Jabsco Impeller Kit 6 Blades Nitrile 2" Diameter Marine Plumbing & Ventilation

Turbine kit

Material:Nitrile
Drive type:Single flat drive
Number of blades:6
Dimensions:

Diameter:2"
Shaft Width:5/16"
Shaft Diameter:7/8"

Insert Material:Plastic

Jabsco flexible impellers can be installed on most makes and models of engine cooling pumps, bilge, transfer and general purpose flexible bronze impeller.
Jabsco flexible impellers undergo rigorous quality processes to ensure reliable, efficient and long-lasting performance.

Replace all wheelsat least once a year, or sooner, depending on the operation of the engine during installation correcting a turbine can take several years, but it is always advisable to stick to one. preventive rather than corrective maintenance program.

Replacing the impellers is easy. By removing the screw end of the cover, it is possible to remove the impeller using either a Jabsco impeller removal tool, or channel lock pliers, to grasp the turbine hub. Do not use screwdrivers as they may damage the face of the pump body, causing leaks, and they can be dangerous in confined spaces.

Always have spare impellers on board in emergency case.The turbine is one of the most essential components of the engine cooling system and should always be treated as such.

Always grease new impellers. Firstly, it makes it easier to install the impeller into the pump bore, and secondly, it gives extra protection to the impeller when initial priming. After replacing the seal and end cover, the pump is ready for use.

WARNING: This product can expose you to chemicals, including LEAD, which is known to the State of California to cause cause cancer, birth defects, or other reproductive harm. For more information, go to P65Warnings.ca.gov.

Neoprene is the most commonly used material and is suitable for occasions where only a small amount of engine oil or diesel is present. The acrylic impeller is used for bilge pumping and is used for...
PRODUCT ID: 50243
SKU: NVN-50243
CSKU: CWR-50243
REWRITE: 61354-jabsco- impeller-kit-6 -blade
MPN: 6303-0003-P
UPC: 671880570770
ASIN: B000O8B5YS
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU: 6-63030003P
NAME: Jabsco Impeller Kit - 6 blades - Nitrile - 2" diameter
NAME_EX: JABSCO NITRILE IMPELLER KIT 6 blades 2" DIA X 7/8 W
PTITRE: Jabsco Turbine Kit - 6 blades - Nitrile - 2" diameter
TYPE: Marine Plumbing and Ventilation | Turbines
SELLER: Jabsco
VEHICLES AND PARTS> VEHICLE PARTS AND ACCESSORIES> PARTS AND POWERWATER ACCESSORIES
Sports
Jabsco 6303-0003-P, Nitrile, Drive Type 4, 6 Blades, 2 Diameters, 7/8 Width, 5/16 Shaft, Plastic Insert , black
Jabsco Impeller Kit - 6 Blades - Nitrile - 2" Diameter
Sports
Gtags:

Jabsco

GSpecs:

Jabsco Impeller Kit - 6 Blades - Nitrile - 2" Diameter Product Description Turbine Kit

Material:Nitrile
Type drive:Single flat drive
Number of blades:6
Dimensions:

Diameter: 2"
Shaft Width:5/16"
Shaft Diameter: shaft:7/8"

Insert material:Plastic

Jabsco flexible turbines can be installed on most makes and models of bronze flex impeller, engine cooling, bilge, transfer and general purpose pumps.
Jabsco flex impellers undergo rigorous quality processes to ensure reliable performance , efficient and durable.

Replace all wheels at least once a year. , or earlier, depending on engine load. When installed correctly, a wheel can last several years, but it is always advisable to readhere to a preventative rather than corrective maintenance program.

Replacing the impellers is easy. By removing the end cover screws, it is possible to remove the impeller using either a Jabsco turbine removal tool, or channel lock pliers, to grip the turbine hub. Do not use screwdrivers as they may damage the face of the pump body, causing leaks, and they can be dangerous in confined spaces.

Always have spare impellers on board in emergency case.The turbine is one of the most essential components of the engine cooling system and should always be treated as such.

Always grease new impellers. Firstly, it makes it easier to install the impeller into the pump bore, and secondly, it gives extra protection to the impeller when initial priming. After replacing the gasket and the coverxend, the pump is ready for use.

This product can expose you to chemicals, including LEAD, which is known to the State of California to cause cancer, birth defects or other reproductive problems. For more information, go to P65Warnings.ca.gov.

Neoprene is the most commonly used material and is suitable for occasions where only a small amount of engine oil or diesel is present. The Acrylic Impeller is used for bilge pumping and used for...

Frequently Asked Questions (FAQ) about Jabsco Impeller Kit - 6 Blades - Nitrile - 2" Diameter Who is the Jabsco?
How to describe the Jabsco turbine kit - 6 blades - Nitrile - 2" diameter?
Who is Jabsco? Jabsco is a leading global manufacturer of products for the recreational marine market, including water systems, engine cooling pumps,searchlights and marine litter systems. Wherever a pump is needed on board a pleasure boat or small work boat, for engine cooling, bilge pumping, fresh or waste water treatment, Jabsco worldwide will provide top quality product. How to Describe Jabsco Impeller Kit - 6 Blades - Nitrile - 2" Diameter? Neoprene is the most commonly used material and is suitable for occasions where only a small amount of engine oil or diesel is present. The acrylic impeller is used for bilge pumping and is used for...

Save $12 when you purchase the Jabsco Impeller Kit - 6 Blades - Nitrile - 2" diameter for only $23 from NVN Marine! Same day dispatch before 3:00 p.m. Jabsco turbine kit - 6 blades - Nitrile - 2" diameter Videos Jabsco turbine kit - 6 blades - Nitrile - 2" diameter Technical specifications. Type:

Marine Plumbing and Ventilation | Turbines

Supplier:

Jabsco

Weight:

0.1 lb

Jabsco Impeller Kit - 6 Blades - Nitrile - 2" Diameter User ReviewsJabsco Impeller Kit - 6 Blades - Nitrile - 2" Diameter Shipping & Returns

Shipping Weight:	0.1 lbs
Box sizes:	1.00 (h) x 4.00 (w) x 6.00 ( l)
Cubic feet:	24.0
Returnable:	Yes
USPS First Class:	Yes
P65:	Yes