR "RECEIVER ONLY" AIS DEVICES. NOT SUITABLE FOR AIS TRANSPONDER DEVICES
This product can expose you to chemicals including LEAD, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For information,
VHF/AIS/Radio Splitter-12VDC The RA201 splitter uses a single VHF antenna to simultaneously receive VHF, AM/FM radio signals and AIS. time without sacrificing...
PRODUCT ID: 70233
SKU: NVN-70233
CSKU: CWR-70233
REWRITE: 81344-glomex-vhf-ais-radio-splitter- 12vdc
MPN: RA201
UPC: 8051566300938
ASIN:
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: Glomex VHF/AIS/Radio Splitter - 12VDC
NAME_EX: GLOMEX VHF - AIS - RADIO SPLITTER 12V
PTITRE: Glomex VHF/AIS/Radio Splitter - 12VDC
TYPE: Communication | Accessories
SELLER: Glomex Marine Antennas
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> WATERCRAFT PARTS & ACCESSORIES Glomex VHF /AIS/Radio Splitter - 12VDC RA201
Gtags:
Splitter |
GSpecs:
Glomex VHF/AIS/Radio Splitter - 12 V DC Product Description
VHF/AIS/Radio Splitter - 12 V DC
The RA201 splitter allows the use of a single VHF antenna to simultaneously receive VHF, AM/FM and AIS radio signals; without sacrificing the performance of the VHF transceiver. This compact, economical and innovative device can be easily installed anywhere. It only requires a 12V DC power source with a maximum power consumption of just 25mA.
The device comes with one coaxial input from the VHF antenna and three outputs for VHF , AM/FM and AIS radio.
Thanks to an electronic circuit specifically developed by Glomex and the presence of an integrated preamplifier, the RA201 splitter is able to offer high performance in all three applications , ensuring efficient transmission and reception for VHF.
The maximum input power of the splitter for VHF is 100 watts,which is twice as much as most devices on the market.
Specifications:
- Impedance: 50 Ohms
- Frequency radio reception frequency: 100 KHz to 200 MHz (GO/PO/OC/FM included)
- VHF transmission/reception frequency: 100 MHz to 200 MHz (marine/amateur radio)
- AIS reception frequency: 100 MHz to 200 MHz
- Integrated preamplifier: 15 dB shared on two inputs (to compensate for power loss)
- VHF power range: 0 .2 watts min to 100 watts max
- Maximum power consumption: 25 mA
- Voltage source: 13.8 V (from 10 Vdc min. to 16 Vdc max)
- Cable supplied: 60 cm (2') red (+) and black (-)
- Protection: 5×20 mm quick fuse -315 mA (included)
Connections:
- VHF antenna: SO-239 socket
- VHF: RG-58 C/U cable 60 cm (2 ' ) + male PL-259 connector
- Radio: RG-59 A/U cable 60 cm (2') + male Motorola connector
- AIS: RG-58 C cable/U 60 cm (2') + male BNC connector
- Housing: length 83 mm (3" ¼) x width 48 mm (2") x height 38 mm (3" ¼)
- Anti-spreading metal-epoxy paint, high resistance to wear and oxidation
- Mounting: using 4 screws of 4 mm each
Connections:
- Connect the cable antenna with a PL-259 connector to the S0-239 jack of the RA201 splitter
- Connect the marine VHF radio to the RA201 to the using the marine "VHF radio" cable from the RA201
- Connect the AM/FM radio receiver cable to the RA201 using the "AM/FM Radio" cable from the RA201
- Connect AIS reception only to the RA201 using the RA201 "AIS Receiver" cable
- Connect power to the power splitter (can be hooked to the boat's accessories panel)
Notes:
- Make sure the polarities of the power supply are not reversed: red to positive (+) and black to negative ( -)
- Do not useer without first connecting the VHF antenna
- Do not reverse the connections
- ONLY FOR "RECEIVER ONLY" AIS DEVICES. NOT SUITABLE FOR AIS TRANSPONDER DEVICES
This product can expose you to chemicals, including LEAD, which is known to the State of California to cause cancer , birth defects or other reproductive problems. For more information,
VHF/AIS/Radio Splitter-12VDC The RA201 splitter uses a single VHF antenna to simultaneously receive VHF radio signals, AM/FM and AIS. time without sacrificing...
Frequently Asked Questions (FAQ) about the Glomex VHF/AIS/Radio Splitter - 12VDC Who are Glomex marine antennas?
How to describe Glomex VHF/AIS/Radio Splitter - 12VDC?
What is the type of product?
Who are Glomex marine antennas? SinceFor over 30 years, Glomex has been a leader in technology and innovation. The main goal is to provide quality products at a fair price demonstrating this technology and innovation. Today, Glomex is a strong reality that has consolidated commercial partnerships around the world for more than 20 years with distributors, the largest shipyards and some of the largest boat builders.Ribe Glomex VHF/AIS/Radio Distributor - 12VDC? VHF/AIS/Radio Splitter-12VDC The RA201 splitter uses a single VHF antenna to receive VHF, AM/FM and AIS radio signals at the same time without sacrificing... What is the product type? Miscellaneous
Save $29 on the purchase of the Glomex VHF/AIS/Radio Splitter - 12 V DC for only $40 from NVN Marine! Same day dispatch before 3 p.m. Glomex VHF/AIS/Radio Splitter - 12VDC Technical Specifications
Type: | Comcommunication | Accessories |
---|---|
Supplier: | Glomex marine antennas |
Weight: | 0.8 lbs |
Type: | Miscellaneous |
Hip weight: | 0.8 lbs |
---|---|
Box sizes: | 2.00 (h) x 5.00 (w) x 9.00 (w) |
Cubic feet: | 90.0 |
Returnable: | Yes |
USPS First Class: | Yes |
P65: | Yes |
For detailed shipping terms, please see our shipping policy and you can find our shipping policy return and refund here.
- Glomex Twist-On PL-259 connector for RG-58C/U
- Glomex TNC Male Adapter/FME Male Connector
- Glomex Stainless Steel Straight Sliding Bracket for TV Antennas and weBBoat 4G Plus
- Glomex stainless steel masthead bracket
- Glomex satellite radio antenna with mounting kit
- Glomex PL-259 Rubber Connector Cover
- Glomex RA300 Antenna Adapter - Chrome - 5/8" - 24 Thread to 1" - 14 Thread