Lectrotab XKA Stainless Steel Decorative Tab Kit with ALC-1 Control - 9 x 12 Bestsellers

XKA Stainless Steel Trim Tab Kit with ALC-1 Control - 9 x 12

Lectrotab stainless steel trim tab design provides unmatched strength and reliability . All stainless steel tabs are manufactured with a continuous rolled and pinned hinge. This design eliminates the need for welding.

Combined with a precision actuator, this kit is designed to combine quiet operation with a non-hydraulic, maintenance-free design. The unit is corrosion free, ensures very precise tab positioning, provides maximum lifting force and is completely self-contained for easy installation. The actuator assembly is packaged in a permanently sealed non-metallic enclosure. No components should be installed inside the boat.

Most importantly, unlike hydraulic trim tabs, there is no oil leaking. The actionnneur incorporates a standard or low profile transom mounting bracket.

Auto Level Control (ALC) will automatically adjust your trim tabs to maintain a level boat for a more comfortable and enjoyable ride. Additionally, ALC automatically corrects side-to-side roll and fore-and-aft pitch to enhance your boating experience and improve your fuel economy.

Features :

Continuous rolled and pinned hinge provides increased strength and eliminates the need for welding
The location of the cylinder top joint cannot be damaged due to a clogged cylinder or barnacle growth
Uses internal pressure equalization system
Internal braking system prevents unwanted movement of the tab by while traveling or in reverse
Quiet operation
The aactuators are fully load tested to push 1,000 lbs of force
Non-metallic external structure that cannot corrode and will not deteriorate in sunlight or under water

Technical specifications:

Trim tab size (L x W): 9" x 12" (23 x 30 cm)
Boat Length - 16' to 25' (5 to 7.5 M)
Trim Tab Material: 12 gauge, 304 Stainless Steel
Actuator DC Voltage - 12 V
Actuator stroke length - 2.25" (57 mm)
Actuator cable length - 23' (7 M)
Vertical actuator height - 11.875" (302 mm)
Control dimensions (W x H) - 3.15" x 3.07" (80 x 77 mm)
Control Mounting hole cutout - 2" (50 mm)
Control operating voltage - 12 or 24 V

In the box:

One (1) automatic leveling control
Two (2) steel tabsstainless
Two (2) actuators with 23' (7M) cables
Instruction manual

*Sold as a kit

Lectrotab XKA stainless steel decorative tab kit with ALC-1 control - 9 x 12 Product description

XKA stainless steel decorative tab kit with ALC-1 control - 9 x 12

The design of Lectrotab stainless steel trim tabs offers unrivaled strength and reliability. All stainless steel tabs are manufactured with a continuous rolled and pinned hinge. This design eliminates the need for welding.

Most importantly, unlike hydraulic trim tabs, there is no oil leaking. The actuator incorporates a standard or low profile transom mounting bracket.

Features :

Continuous rolled and pinned hinge provides increased strength and eliminates the need for welding
The location of the cylinder top joint cannot be damaged due to a dirty cylinder or barnacle growth
Uses internal pressure equalization system
Internal braking system prevents movement indesirable tab while driving or reversing
Quiet operation
Actuators are fully load tested to push 1,000 lbs of force
Structure non-metallic external that cannot corrode and will not deteriorate in sunlight or underwater

Technical specifications:

Trim Tab Size (L x W) - 9" x 12" (23 x 30 cm)
Boat Length: 16 - 25 ft (5 - 7.5 M)
Trim Tab Material - 12 Gauge, 304 Stainless Steel
Actuator DC Voltage - 12V
Actuator Stroke Length - 2, 25" (57 mm)
Actuator cable length - 23' (7 M)
Actuator vertical height - 11.875" (302 mm)
Control Dimensions (W x H) - 3.15" x 3.07" (80 x 77 mm)
Control Mounting Hole Cutout - 2" (50 mm) )
Control operating voltage - 12 or 24 V

In the box:

One (1) automatic leveling control
Two (2) stainless steel tabs
Two (2) actuators with 23' (7M) cables
Instruction manual

*Sold as a kit

Save $306 when you purchase the Lectrotab XKA Stainless Steel Trim Tab Kit with ALC-1 Control - 9 x 12 for only 1,734 $from NVN Marine! Same Day Dispatch by 3:00 PM Lectrotab XKA Stainless Steel Trim Tab Kit with ALC-1 Control - Technical Specifications 9x12 Type:

Boat fitting out | Compensating tabs

Supplier:

Lectrotab

Lectrotab XKA Stainless Steel Trim Tab Kit with ALC-1 Control - 9 x 12 User Reviews Lectrotab XKA Stainless Steel Trim Tab Kit with ALC-1 Control - 9 x 12Shipping & Return

For detailed shipping policy, please check our shipping policy and you can find our return & refund policy here.