Lectrotab XKA Stainless Steel Decorative Tab Kit with Rocker Switch - 9 x 24 Boat Outfitting

XKA Stainless Steel Trim Tab Kit with Toggle Switch - 9 x 24

The Lectrotab stainless steel trim tab design provides unmatched strength and reliability. All stainless steel tabs are manufactured with a continuous rolled and pinned hinge. This design eliminates the need for welding.

Combined with a precision actuator, this kit is designed to combine quiet operation with a non-hydraulic, maintenance-free design. The unit is corrosion free, ensures very precise tab positioning, provides maximum lifting force and is completely self-contained for easy installation. The actuator assembly is packaged in a permanently sealed non-metallic enclosure. No components should be installed inside the boat.

Most importantly, unlike hydraulic trim tabs, there is no oil leaking. The actuator incorporates a standard or low profile transom mounting bracket.

Lectrotab's new flat toggle switch has improved sealing to prevent the entry and receipt of water.toggle to prevent breakage. Specially designed to provide an "instant stop" circuit when the switches are released, preventing actuator overshoot.

Features:

Continuous Rolled and pinned hinge provides increased strength and eliminates the need for welding.
The cylinder top seal location cannot be damaged due to cylinder growth or dirty barnacle
Uses an internal pressure equalization system
Internal braking system prevents unwanted movement of the tongue while driving or reversing
Quiet operation
Actuators are fully load tested to push 1,000 lbss of strength
Non-metallic external structure that cannot corrode and will not deteriorate in sunlight or under water

Technical specifications:

Trim Tab Size (L x W): 9" x 24" (23 x 61 cm)
Boat Length: 24' to 37 ' (7 to 11M)
Trim Tab Material - 12 Gauge, 304 Stainless Steel
Actuator DC Voltage - 12V
ActuatorStroke Length: 2.25" (57mm)
Actuator Cable Length - 23' (7M)
Actuator Vertical Height - 11.875" ( 302 mm)
Toggle Switch Dimensions (W x H): 3.125" x 3.25" (79.4 x 82.5 mm)
Hole Cutout Rocker Switch Mounting Hole (H x W) - 2.25" x 2" (57.5 x 50 mm)
Rocker Switch Operating Voltage - 12 or 24V

In the box:

One (1) Flat Rocker Switch
Two (2 ) tabsstainless steel
Two (2) actuators with 23' (7M) cables
Instruction manual

*Sold as a kit

Lectrotab XKA Stainless Steel Trim Tab Kit with Toggle Switch - 9 x 24 Product Description

XKA Stainless Steel Trim Tab Kit with Toggle Switch - 9 x 24

The Lectrotab in stainless steel The design of the steel trim tabs offers unrivaled strength and reliability. All stainless steel tabs are manufactured with a continuous rolled and pinned hinge. This design eliminates the need for welding.

Most importantly, unlike hydraulic trim tabs, there is no oil leaking. The actuator incorporates a standard or low profile transom mounting bracket.

Lectrotab's new flat toggle switch features improved sealing to prevent water entry and a recessed toggle to prevent breakage. Specially designed to provide an "instant stop" circuit when the switches are released, preventing actuator overshoot.

Features:

Continuous Rolled and pinned hinge provides increased strength and eliminates the need for welding.
The cylinder top seal location cannot be damaged due to cylinder growth or dirty barnacle
Uses an internal pressure equalization system
Internal braking system prevents unwanted tongue movementwhile underway or in reverse
Quiet operation
Actuators are fully load tested to push 1,000 lbs of force
Non-metallic external structure that cannot corrode and will not deteriorate in sunlight or under water

Technical specifications:

Trim Size Tongue Length (L x W): 9" x 24" (23 x 61 cm)
Boat Length: 24' to 37' (7 to 11 M)
Trim Tab Material - 12 Gauge, 304 Stainless Steel
Actuator DC Voltage - 12V
Actuator Stroke Length - 2.25" (57mm)
Actuator Cable Length - 23' (7 M)
Actuator Vertical Height - 11.875" (302 mm)
Actuator Dimensions Rocker Switch (L x H) - 3.125" x 3.25" (79.4 x 82.5 mm)
Toggle Switch Mounting Hole Cutout (H x W) - 2.25" x 2" (57.5 x 50 mm)
Toggle switch operating voltage - 12 or 24 V

In the box:

One (1) flat toggle switch
Two (2) stainless steel tabs
Two (2) actuators with 23' (7M) cables
Instruction manual

*Sold as a kit

Save $203 when you purchase the Lectrotab XKA Stainless Steel Decorative Tab Kit with Toggle Switch - 9 x 24for only $1,155 from NVN Marine! Same day dispatch before 3 p.m. Lectrotab Compensating tabs Supplier:

Lectrotab

Lectrotab XKA Stainless Steel Trim Tab Kit with Toggle Switch - 9 x 24 User ReviewsLectrotab XKA Stainless Steel Trim Tab Kitdable with toggle switch - 9 x 24 Shipping & Return

For detailed shipping policy, please see our shipping policy and you can find our return & refund policy here.