K2 Pumps 1/2 HP Contractor Series Cast Iron Effluent Pump 115V SWF05004K Sump Pumps Farm & Ranch

The K2 Pumps CONTRACTOR SERIES 1/2 HP Effluent Pump is designed for residential and light commercial dewatering. Handles 3/4 inch spherical solids with nonpcog vortex impeller. Manual operation. Typical applications include Onsite or Septic Tank applications, Enhanced Flow STEP systems, Dewatering and Low pressure pipe (LPP).

Excellent for residential and light commercial dewatering
Rugged cast iron pump housing, pump base, motor housing and impeller
Ceramic and graphite mechanical shaft seals, stainless steel motor shaft
Discharge flow 60 GPM at 10 ft. of head
Maximum head 70 ft.
115V PSC motor, oil-cooled, 60 Hz, 3450 RPM
1-1/2 in. NPT Discharge with 2 in. flange
Comes with a 20 ft. power cord
3 Year Warranty

K2 Pumps 1/2 HP Contractor Series Cast Iron Effluent Pump 115V SWF05004K Sump Pumps Farm & Ranch> Tanks & Pumps> Water Pumps> Sump Pumps

Specification	Description
Brand	K2 Pumps
Country of Origin	Imported
Amperage	15 Amp
Basin Diameter	0 N/A
Body Material	Cast iron
Compatible Pipe Material	PVC
Discharge Connection	Threaded Female
Discharge Port Diameter	1-1/2 in.
Discharge Rate at 0 ft.	61.7 GPM
Discharge Rate at 10 ft.	60 GPM
Engine Displacement	0 N/A
Features	Non clog vortex impeller, Operates up to 130 degrees
Horsepower	1/2 HP
Hose Diameter	1-1/2 in.
Impeller Material	Cast iron
Inlet Connection	None
Inlet Diameter	7.9 in.
Maximum Flow Rate	61.7 GPM
Maximum Head Lift	70 ft.
Maximum Operating Pressure	0 N/A
Maximum Operating Temperature	130 deg.
Maximum Solids Diameter	3/4 in.
Maximum Suction Lift	70 ft.
Minimum Operating Pressure	0 N/A
Minimum Operating Temperature	32 deg.
Power Cord Length	20 ft.
Power Type	Corded/Plug-in
Product Height	19.49 in.
Product Length	9.25 in.
Product Weight	77.2 lb.
Product Width	13.58 in.
Pump Mechanism	Centrifugal
Motor Type	Permanent Split Capacitor (PSC)
Switch-Off Height	0 N/A
Switch-On Height	0 N/A
Voltage	115 V
Warranty	3 Years
Manufacturer PartNumber	SWF05004K

K2 Pumps 1/2 HP Contractor Series Cast Iron Effluent Pump, 115 Volt, SWF05004K Specifications expand/collapse Specification Description Brand K2 Pumps Country of Origin Imported Amperage 15 Amp Basin Diameter 0 N/A Body Material Cast Iron Hose Material PVC Compatible Discharge Connection Female Threaded Discharge Port Diameter 1-1/2 in. Discharge rate at 0 ft. Discharge rate of 61.7 GPM at 10 ft. 60 GPM Engine Displacement 0 N/A Features Unclogged Vortex Impeller, Operates up to 130 Degrees Horsepower 1/2 HP Hose Diameter 1-1/2 in. Impeller Material Cast Iron Inlet Connection None Inlet Diameter 7.9 in. Maximum Flow Rate 61.7 GPM Maximum Head Lift 70 Feet Maximum Operating Pressure 0 N/A Maximum Operating Temperature 130 degrees. Maximum diameter of solids 3/4 in. Maximum suction height 70 feet. Minimum operating pressure 0 N/A Minimum operating temperature 32 degrees. Power cord length 20 ft. Wired/Plug-in Power Type P Heightproduct 19.49 in. Product length 9.25 in. Product weight 77.2 lbs. Product width 13.58 in. Pump Mechanism Motor Type Centrifugal Permanent Split Capacitor (PSC) Shut-off Head 0 N/A Start-Height 0 N/A Voltage 115 V 3 Year Warranty Manufacturer Part Number SWF05004K