Humminbird 14M SILR Y - Left-Right Splitter Cable for SOLIX/APEX Side Imaging Marine Navigation & Instruments

The 14M ID SILR Y cable connects two side imaging transducers to a single sonar input on a Humminbird chartplotter. This Y-cable uses the two side imaging transducers to act as independent port and starboard side imaging sonar sources when boat hulls and transducer obstructions require separate transducers for a clear image on each side of the vessel. This cable mount provides the ability to install a separate high-speed Humminbird 2D transducer for high-speed depth reading and sonar performance. Alternatively, this cable can also be used to add an accessory Airmar 2D transducer to a Humminbird control head that also has a side or down imaging transducer connected at the same time. This cable supports transducer identification for automatic recognition and easy configuration of ac transducersAirmar accessories.

Attributes Humminbird 7201121

Compatibility: SOLIX and APEX models
Connection type: 14 pin
Length: 30 inches

Humminbird 7201121 Features and Benefits

Combines two side-mounted imaging transducers, acting as independent port and starboard side imaging sonar sources and can then be connected to a single control head Humminbird
Compatible with: All SOLIX and APEX Models
Mounting cable provides the option to install a separate high-speed Humminbird 2D transducer for high-speed depth reading and sonar performance
Allows installation of bilateral imaging transducers Connected to a single sonar input on a Humminbird chartplotter
One year limited warranty

Warranties Humminbird 7201121

One year limited warranty Humminbird.pdf

14 M SILR Y - SOLIX/APEX Cableleft-right side imaging splitter

The 14M ID SILR Y cable allows for two side imaging transducers to be connected to a single sonar input on a Humminbird chartplotter. This Y-cable uses the two side imaging transducers to act as independent port and starboard side imaging sonar sources when boat hulls and transducer obstructions require separate transducers for a clear image on each side of the vessel. This cable mount provides the ability to install a separate high-speed Humminbird 2D transducer for high-speed depth reading and sonar performance. Alternatively, this cable can also be used to add an accessory Airmar 2D transducer to a Humminbird control head that also has a side or down imaging transducer connected at the same time. This cable supports transducer identification for rapid rAutomatic recognition and easy configuration of Airmar accessory transducers.

Features:

Compatible with: All SOLIX and APEX models
Combines two side imaging transducers, acting as independent port and starboard side imaging sonar sources and can then be connected to a single Humminbird control head.
Includes transducer ID for Airmar accessory transducers when used in combination with 14M ID SIDB Y (#720111-1)
Cable length: 30" (76 cm)
Limited warranty one year

The 14M ID SILR Y cable connects two side imaging sensors to the single sonar input of the Humminbird plotter When the hull and transducer. are blocked and separate transducers are required to obtain clear images from each side of the vessel, this y-cable uses two side imaging transducers to.act as independent imaging sonar sources on the port and starboard sides. The mounting cable can install a separate high-speed Humminbird 2D sensor to achieve high-speed depth reading and sonar performance. Cable to add the Airmar 2D accessory sensor to the Humminbird control head, which is also connected to the side or down imaging sensor. The cable supports sensor identification, which can automatically identify and easily configure Airmar accessory sensors.
PRODUCT ID: 85782
SKU: NVN-85782
CSKU: CWR-85782
REWRITE : 96893-humminbird-14-m-silr-y-solix-apex
MPN: 720112-1
UPC: 082324055515
ASIN:
WSKU: HUM7201121
SSKU: HUM-720112- 1
KSKU: HUM7201121
GSKU:
MSKU:
LSKU: 137-7201121
NAME: Humminbird 14 M SILR Y - Left-Right Splitter Cable for SOLIX/APEX Side Imaging
br>EX_NAME: HUMMINBIRD 14M ID SILR Y DOUBLE SIDE IMAGE ADAPTER CABLE
PTITLE: Humminbird 14 M SILR Y - SOLIX/APEX Side Imaging Left-Right Splitter Cable
TYPE: Navigation and Marine Instruments | Accessories
SELLER: Humminbird
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> WATERCRAFT PARTS & ACCESSORIES

Humminbird 14 M SILR Y - SOLIX/APEX Side Imaging 30" 2D Splitter Dual Image Adapter Cable

Gtags:

Splitter
Humminbird

GSpecs:

Humminbird 14 M SILR Y - SOLIX/APEX left-right splitter cable for side imaging Product description

The SILR Y 14 M ID cable allows you to connect two side imaging transducers to a single sonar input on a plotter Humminbird cards. This Y-cable uses the two side imaging transducers to act as independent port and starboard side imaging sonar sources when boat hulls and transducer obstructions require separate transducers for a clear image on each side of the vessel. This cable mount provides the ability to install a separate high-speed Humminbird 2D transducer for high-speed depth reading and sonar performance. Alternatively, this cable can also be used to add an accessory Airmar 2D transducer to a Humminbird control head that also has a side or down imaging transducer connected at the same time. This cable supportsTransducer identification for automatic recognition and easy configuration of Airmar accessory transducers.

Humminbird 7201121 Attributes

Compatibility: SOLIX and APEX models
Connection type: 14 pin
Length: 30 inch

Humminbird 7201121 Features and Benefits

Combines two side-mounted imaging transducers together, acting as independent port and starboard imaging sonar sources and can then be connected to a single Humminbird control head.
Compatible with: all SOLIX and APEX models
The mounting cable provides the ability to install a high-performance Humminbird 2D transducer separate speed for high-speed depth reading and sonar performance.
Allows two side imaging transducers to be connected to a single sonar input on a tracHumminbird card maker

Humminbird Warranties 7201121

Humminbird One Year Limited Warranty.pdf

14M SILR Y - SOLIX/APEX Side Imaging Left-Right Splitter Cable

The 14M ID SILR Y cable allows two side imaging transducers to be connected to a single sonar input on a Humminbird plotter. This Y-cable uses the two side imaging transducers to act as independent port and starboard side imaging sonar sources when boat hulls and transducer obstructions require separate transducers for a clear image on each side of the vessel. This cable mount provides the ability to install a separate high-speed Humminbird 2D transducer for high-speed depth reading and sonar performance. Alternatively, this cable can also be used to add an accessory Airmar 2D transducer to a headHumminbird control unit that also has a side or down imaging transducer connected at the same time. This cable supports transducer identification for automatic recognition and easy configuration of Airmar accessory transducers.

Features:

Compatible with: All SOLIX and APEX models
Combines two side imaging transducers, acting as independent port and starboard imaging sonar sources and can then be connected to a single Humminbird control head.
Includes transducer ID for Airmar accessory transducers when used in combination with 14M ID SIDB Y (#720111-1)
Cable length: 30" (76 cm)
One year limited warranty

The SILR Y 14 M ID cable allows two side imaging sensors to be connected to the Humminbird chartplotter single sonar input When hull and transducer are blocked et as separate transducers are required to obtain clear images from each side of the vessel, this Y-cable uses two side imaging transducers to act as an independent port. and starboard side imaging sonar sources. The mounting cable can install a separate high-speed Humminbird 2D sensor to achieve high-speed depth reading and sonar performance. You can also use this cable to add the accessory Airmar 2D sensor to the Humminbird control. head, which is also connected to the side or down imaging sensor. The cable supports I.D sensor, which can automatically identify and easily configure Airmar accessory sensors.

Frequently Asked Questions (FAQ) about Humminbird 14 M SILR Y - Left-Right Splitter Cable for SOLIX/APEX Side Imaging Who is the Humminbird?
How to describe Humminbird 14 M SILR Y - Left-Right Splitter Cable for ImagingSOLIX/APEX side?
What is the length of the product?
What is the length of the product?
What is the weight of the product?
What is the compatibility of this product?
Who is the Humminbird? Humminbird is America's favorite sonar brand. For over 30 years, we have been a leader in providing recreational fishermen with exciting and innovative fishfinders, depth finders, marine radios and GPS systems. Humminbird has introduced many innovative and exciting products and features that are widely used today and will continue to introduce cutting-edge smart technology products in the future. How to describe Humminbird 14 M SILR Y - SOLIX/APEX Side Imaging Left-Right Splitter Cable? The 14M ID SILR Y cable connects two side imaging sensors to the single sonar input of the Humminbird chartplotter. When the hull and transducer are blocked and qhile separate transducers are required to obtain clear images from each side of the vessel, this Y-cable uses two side imaging transducers to act as independent port and starboard imaging sonar sources. The mounting cable can install a separate high-speed 2D Humminbird sensor to achieve high-speed depth reading and sonar performance. You can also use this cable to add the accessory Airmar 2D sensor to the Humminbird control head, which is also connected to the side or down imaging sensor. The cable supports sensor identification, which can automatically identify and easily configure Airmar accessory sensors. What is the length of the product? 30 inches

$19

Humminbird 14M SILR Y Left-Right Splitter Cable - SOLIX/APEX for Side Imaging

$46

Type:	Marine Navigation & Instruments \| Accessories
Supplier:	Humminbird
Weight:	0.6 lb

Shipping Weight:	0.6 pounds
Box sizes:	2.00 (h) x 8.00 (l) x 9.00 (l)
Cubic feet:	144,0
Returnable:	Yes
USPS First Class:	Yes