Lectrotab XKA Aluminum Alloy Decorative Tab Kit with ALC-1 Control - 12 x 18 Bestsellers

XKA aluminum alloy trim tab kit with ALC-1 control - 12 x 18

Lectrotab aluminum alloy trim tabs are specially designed to meet to the needs of aluminum hulled boats and are an economical option for all boats. All aluminum alloy tabs are manufactured with an extremely strong "no break" polypropylene hinge. All aluminum tabs are sealed with a corrosion resistant epoxy coating.

Combined with a precision actuator, this kit is designed to combine quiet operation with a non-hydraulic, maintenance-free design. The unit is corrosion free, ensures very precise tab positioning, provides maximum lifting force and is completely self-contained for easy installation. The actuator assembly is packaged in a permanently sealed non-metallic enclosure. No componentmust be installed inside the boat.

Most importantly, unlike hydraulic trim tabs, there is no oil leaking. The actuator incorporates a standard or low profile transom mounting bracket.

Auto Level Control (ALC) will automatically adjust your trim tabs to maintain a level boat for a more comfortable and enjoyable ride. Additionally, ALC automatically corrects for side-to-side roll and fore-and-aft pitch to enhance your navigation experience and improve your fuel economy.

Features:

All tabs are sealed with a corrosion-resistant epoxy coating
Strength equivalent to of 10 gauge stainless steel
"No Break" polypropylene hinge tested to 300,000 cycles up to 90° bend without failure
Top seal locationThe cylinder core cannot be damaged due to a dirty cylinder or barnacle growth
Uses an internal pressure equalization system
The internal braking system prevents unwanted tongue movement while underway or in reverse
Quiet operation
Actuators are fully load tested to push at 1,000 pounds of force
Non-metallic external structure that cannot corrode and will not deteriorate in sunlight or water

Technical specifications:

Trim Tab Size (L x W) - 12" x 18" (30 x 46 cm)
Boat Length - 20' to 40' (6 to 12 M)
Trim Material - Marine Grade 6005-T5 Aluminum Alloy
Actuator DC Voltage - 12V
Actuator Stroke Length - 2, 25" (57 mm)
Actuator cable length - 23 ft (7 M)
Vertical height of aactuator - 11.875" (302 mm)
Control dimensions (L x H) - 3.15" x 3.07" (80 x 77 mm)
Hole cutout mounting width of the control - 2" (50 mm)
Operating voltage of the control - 12 or 24 V

In the Box:

One (1) Auto Leveling Control
Two (2) Aluminum Alloy Tabs
Two (2) actuators with 23' (7M) cables
Instruction Manual

*Sold as a kit

Lectrotab XKA aluminum alloy trim tab kit with ALC-1 control - 12 x 18 Product description

XKA aluminum alloy trim tab kit with ALC-1 control - 12 x 18

Lectrotab aluminum alloy trim tabs are specifically designed to meet the needs of aluminum hulled boats and are an economical option for all boats. All aluminum alloy tabs are manufactured with an extremely strong "no break" polypropylene hinge. All aluminum tabs are sealed with a corrosion resistant epoxy coating.

Combined with a precision actuator, this kit is designed to combine quiet operation with a non-hydraulic, maintenance-free design. The unit is corrosion free, ensures very precise tab positioning, provides maximum lifting force and is completely self-contained for installation.n easy. The actuator assembly is packaged in a permanently sealed non-metallic enclosure. No components should be installed inside the boat.

Most importantly, unlike hydraulic trim tabs, there is no oil leaking.Utah. The actuator incorporates a standard or low profile transom mounting bracket.

Features:

All tabs are sealed with a corrosion-resistant epoxy coating
Strength equivalent to 10 gauge stainless steel Poly hinge"No Break" propylene tested to 300,000 cycles up to 90° bend without failure
The upper cylinder seal location cannot be damaged due to a dirty cylinder or barnacle growth
Uses an internal pressure equalization system
Internal braking system prevents unwanted tongue movement while driving or reversing
Quiet operation
Actuators are fully load tested to push at 1,000 pounds of force
Non-metallic external structure that cannot and will not corrode not in the sun or under water

Technical specifications:

Trim tab size (L x W) - 12" x 18" (30 x 46 cm)
Boat length - 20' to 40' (6 to 12 M)
Trim material - Marine Aluminum alloy quality 6005-T5
Actuator DC voltage - 12 V
Stroke length de Actuator - 2.25" (57 mm)
Actuator Cable Length - 23' (7 M)
Actuator Vertical Height - 11.875" (302 mm)
Control Dimensions (W x H) - 3.15" x 3.07" (80 x 77 mm)
Control Mounting Hole Cutout control - 2 inches (50 mm)
Control operating voltage - 12 or 24 V

In the box:

One (1) automatic leveling control
Two (2) aluminum alloy tabs
Two (2) actuators with 23' (7 M) cables
Instruction manual

*Sold as a kit

Save $316 when you purchase the Lectrotab XKA Aluminum Alloy Decorative Tab Kit with ALC-1 Control - 12 x18 for only $1,791 from NVN Marine! Same day dispatch before 3 p.m. Lectrotab XKA Aluminum Alloy Decorative Tab Kit with ALC-1 Control - 12 x 18 Technical Specifications

Type:	Boat equipment \| Compensating tabs
Supplier:	Lectrotab

Lectrotab XKA Aluminum Alloy Trim Tab Kit with ALC-1 Control - 12 x 18 User Reviews Lectrotab

For detailed shipping policy, please check our shipping policy and you can find our return and refund policy here.