Lectrotab XKA Aluminum Alloy Decorative Tab Kit with MLC-1 Control - 12 x 18 Bestsellers

XKA aluminum alloy trim tab kit with MLC-1 control - 12 x 18

Lectrotab aluminum alloy trim tabs are specially designed to meet to the needs of aluminum hulled boats and are an economical option for all boats. All aluminum alloy tabs are manufactured with an extremely strong "no break" polypropylene hinge. All aluminum tabs are sealed with a corrosion resistant epoxy coating.

Combined with a precision actuator, this kit is designed to combine quiet operation with a non-hydraulic, maintenance-free design. The unit is corrosion free, ensures very precise tab positioning, provides maximum lifting force and is completely self-contained for easy installation. The actuator assembly is packaged in a permanently sealed non-metallic enclosure. No componentmust be installed inside the boat.

Most importantly, unlike hydraulic trim tabs, there is no oil leaking. The actuator incorporates a standard or low profile transom mounting bracket.t.

The Lectrotab MLC-1 is a microprocessor-based trim tab control that can move both tabs simultaneously with the press of a single button. It includes LED tab position indicators that will automatically dim in the dark and light up in the sun.

Features:

All tabs are sealed with a corrosion-resistant epoxy coating
Strength equivalent to of 10 gauge stainless steel
"No Break" polypropylene hinge tested to 300,000 cycles up to 90° bend without failure
Top seal location of the cylinder cannot be damaged due to a veeclogged water or barnacle growth
Uses an internal pressure equalization system
The internal braking system prevents unwanted movement of the tongue while driving or reverse
Quiet operation
Actuators are fully load tested to push at 1,000 pounds of force
Non-metallic external structure that cannot corrode and will not deteriorate in the sun or under water

Technical specifications:

Trim size (L x W) – 12" x 18" (30 x 46 cm)
Boat Length – 20' to 40' (6 to 12 M)
Trim Tab Material - Aluminum Alloy Marine grade 6005-T5 aluminum
Actuator DC Voltage - 12V
Actuator Stroke Length - 2.25" (57mm)
Actuator Cable Length - 23' (7M)
Actuator Vertical Height - 11.875" (302mm)
Control Dimensions ( L xH) - 3.15" x 3.07" (80 x 77 mm)
Control mounting hole cutout - 2" (50 mm)
Operating voltage of the control - 12 or 24 V

In the box:

One (1) manual leveling control
Two (2) aluminum alloy tabs
Two (2) actuators with 23' (7M) cables
Instruction manual

*Sold as a kit

Lectrotab XKA aluminum alloy trim tab kit with MLC-1 control - 12 x 18 Product description

XKA aluminum alloy trim tab kit with MLC-1 control - 12 x 18

Lectrotab aluminum alloy trim tabs are specifically designed to meet the needs of aluminum hulled boats and are an economical option for all boats. All aluminum alloy tabs are manufactured with an extremely strong "no break" polypropylene hinge. All aluminum tabs are sealed with a corrosion resistant epoxy coating.

Combined with a precision actuator, this kit is designed to combine quiet operation with a non-hydraulic, maintenance-free design. The unit is corrosion free, ensures very precise tab positioning, provides maximum lifting force and is completely self-contained for easy installation.it's easy. The actuator assembly is packaged in a permanently sealed non-metallic enclosure. No components should be installed inside the boat.

Most importantly, unlike hydraulic trim tabs, there is no oil leaking out. The actuator incorporates a standard or low profile transom mounting bracket.

Features:

All tabs are sealed with a corrosion-resistant epoxy coating
Strength equivalent to 10 gauge stainless steel
"No Break" polypropylene hinge tested to 300,000 cycles up to90° bend without failure
The upper cylinder seal location cannot be damaged due to a dirty cylinder or barnacle growth
Uses a internal pressure equalization system
Internal braking system prevents unwanted movement of the tab while driving or reversing
Quiet operation
Actuators are fully load tested to push at 1,000 pounds of force
Non-metallic external structure that cannot corrode and will not deteriorate in sunlight or under water

Technical specifications:

Trim tab size (L x W) - 12" x 18" (30 x 46 cm)
Boat Length - 20' to 40' (6 to 12 M)
Trim Material - Marine Grade 6005-T5 Aluminum Alloy
DC Voltage of Trim Actuator - 12V
Actuator Stroke Length - 2.25" (57mm)
Cable LengthActuator Height - 23' (7M)
Actuator Vertical Height - 11.875" (302mm)
Control Dimensions (W x H) - 3 .15" x 3.07" (80 x 77 mm)
Control mounting hole cutout - 2" (50 mm)
Control operating voltage - 12 or 24 V

In the box:

One (1) manual leveling control
Two (2) aluminum alloy tabs
Two (2) actuators with 23' (7M) cables
Instruction Manual

*Sold as a kit

Save $191 when you purchase the Lectrotab XKA Aluminum Alloy Trim Tab Kit with Control MLC-1 - 12 x 18 for only $1,086 from NVN Marine, same day shipping! at 3 p.m. Lectrotab Compensating tabs Supplier:

Lectrotab

Trim Tab Kit Lectrotab XKA Aluminum Alloy Trim Tab Kit with MLC-1 Control - 12 x 18 User Reviews Lectrotab 'detailed shipping, please check our shipping policy and you can find our return and refund policy here.