Humminbird XFM 9 20 Dual Beam Flush Mount Plastic Through-Through Transducer Marine Navigation & Instruments
Humminbird has built its reputation by designing and manufacturing superior quality and extremely reliable marine equipment. Your Humminbird is designed for trouble-free operation, even in the harshest marine environments. We encourage you to read this manual carefully to take full advantage of all the features and applications of your Humminbird product.
Humminbird 7101811 Attributes- Mounting Location: Hull Mount
- Number of pins: 7 pins
- Frequency range: 83/200 kHz Beam frequency
- Supported angle: 60/20 degrees Beam angle
- Cable Length: 30 Feet
- Plastic Flush Shell
- Design and manufacture premium quality, totally reliable marine equipment
- Designed for trouble-free use in even the harshest marine environments
- Made in USA
- One Year Limited Warranty
- 531953 -3_B PROPELLERStarting Notice.pdf
- 530759-2_E Flush Mount Transducer Installation Guide.pdf
- Humminbird 1-Year Limited Warranty.pdf
- 532651-1EN_A Transducer Resource Guide.pdf
- 530759-2_E Flush Mount Transducer Installation Guide.pdf
- 532651- 1EN_A Transducer Resource Guide.pdf
XFM 9 20 Dual Beam Flush Mount Plastic Through-Through Transducer
Features:
- Plastic flush mount through hull transducer
- Dual beam, 20/60 degree, 200/83 kHz
- Shaft diameter: 2", Bottom diameter: 3", Depth: 0.2" (under hull)
- Cable length: 20'
- No fairing blocke required
Compatibility:
- Current series HELIX 5, HELIX 7, HELIX 9, PiranhaMAX
- Discontinued Series 1100 Series, 300 Series, 500 Series, 600 Series, 700 Series, 800 Series, 900 Series
This product may Expose yourself to chemicals, including LEAD, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information,
Sensor mount is flush with the hull, no shroud is needed, and it extends 0.2 inch of the hull. Sonar coverage: 20/60°, working frequency: 200/83 kHz. Humminbird does not need a fairing to maintain a proper operating angle. It does not require a shroud to keep the device low and low. Once installed in a single hole in the hull, it can only form a deep projection of 3 width by 0,2. The sensor is made of plastic and its lifespan is longer than that of metal parts which will corrode over time; The sensor has two sonar coverage angles and frequencies, so you can choose between wide and narrow echoes depending on the angle. This could cause damage when launching and towing. It is not recommended for use on a tugboat.
PRODUCT ID: 57832
SKU: NVN-57832
CSKU: CWR-57832
REWRITE: 68943-humminbird-xfm-9- 20-dual-beam-flush
MPN: 710181-1
UPC: 082324506611
ASIN:
WSKU: HUM7101811
SSKU: HUM-710181-1
KSKU: HUM7101811
GSKU:
MSKU:
LSKU: 137-7101811
NAME: Humminbird HUMMINBIRD XFM 9 20
PTITLE: Humminbirdation and maritime instruments | Transducers
SELLER: Humminbird
ELECTRONICS> MARINE ELECTRONICS> FISH FINDERS
Humminbird Xfm 9 20 Flush Mount Plastic ThruHull Transducer double beam by Hodges Marine
Gtags:
| Humminbird |
GSpecs:
Humminbird Your Humminbird is designed for trouble-free operation, even in the harshest marine environments. We encourage you to read this manual carefully to take full advantage of all the features and applications of your Humminbird product.Humminbird 7101811 Attributes
- Mounting Location: Shell mount
- Number of pins: 7 pins
- Frequency range: Beam frequency 83/200 kHz
- Supported angle: Beam angle 60/ 20 degrees
- Cable length: 30 feet
- Recessed plastic hull
- Superior design and manufacturing, completely reliableMarine equipment
- Designed for trouble-free use, even in the harshest marine environments harder
- Made in the USA
- One-year limited warranty
- 531953-3_B HELIX Getting Started Notice.pdf
- 530759-2_E Flush Mount Transducer Installation Guide.pdf
- Humminbird 1-Year Limited Warranty. pdf
- 532651-1EN_A Transducer Resource Guide.pdf
- 530759-2_E Flush Mount Transducer Installation Guide.pdf
- 532651-1EN_A Transducer Resource Guide.pdf
XFM 9 20 Dual Beam Flush Mount Plastic Through-Through Transducer
Features:
- Flush mountingn plastic through hull transducer
- Dual beam, 20/60 degree, 200/83 kHz
- Shaft diameter: 2", bottom diameter: 3", depth: 0.2" (under hull)
- Cable length: 20'
- No fairing block requireduired
Compatibility:
- Current series HELIX 5, HELIX 7, HELIX 9, PiranhaMAX
- Discontinued series 1100 series, 300 series, 500 Series, 600 Series, 700 Series, 800 Series, 900 Series
This product may expose you to chemicals, including LEAD, which are recognized by the State of California may cause cancer, birth defects or other reproductive harm. For more information, go to P65Warnings.ca.gov.
Support. sensor is flush with the hull, no fairing is required and it extends 0.2 inch from the hull Sonar coverage: 20/60°, working frequency: 200/83 kHz Hu.mminbird does not need a fairing to maintain a proper operating angle. It does not require a shroud to keep the device low and low. Once installed in a single hole in the hull, it can only form a deep projection of 3 width by 0.2. The sensor is made of plastic and has a longer lifespan than metal parts which will corrode over time; the sensor has two sonar coverage angles and frequencies, so you can choose between wide and narrow echoes depending on the 'corner. This could cause damage when launching and towing. It is not recommended for use on a tugboat.
Humminbird - 10'
Humminbird EC M30 Transducer Extension Cable - 30'
Electric Marine Sealantastomer Sudbury - 10 oz cartridge - White
Sudbury elastomeric marine sealant - 10 oz cartridge - Black
Sudbury elastomeric marine sealant - 10 oz cartridge - Clear
3 oz tube of Sudbury elastomeric sealant (89 ml) - White
Tube of Sudbury elastomeric sealant 3 oz (89 ml) - Transparent
Tube of Sudbury elastomeric sealant 3 oz (89 ml) - black
BoatLIFE Life -Tube of Calk sealant - Does not shrink - 2.8 FL. Oz - White
Frequently Asked Questions (FAQ) About the Humminbird XFM 9 20 Dual Beam Flush Mount Plastic Thru-Hull Transducer Who is the Humminbird?
How Describe the Humminbird XFM 9 20 Dual Beam Flush Mount Plastic Through-Hull Transducer?
What is the type? of the product?
What is the weight of the product?
Speed function included in the product?
How to mount or what is the mounting style of the Humminbird XFM 9 20 Dual Beam Flush Mount Plastic Transducer crosshealth?
What is the length of the cable (feet)?
What is the imagination type of the product?
What is the length of the cable?
Is this product supports CHIRP and what is its type?
Who is the Humminbird? Humminbird is America's favorite sonar brand. For over 30 years, we have been a leader in providing recreational fishermen with exciting and innovative fishfinders, depth finders, marine radios and GPS systems. Humminbird has introduced many innovative and widely used products and features today, and will continue to introduce cutting-edge intelligent technology products in the future. How to describe the Humminbird XFM 9 20 Dual Beam Plastic Flush Mount Through-Thru Transducer? The sensor mount sits flush with the hull, no shroud is needed, and it extends 0.2 inches from the hull. Sonar coverage: 20/60°, working frequency: 200/83 kHz. Humminbird did notneed fairing to maintain proper operating angle. It does not require a shroud to keep the device low and low. Once installed in a single hole in the hull, it can only form a deep projection of 3 width by 0.2. The sensor is made of plastic and its lifespan is longer than that of metal parts which will corrode over time; The sensor has two sonar coverage angles and frequencies, so you can choose between wide and narrow echoes depending on the angle. This could cause damage when launching and towing. It is not recommended for use on a tugboat. What is the type of product? Dual beam, 20/60°, 200/83 kHz. Handle diameter: 2", Bottom diameter: 3", Depth: 0.2" (under the shell) What is the weight of the product? 1.058Speed function included in the product? NoHow to assemble or what is the mounting style of the plastic through-hole transducer to double harness Humminbird XFM 9 20How long is the cable (feet)? How imaginative is the product? product supporting CHIRP and what is the type? No
Save $46 when you purchase the Humminbird XFM 9 20 Dual Beam Flush Mount Plastic Through-Through Probe for only $83at NVN Marine! Same day dispatch before 3:00 p.m. Humminbird Dual Beam Flush Mount Plastic Thru-Hull Transducer Technical Specifications
| Type: | Navigation and marine instruments | Transducers |
|---|---|
| Supplier: | Humminbird |
| Weight: | 1.15 lbs |
| Gear included: | No |
| Mounting style: | Through hull |
| Imagination: | Standard |
| Chirp: | No |
| C lengthcable (feet): | 20' |
| Product manual: | Download the PDF |
| Product installation: | Download the PDF |
1.15 lbs
3.00 (h) x 7.00 (w) x 9.00 (w)
189.0
Yes
Yes
For detailed shipping please see our shipping policy and you can find our return and refund policy here.
