Jabsco Impeller Kit 10 Blades Neoprene 2-¼" Marine Plumbing & Ventilation

Impeller kit

Material:Neoprene
Drive type:Spline drive
Number of blades: 10
Dimensions:
Diameter:2-1/4"
Shaft width:5/ 8"
Shaft Diameter:2
Insert Material:Brass

Jabsco flexible impellers can be installed on most makes and models of bronze flexible impeller engine cooling, bilge, transfer and general purpose pumps.
Jabsco flexible impellers are subject to quality processes rigorous to ensure reliable, efficient and long-lasting performance.

Replace all turbines at least once a year, or sooner, depending on engine function. When installed correctly, a wheel can last for several years, but it is always advisable to follow a preventative rather than corrective maintenance program.

Replacing wheels iseasy. By removing the end cover screws, it is possible to remove the impeller using a Jabsco impeller removal tool or channel. Vice grip pliers, to grip the hub of the turbine. Do not use screwdrivers as they may damage the face of the pump body, causing leaks, and they can be dangerous in confined spaces.

Always have spare impellers on board in emergency case.The turbine is one of the most essential components of the engine cooling system and should always be treated as such.

Always grease new impellers. Firstly, it makes it easier to install the impeller into the pump bore, and secondly, it gives extra protection to the impeller when initial priming. After replacing the seal and end cover, the pump is ready for use.

This product can expose you to chemicals, including LEAD, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to P65Warnings.ca.gov.

Neoprene is the most commonly used material and is suitable for occasions where only a small amount of engine oil or diesel is present. Use an acrylic impeller for pumping bilge water and for...
PRODUCT ID: 50239
SKU: NVN-50239
CSKU: CWR-50239
REWRITE: 61350-jabsco -impeller-kit-10 -blade
MPN: 18777-0001-P
UPC: 671880574860
ASIN: B00H4BFLUC
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU: 6-187770001P
NAME: Jabsco Impeller Kit - 10 Blades - Neoprene - 2-¼"
NAME_EX: JABSCO NEOPRENE Impeller KIT 10 Blades 2 1/4 DIA 2 W
PTITRE: Jabsco Turbine kit - 10 blades - Néoprene - 2-¼"
TYPE: Marine Plumbing & Ventilation | Turbines
SELLER: Jabsco
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> WATERCRAFT PARTS & ACCESSORIES
BISS Basic
Jabsco 18777-0001-P, Neoprene, Drive Type 7, 10Blade, 2-1/4 Diameter, 2 Width, 5/8 Shaft, Brass Insert
BISS Basic Kit Jabsco turbine - 10 blades - Neoprene - 2-1/4"
BISS Basic
Gtags:

Jabsco

GSpecs:

Jabsco Impeller Kit - 10 Blades - Neoprene - 2-¼" Product Description Impeller Kit

Material:Neoprene
Type drive:Spline drive
Number of blades:10
Dimensions:
Diameter:2 -1/4"
Shaft Width:5/8"
Shaft Diameter:2
Material Insert:Brass

Jabsco flexible impellers can be installed on most makes and models of cooling, bilge, transfer and general purpose flexible impeller engine pumps made of bronze.
Jabsco flexible impellers undergo rigorous quality processes to ensure long-lasting reliability, efficiency and durability.

Replace all impellers at the latest. least once a year, or sooner, depending on the function of the motor. When installed correctly, a wheel can last several years, but it is always advisable to respe.implement a preventive rather than corrective maintenance program.

Replacing the impellers is easy. By removing the end cover screws, it is possible to remove the impeller using either a Jabsco turbine removal tool, or channel lock pliers, to grip the turbine hub. Do not use screwdrivers as they may damage the face of the pump body, causing leaks, and they can be dangerous in confined spaces.

Always have spare impellers on board in emergency case.The turbine is one of the most essential components of the engine cooling system and should always be treated as such.

Always grease new impellers. Firstly, it makes it easier to install the impeller into the pump bore, and secondly, it gives extra protection to the impeller when initial priming. After replacing the gasket and ex coverhopper, the pump is ready for use.

This product can expose you to chemicals, including LEAD, which is known to the State of California to cause cancer, birth defects or other reproductive problems. For more information, go to P65Warnings.ca.gov.

Neoprene is the most commonly used material and is suitable for occasions where only a small amount of engine oil or diesel is present. Use an acrylic impeller for pumping bilge water and for...

Frequently Asked Questions (FAQ) about Jabsco Impeller Kit - 10 Blades - Neoprene - 2-¼" Which is the Jabsco?
How to describe the Jabsco Impeller Kit - 10 Blades - Neoprene - 2-¼"?
Who is the Jabsco? Jabsco is one of the world's leading manufacturers of products for the recreational marine market, including water systems, engine cooling pumps, floodlights andt marine litter systems. Wherever a pump is needed on board a pleasure boat or small work boat, for engine cooling, bilge pumping, fresh or waste water treatment, Jabsco worldwide will provide top quality product. How to describe Jabsco Impeller Kit - 10 Blades - Neoprene - 2-¼"? Neoprene is the most commonly used material and is suitable for occasions where only a small amount of engine oil or diesel is present. Use an acrylic impeller for pumping bilge water, and for...

Save $16 on the purchase of the Jabsco Impeller Kit - 10 blades - Neoprene - 2-¼"for only $33 from NVN Marine! Same day dispatch before 3 p.m. Jabsco turbine kit - 10 blades - Neoprene - 2-¼" Videos Jabsco turbine kit - 10 blades - Neoprene - 2-¼" Technical specifications.

Type:	Plumbing and ventilationmarines \| Turbines
Supplier:	Jabsco
Weight:	0.4 lbs

Jabsco Impeller Kit - 10 Blades - Neoprene - 2-¼" User ReviewsJabsco Impeller Kit - 10 Blades - Neoprene - 2-¼" Shipping & Returns

Shipping Weight:	0.4 lbs
Box sizes:	3.00 (h) x 4.00 (w) x 8.00 ( l)
Cubic feet:	96.0
Returnable:	Yes
USPS First Class:	Yes
P65:	Yes