Icom M410BB Black Box VHF With HM195GB Black Communication

icom M411BB VHF Black Box with Black CommandMic HM195GB

Model: M410 BB 11 USA

The Icom M410BB is a flexible fixed black box mount that provides VHF communications for vessels with limited pilotage space. The supplied CommandMic™ controls the radio for essential communications on the water.

The M410BB consists of a CommandMic™ and a black box RF unit. Use the CommandMic™ for all operations, including DSC. Install the RF unit out of sight, position it up to 60 feet (18.3 m)* from the CommandMic™.

Add an additional CommandMic™ to expand communication points for boats requiring a second communications station. This is ideal for boats requiring communication between the cockpit and other areas of the boat. Access intercom functions for one-on-one or one-on-one communications on the boat.

On the rear of each CommandMic™ is a DS buttonC ideally located. Once triggered, the M410BB transmits a DSC alert signal to nearby vessels with your MMSI* and GPS.r vessel position.

The NMEA 2000 network provides plug-and-play data communication. play to interconnect other marine equipment such as an MFD (multifunction display). The radio can send AIS position, GNSS (GPS), DSC call and radio channels to other equipment.

Built-in 15W amplifier increases audio output by a high external speaker. The RX one-way hailer feature allows you to broadcast radio traffic through the hailer speaker to listen to radio traffic on the bridge or tower. You can also emit foghorn signals from the bullhorn speaker.

The active noise cancellation feature digitally removes background noise from audio transmission and reception to provide clear communications in maritime environments bruyants.

Specifications
Adjacent channel powerAdjacent channel power

General
Usable channels	USA, INT, CAN, WX channels
Power supply requirement	13.8 V DC nominal (11.7 ~ 15.9 V DC) (Negative ground)
Current consumption (at 13.8 V DC)	Max. power - 5.5 A Max. RX Max. audio - 1.5 A (one CommandMic™) 4.0 A (two CommandMic™ and one RX loudspeaker)
Operating temperature range	—20°C ~ 60°C, —4°F ~ 140°F
Antenna impedance	80 ohms nominal
Weight (approximately)	RF unit - 890 g; 2 lbs CommandMic™ - 400 g; 14.1 oz
Transmitter
Output power (at 13.8 V DC)	25 W, 1 W (high, low)
Max. frequency deviation	±5 kHz
Frequency tolerance	±0.5 kHz
Spurious emissions	Less than —70 dBc (high power), less than —56 dBc (low power)
Residual modulation	More than 40 dB

td>	More than 70 dB
Receiver
FM sensitivity (at 12dB SINAD)	0.22 µV typical
DSC sensitivity (at 1% BER )	—7 dBµ typical emf
FM adjacent channel selectivity	More than 70 dB	td>
DSC adjacent channel selectivity (1% BER)	Over 73 dBµ emf
FM spurious response	More than 70 dB
DSC spurious response (1% BER)	More than 73 dBµ emf
FM intermodulation	More than 75 dB
DSC intermodulation (1 % BER)	More than 68 dBµ emf
Mood and noise	More than 40 dB

Box contents:

IC-M410BB
DC power cable (2 m )
Microphone stand
CConnection cable, OPC-1540 (6.1 m, 20 ft)
CommandMic™, HM-195GB
Connector cap
Mounting base

Icom M410BB Black Box VHF with HM195GB black Product description

icom M411BB Black Box VHF with HM195GB Black CommandMic

Model: M410 BB 11 USA

The M410BB from Icom is a flexible black box fixed mount that provides VHF communications for vessels with limited helm space. The supplied CommandMic™ controls the radio for essential communications on the water.

Add an additional CommandMic™ to expand communication points for boats requiring a second communications station. This is ideal for boats requiring communication between the cockpit and other areas of the boat. Access intercom features for one-on-one or one-on-one communications on the boat.

On the back of each CommandMic™ is a conveniently located DSC button. Once triggered, the M410BB transmits a DSC alert and reports to nearby vessels your vessel's MMSI* and GPS position.

The NMEA 2000 network provides plug-and-play data communication to interconnect other marine equipment such as an MFD (Multi-Function Display). The radio can send AIS position, GNSS (GPS), DSC call and radio channels to other equipment.

The active noise cancellation feature digitally removes background noise from audio transmission and reception to ovendeliver clear communications in noisy maritime environments.

Specifications

General
Usable channels	USA, INT, CAN , WX channels
Power requirements	13.8 V DC nominal (11.7 ~ 15.9 V DC) (ground negative)
Current consumption (at 13.8 V DC)	TX Max. power - 5.5 A Max. RX Max. audio - 1.5 A (one CommandMic™) 4.0 A (two CommandMic™ and one RX loudspeaker)
Operating temperature range	—20°C ~ 60°C, —4°F ~ 140°F
Antenna impedance	80 ohms nominal
Weight (approximately)	RF unit - 890 g; 2 lbs CommandMic™ - 400 g; 14.1 oz
Transmitter
Output power (at 13.8V DC)	25 W, 1 W (high, low)
Max. frequency deviation	±5 kHz
Frequency tolerance	±0.5 kHz
Spurious emissions	Less than —70 dBc (high power), less than —56 dBc (low power)
Residual modulation	More than 40 dB
Adjacent channel power	More than 70 dB
Receiver
FM sensitivity (at 12dB SINAD)	0.22 µV typical
DSC sensitivity (at 1% BER)	—7 dBµ emf typical
FM adjacent channel selectivity	More than 70 dB
DSC adjacent channel selectivity (1% BER)	More than 73 dBµ emf
FM spurious response	More than 70 dB
Responsese parasitic DSC (1% BER)	More than 73 dBµ emf
FM intermodulation	More than 75 dB
DSC intermodulation (1% BER)	More than 68 dBµ emf
Mood and noise	More than 40 dB

What's in the box :

IC-M410BB
DC power cable (2 m)
Microphone holder
Reference cable connection, OPC-1540 (6.1 m, 20 ft)
CommandMic™, HM-195GB
Connector cap
Mounting base

$379

Icom M410BB Black Box VHF with HM195GB Black

649 $

Type:	Communication \| VHF - Fixed mounting
Supplier:	Icom
Weight:	5.0 lbs

Shipping Weight:	5 .0 lb
Box sizes:	1.00 (h) x 1.00 (w) x 1 .00 (l)
Cubic feet:	1.0
Returnable:	Yes
USPS First Class:	Yes
P65:	Yes